feat: 密钥静态加密 + /api/v1 agent 管理 API

密钥加密（写侧封存 / 读侧解封）
- config.yaml 的 sources[].api_key、sources[].headers、keys[].key 落盘即
  AES-256-GCM 密文（enc:v1: 前缀），master.key 复用 runtime store 那把
- 内存里永远是明文：鉴权比对、API 返回新建 key、WebUI 编辑回填都不受影响
- 启动时一次性封存现存明文（幂等，已封存则不写盘）；-check 不写文件
- UpsertSourceInYAML 增加 box 参数，新加的源不再以明文落盘
- 解密失败改为硬错误：原先 MustDecrypt 返回密文会被下次 Save 二次封存
  （实测：源 key 18→20、静默损坏），现在启动即失败且配置分毫不动

/api/v1：面向 agent 的管理 API（WebUI 零影响）
- GET /api/v1            机器可读索引，列出每个端点的方法/权限/用途
- GET /api/v1/overview   一次调用看全貌：源 + AUTO 链 + 密钥数 + 健康度
- GET /api/v1/health     仅健康快照
- GET /api/v1/models     按源分组的可路由模型清单
- GET /api/v1/sources[/{name}]  凭据遮蔽后的源
- GET /api/v1/auto       调度链与实时槽位状态
- GET /api/v1/keys       admin only，密钥元数据，绝不回显密钥本身
- 沿用同一套网关 key 鉴权；读端点任意角色，写仍需 admin

测试：15 个新用例（含负向：泄密、越权、写操作必须被拒）
变异验证：maskKey 不遮蔽→红、去掉 admin 校验→红

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

internal/config/config.go

@@ -27,6 +27,11 @@ type Config struct {
 	Auto          []ModelScope `yaml:"auto,omitempty"`       // AUTO 调度链规则（WebUI 优先级页编辑，chat）
 	AutoImage     []ModelScope `yaml:"auto_image,omitempty"` // AUTO 生图调度链规则（WebUI 优先级页·生图）
 	Keys          []GWKey      `yaml:"keys,omitempty"`       // 网关密钥（WebUI 密钥页管理）
+	// box seals credentials (sources' api_key/headers, keys' key) at rest.
+	// In-memory values are always plaintext; only the bytes on disk are sealed.
+	// Wired by AttachSecretBox — Load leaves it nil so `-check` and tests stay
+	// filesystem-free.
+	box *SecretBox
 }
 
 // Defaults applied to any source (YAML or runtime) that leaves a field unset.
@@ -192,10 +197,15 @@ func RemoveSourceFromYAML(path, name string) error {
 
 // UpsertSourceInYAML adds or updates a source entry in the YAML config file.
 // Uses yaml.Node to preserve the rest of the file's comments and formatting.
-func UpsertSourceInYAML(path, name string, src Source) error {
+// When box is non-nil the source's credentials are sealed before writing, so a
+// newly added source never lands in the file as plaintext.
+func UpsertSourceInYAML(path, name string, src Source, box *SecretBox) error {
 	if path == "" {
 		return fmt.Errorf("config path is empty")
 	}
+	if err := sealSource(&src, box); err != nil {
+		return err
+	}
 	data, err := os.ReadFile(path)
 	if err != nil {
 		return err
@@ -253,11 +263,17 @@ func UpsertSourceInYAML(path, name string, src Source) error {
 
 // Save writes the current config back to the YAML file (preserving comments
 // via yaml.Node round-trip when possible, or full marshaling as fallback).
+// Credentials are sealed on the way out and the in-memory copy is restored to
+// plaintext afterwards, so callers keep working with usable values.
 func (c *Config) Save() error {
 	if c.Path == "" {
 		return fmt.Errorf("config path is empty")
 	}
+	if err := c.sealInPlace(c.box); err != nil {
+		return err
+	}
 	out, err := yaml.Marshal(c)
+	c.unsealAfterWrite(c.box)
 	if err != nil {
 		return fmt.Errorf("marshal config: %w", err)
 	}

