Files
HomeAgent/internal/plugin/stopall_parallel_test.go
JianFeeeee 6d38a164eb chore(module): Go module 路径随托管地迁移 gitcode → github
## 背景

仓库早已迁移到 GitHub(`github.com/JianFeeeee/HomeAgent`,CI/CD 都在那边跑),
gitcode 保留为**国内只读镜像**(`ci.yml` 的 sync-gitcode-main 快进推送)。
但 go.mod 的 module 路径一直是 `gitcode.com/JianFeeeee/...` —— 既与权威源
不符,`meta.SourceURL`(AGPL §13 的源码提供入口)也指向镜像而非实际运行的代码。

## 关键区分(这是本次改动安全的前提)

两个 module 是**不同**的,影响面差一个数量级:

| module | 谁依赖 | 改它的后果 |
|---|---|---|
| `.../HomeAgent`(主仓) | **只有主仓自己** | 内部重构,零外部影响 |
| `.../homeagent-sdk`(SDK 仓) | 主仓 49 文件 + 所有外部插件 | 需重编插件 |

★ 实测确认:**插件不 import 主仓 module**(`strings qq/plugin.bin | grep HomeAgent` = 0),
只依赖 SDK 仓。而插件与内核的边界是 **RPC 方法名字符串**
(`plugin.init` / `tool.invoke`…,见 proc/protocol.go),**与 Go module 名无关**。
⇒ module 改名**不改变任何 wire 协议**,现网已装的插件照常运行。

SDK 的 GitHub 仓名是 `homeagentsdk`(无连字符),module 路径必须与之精确匹配,
否则 `go get` 会因路径不符失败,故取 `github.com/JianFeeeee/homeagentsdk`。

## 改动

- `go.mod` / `go.sum`:两个 module 路径 + require/replace
- 277 个 Go 文件 + Makefile + 打包脚本的 import 与 ldflags 路径
- SDK 仓 `meta.CoreModule`、`tools/hmapdev` 的 module 声明与工程模板
- 对外文档/链接的仓库地址(README、PLUGIN_DEV、OVERVIEW 等)

## 明确**保留** gitcode 的地方(镜像机制,不能动)

- `GITCODE_TOKEN`、`GC_URL="…@gitcode.com"`(CI 同步 job)
- `gitcode.com/api/v5/...`(release 附件上传)
- git remote `gitcode`(镜像拉取/推送)
- `docs/zh/ci-cd-runbook.md`(整篇讲镜像运维)

## 验证

- `go build ./...` / `go vet ./...` 绿
- `go test ./... -count=1` → 48 包 ok / 0 FAIL
- hmapdev 工具链编译通过(`third_party/homeagent-sdk/tools/hmapdev`)
- 全仓残留检查:module 形态的 `gitcode.com/JianFeeeee` = 0
- 镜像机制抽验:GC_URL / @gitcode / api/v5 / remote 均完好

## 顺带修正

`hmapdev/templates.go` 的注释此前写「gitcode 的模块不在 proxy.golang.org 上」——
module 已迁 GitHub,该论断不再成立。改为如实说明**为何仍默认 replace 到本机 SDK**:
离线可构建、避免版本漂移、内网可用。理由与托管地无关,故 replace 保留。
2026-10-08 10:40:17 +08:00