internal/config/secret_config.go

@@ -0,0 +1,227 @@
+package config
+
+// Secret handling for config.yaml.
+//
+// config.yaml is 0644 world-readable by design (ops need to inspect it), so any
+// credential in it must not sit there in plaintext. Sources' api_key / headers
+// and gateway keys are therefore sealed at rest with the same SecretBox used by
+// the runtime store, and unsealed in memory at load time.
+//
+// The invariant that makes this safe: **in-memory values are always plaintext**,
+// and the enc:v1: prefix is what marks a file value as sealed. Read paths that
+// predate this (core.resolveSourceKey) already unseal, so only the write side and
+// the load-time normalize step are new.
+
+import (
+	"fmt"
+	"log"
+	"strings"
+)
+
+// sealSource seals one source's credentials in place (used by the YAML upsert
+// path, which is a package function and therefore has no Config to borrow a box
+// from).
+func sealSource(s *Source, box *SecretBox) error {
+	if box == nil {
+		return nil
+	}
+	if s.APIKey != "" && !strings.HasPrefix(s.APIKey, encPrefix) {
+		v, err := box.Encrypt(s.APIKey)
+		if err != nil {
+			return err
+		}
+		s.APIKey = v
+	}
+	for k, v := range s.Headers {
+		if v == "" || strings.HasPrefix(v, encPrefix) {
+			continue
+		}
+		e, err := box.Encrypt(v)
+		if err != nil {
+			return err
+		}
+		s.Headers[k] = e
+	}
+	return nil
+}
+
+// normalizeSecrets unseals every credential in the freshly parsed config so the
+// rest of the program only ever sees plaintext. A value without the enc:v1:
+// prefix is left untouched, which keeps hand-written plaintext configs working
+// (and is what a pre-encryption config file looks like).
+//
+// A value that carries the prefix but fails to decrypt is a hard error, not
+// something to paper over: returning the ciphertext (MustDecrypt's behavior)
+// would let the next Save re-seal it and turn one bad value into permanent,
+// compounding corruption. Losing the master key must be loud.
+func (c *Config) normalizeSecrets(box *SecretBox) error {
+	if box == nil {
+		return nil
+	}
+	for i := range c.Sources {
+		s := &c.Sources[i]
+		if strings.HasPrefix(s.APIKey, encPrefix) {
+			v, err := box.Decrypt(s.APIKey)
+			if err != nil {
+				return fmt.Errorf("source %q api_key: %w", s.Name, err)
+			}
+			s.APIKey = v
+		}
+		for k, v := range s.Headers {
+			if strings.HasPrefix(v, encPrefix) {
+				d, err := box.Decrypt(v)
+				if err != nil {
+					return fmt.Errorf("source %q header %q: %w", s.Name, k, err)
+				}
+				s.Headers[k] = d
+			}
+		}
+	}
+	for i := range c.Keys {
+		if strings.HasPrefix(c.Keys[i].Key, encPrefix) {
+			v, err := box.Decrypt(c.Keys[i].Key)
+			if err != nil {
+				return fmt.Errorf("gateway key %q: %w", c.Keys[i].Name, err)
+			}
+			c.Keys[i].Key = v
+		}
+	}
+	return nil
+}
+
+// sealInPlace replaces plaintext credentials with ciphertext for writing. It is
+// deliberately a separate step from Marshal: callers that need the plaintext
+// (auth comparisons, log output, returning a key to the operator who just
+// created it) must not be handed a sealed config by accident.
+func (c *Config) sealInPlace(box *SecretBox) error {
+	if box == nil {
+		return nil
+	}
+	for i := range c.Sources {
+		s := &c.Sources[i]
+		if s.APIKey != "" && !strings.HasPrefix(s.APIKey, encPrefix) {
+			v, err := box.Encrypt(s.APIKey)
+			if err != nil {
+				return err
+			}
+			s.APIKey = v
+		}
+		if len(s.Headers) > 0 {
+			sealed := make(map[string]string, len(s.Headers))
+			for k, v := range s.Headers {
+				if v == "" || strings.HasPrefix(v, encPrefix) {
+					sealed[k] = v
+					continue
+				}
+				e, err := box.Encrypt(v)
+				if err != nil {
+					return err
+				}
+				sealed[k] = e
+			}
+			s.Headers = sealed
+		}
+	}
+	for i := range c.Keys {
+		k := &c.Keys[i]
+		if k.Key != "" && !strings.HasPrefix(k.Key, encPrefix) {
+			v, err := box.Encrypt(k.Key)
+			if err != nil {
+				return err
+			}
+			k.Key = v
+		}
+	}
+	return nil
+}
+
+// unsealAfterWrite restores plaintext after a sealed marshal so the live process
+// keeps working on plaintext values (mirrors Store.persistLocked's dance).
+func (c *Config) unsealAfterWrite(box *SecretBox) {
+	// Save just encrypted every value it can see, so a failure here is
+	// impossible; ignore the error rather than panic in a write path.
+	_ = c.normalizeSecrets(box)
+}
+
+// hasPlaintextSecrets reports whether any credential in the config is still in
+// the clear. Used to decide whether a startup migration write is needed, and to
+// warn (without leaking values) when no master key is available.
+func (c *Config) hasPlaintextSecrets() bool {
+	for _, s := range c.Sources {
+		if s.APIKey != "" && !strings.HasPrefix(s.APIKey, encPrefix) {
+			return true
+		}
+		for _, v := range s.Headers {
+			if v != "" && !strings.HasPrefix(v, encPrefix) {
+				return true
+			}
+		}
+	}
+	for _, k := range c.Keys {
+		if k.Key != "" && !strings.HasPrefix(k.Key, encPrefix) {
+			return true
+		}
+	}
+	return false
+}
+
+// countPlaintextSecrets returns how many credentials are still in the clear, for
+// an operator-facing migration log line that must not print the values.
+func (c *Config) countPlaintextSecrets() int {
+	n := 0
+	for _, s := range c.Sources {
+		if s.APIKey != "" && !strings.HasPrefix(s.APIKey, encPrefix) {
+			n++
+		}
+		for _, v := range s.Headers {
+			if v != "" && !strings.HasPrefix(v, encPrefix) {
+				n++
+			}
+		}
+	}
+	for _, k := range c.Keys {
+		if k.Key != "" && !strings.HasPrefix(k.Key, encPrefix) {
+			n++
+		}
+	}
+	return n
+}
+
+// NormalizeSecretsForRun unseals the loaded config and then seals it back on
+// disk if anything was still in the clear. Order matters: Load() read the file
+// with ciphertext still in place, so the unseal has to happen before the
+// registry (and any Save the startup path performs) sees the values.
+func (c *Config) NormalizeSecretsForRun(box *SecretBox) error {
+	c.AttachSecretBox(box)
+	if err := c.normalizeSecrets(box); err != nil {
+		return err
+	}
+	return c.migratePlaintextSecrets()
+}
+
+// AttachSecretBox wires the encryption box into the config so Save can seal
+// credentials. Kept as an explicit call (rather than a constructor argument) so
+// config.Load stays usable in contexts that have no filesystem secrets (tests,
+// `-check`).
+func (c *Config) AttachSecretBox(box *SecretBox) { c.box = box }
+
+// SecretBox returns the wired encryption box, or nil when none is attached.
+func (c *Config) SecretBox() *SecretBox { return c.box }
+
+// migratePlaintextSecrets seals any credential still in the clear and writes the
+// file once. It is idempotent: a config that is already sealed (or has no
+// secrets) is left alone and nothing is written.
+func (c *Config) migratePlaintextSecrets() error {
+	if c.box == nil || c.Path == "" {
+		return nil
+	}
+	if !c.hasPlaintextSecrets() {
+		return nil
+	}
+	n := c.countPlaintextSecrets()
+	if err := c.Save(); err != nil {
+		return err
+	}
+	log.Printf("[config] sealed %d plaintext credential(s) in %s", n, c.Path)
+	return nil
+}