191 lines
5.0 KiB
Go
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

package plugin
import (
"sync"
"sync/atomic"
"testing"
"time"
sdk "github.com/JianFeeeee/HomeAgent/internal/sdk"
)
// ===== StopAll 并行化 =====
//
// 串行停 23 个插件、每个最坏 5s(plugin.stop 调用)+5s(等退出)+2s(收割)
// = 最坏 276s,而 systemd 只给 90s ⇒ 关停几乎必然被 SIGKILL。
// 线上实测:每次 stop 都 "State 'stop-sigterm' timed out",
// 进程组里 23 个插件全退完了,最后那条 [homed] stopped 仍打不出来。
//
// 并行后最坏约等于单个插件的预算(约 12s),而不是 N 倍。
//
// ★ 并行化最大的风险是死锁与重复释放:Stop 会触发 markExited →
// onExit → ReclaimOwner,后者要读共享内存段。所以判据同时盯
// "真的并行"与"不死锁、不错杀"。
// stubPlugin 是最小可用插件。
type stubPlugin struct {
name string
delay time.Duration
stopped atomic.Bool
panicOnStop bool
stopCount atomic.Int32
}
func newStubPlugin(name string, delay time.Duration) *stubPlugin {
return &stubPlugin{name: name, delay: delay}
}
func (s *stubPlugin) Name() string { return s.name }
func (s *stubPlugin) Start(*sdk.PluginSDK) error { return nil }
func (s *stubPlugin) Stop() error {
s.stopCount.Add(1)
if s.panicOnStop {
panic("stub: 故意 panic")
}
if s.delay > 0 {
time.Sleep(s.delay)
}
s.stopped.Store(true)
return nil
}
// StopAll 必须真的并行,否则退回串行 = 关停超时。
func TestStopAllStopsInParallel(t *testing.T) {
const n = 8
const each = 120 * time.Millisecond
var plugins []sdk.Plugin
var stubs []*stubPlugin
for i := 0; i < n; i++ {
s := newStubPlugin("p", each)
_ = i
stubs = append(stubs, s)
plugins = append(plugins, s)
}
r := &Registry{instances: plugins}
start := time.Now()
r.StopAll()
elapsed := time.Since(start)
serial := n * each
// 串行实现会耗时 serial;留一半余量仍能可靠区分。
if elapsed > serial/2 {
t.Errorf("StopAll 是串行的:%d 个插件各 %v 用了 %v(串行≈%v,并行应≈%v)",
n, each, elapsed, serial, each)
}
for _, s := range stubs {
if !s.stopped.Load() {
t.Errorf("插件 %s 没被停掉", s.name)
}
}
}
// 一个插件 panic 不能带崩整个关停,也不能让其它插件停不掉。
func TestStopAllSurvivesPanickingPlugin(t *testing.T) {
bad := newStubPlugin("bad", 0)
bad.panicOnStop = true
good := newStubPlugin("good", 0)
r := &Registry{instances: []sdk.Plugin{bad, good}}
done := make(chan struct{})
go func() {
defer close(done)
defer func() {
if rec := recover(); rec != nil {
t.Errorf("插件的 panic 不该冒到关停流程上:%v", rec)
}
}()
r.StopAll()
}()
select {
case <-done:
case <-time.After(10 * time.Second):
t.Fatal("StopAll 卡死(可能死锁)")
}
if !good.stopped.Load() {
t.Error("一个插件 panic 不该让其它插件停不掉")
}
}
// 关停期间必须冻结自动重启,否则崩溃判定会在关停中把插件重新拉起
// (段已拆而进程还在 → SIGBUS)。
func TestStopAllFreezesAutoRestart(t *testing.T) {
s := newStubPlugin("p", 0)
r := &Registry{instances: []sdk.Plugin{s}}
r.StopAll()
if !r.shuttingDown.Load() {
t.Error("StopAll 之后 shuttingDown 应为 true")
}
if r.instances != nil {
t.Error("StopAll 之后 instances 应被清空")
}
}
// 每个插件恰好 Stop 一次:重复调用会二次释放共享段/重复跑 stop handler。
func TestStopAllStopsEachPluginExactlyOnce(t *testing.T) {
var plugins []sdk.Plugin
var stubs []*stubPlugin
for i := 0; i < 5; i++ {
s := newStubPlugin("p", 0)
stubs = append(stubs, s)
plugins = append(plugins, s)
}
r := &Registry{instances: plugins}
r.StopAll()
for _, s := range stubs {
if c := s.stopCount.Load(); c != 1 {
t.Errorf("Stop 被调 %d 次,应恰好 1 次", c)
}
}
}
// stop handler 必须在 Stop 之前跑完(handler 负责解绑通道等),
// 且并行化后这个顺序不能被破坏。
//
// handler 挂在 PluginSDK 上(RegisterStopHandler),由 runStopHandlers
// 通过 r.sdkRefs 取出执行 —— 所以判据必须真的构造一个 PluginSDK,
// 否则测的是一条不存在的注册路径。
func TestStopAllRunsStopHandlerBeforeStop(t *testing.T) {
var mu sync.Mutex
var order []string
s := newStubPlugin("p", 0)
r := &Registry{
instances: []sdk.Plugin{s},
sdkRefs: map[string]*sdk.PluginSDK{},
}
sdkn := sdk.New("p", sdk.SDKConfig{})
sdkn.RegisterStopHandler(func() {
mu.Lock()
order = append(order, "handler")
mu.Unlock()
})
r.sdkRefs["p"] = sdkn
probe := &orderProbePlugin{stubPlugin: s, onStop: func() {
mu.Lock()
order = append(order, "stop")
mu.Unlock()
}}
r.instances = []sdk.Plugin{probe}
r.StopAll()
mu.Lock()
defer mu.Unlock()
if len(order) != 2 || order[0] != "handler" || order[1] != "stop" {
t.Errorf("stop handler 必须先于 Stop 执行,实际顺序 %v", order)
}
}
type orderProbePlugin struct {
*stubPlugin
onStop func()
}
func (o *orderProbePlugin) Stop() error {
o.onStop()
return o.stubPlugin.Stop()
}