internal/config/secret_config_test.go

@@ -0,0 +1,283 @@
+package config
+
+import (
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+)
+
+// writeMasterKey plants a deterministic master.key next to the given runtime
+// file so tests exercise the real box instead of the env-var shortcut.
+func writeMasterKey(t *testing.T, runtimeFile string) *SecretBox {
+	t.Helper()
+	if err := os.WriteFile(filepath.Join(filepath.Dir(runtimeFile), "master.key"),
+		[]byte(strings.Repeat("ab", 32)), 0600); err != nil {
+		t.Fatal(err)
+	}
+	box, err := NewSecretBox(runtimeFile)
+	if err != nil {
+		t.Fatalf("NewSecretBox: %v", err)
+	}
+	return box
+}
+
+func TestSaveSealsCredentialsAndLoadUnseals(t *testing.T) {
+	dir := t.TempDir()
+	path := filepath.Join(dir, "config.yaml")
+	runtime := filepath.Join(dir, "runtime.json")
+	box := writeMasterKey(t, runtime)
+
+	cfg := &Config{
+		Path:   path,
+		Listen: "127.0.0.1:0",
+		Sources: []Source{{
+			Name:    "up",
+			BaseURL: "http://up/v1",
+			APIKey:  "sk-plaintext-secret",
+			Adapter: "openai",
+			Headers: map[string]string{"X-Extra": "header-secret"},
+			Models:  []Model{{ID: "m", Kind: "chat"}},
+		}},
+		Keys: []GWKey{{Key: "sk-gw-plain", Role: "admin", Name: "admin"}},
+	}
+	cfg.AttachSecretBox(box)
+	if err := cfg.Save(); err != nil {
+		t.Fatalf("Save: %v", err)
+	}
+
+	raw, err := os.ReadFile(path)
+	if err != nil {
+		t.Fatal(err)
+	}
+	text := string(raw)
+	if strings.Contains(text, "sk-plaintext-secret") {
+		t.Error("source api_key written in plaintext")
+	}
+	if strings.Contains(text, "header-secret") {
+		t.Error("source header written in plaintext")
+	}
+	if strings.Contains(text, "sk-gw-plain") {
+		t.Error("gateway key written in plaintext")
+	}
+	if n := strings.Count(text, encPrefix); n != 3 {
+		t.Errorf("expected 3 sealed values, found %d", n)
+	}
+
+	// The live in-memory config must still hold plaintext after Save.
+	if cfg.Sources[0].APIKey != "sk-plaintext-secret" {
+		t.Errorf("in-memory api_key mutated by Save: %q", cfg.Sources[0].APIKey)
+	}
+	if cfg.Keys[0].Key != "sk-gw-plain" {
+		t.Errorf("in-memory gateway key mutated by Save: %q", cfg.Keys[0].Key)
+	}
+
+	// A fresh load must hand back plaintext again.
+	loaded, err := Load(path)
+	if err != nil {
+		t.Fatalf("Load: %v", err)
+	}
+	loaded.AttachSecretBox(box)
+	loaded.normalizeSecrets(box)
+	if loaded.Sources[0].APIKey != "sk-plaintext-secret" {
+		t.Errorf("loaded api_key = %q, want plaintext", loaded.Sources[0].APIKey)
+	}
+	if loaded.Sources[0].Headers["X-Extra"] != "header-secret" {
+		t.Errorf("loaded header = %q, want plaintext", loaded.Sources[0].Headers["X-Extra"])
+	}
+	if loaded.Keys[0].Key != "sk-gw-plain" {
+		t.Errorf("loaded gateway key = %q, want plaintext", loaded.Keys[0].Key)
+	}
+}
+
+func TestPlaintextConfigStillLoads(t *testing.T) {
+	dir := t.TempDir()
+	path := filepath.Join(dir, "config.yaml")
+	// A hand-written, pre-encryption config: no enc:v1: anywhere.
+	body := `listen: 127.0.0.1:0
+sources:
+  - name: legacy
+    base_url: http://legacy/v1
+    api_key: sk-written-by-hand
+    adapter: openai
+    models:
+      - id: m
+        kind: chat
+`
+	if err := os.WriteFile(path, []byte(body), 0644); err != nil {
+		t.Fatal(err)
+	}
+	cfg, err := Load(path)
+	if err != nil {
+		t.Fatalf("Load: %v", err)
+	}
+	box := writeMasterKey(t, filepath.Join(dir, "runtime.json"))
+	cfg.AttachSecretBox(box)
+	cfg.normalizeSecrets(box)
+	if cfg.Sources[0].APIKey != "sk-written-by-hand" {
+		t.Errorf("plaintext config value changed: %q", cfg.Sources[0].APIKey)
+	}
+}
+
+func TestMigratePlaintextSecretsIsIdempotent(t *testing.T) {
+	dir := t.TempDir()
+	path := filepath.Join(dir, "config.yaml")
+	runtime := filepath.Join(dir, "runtime.json")
+	box := writeMasterKey(t, runtime)
+
+	cfg := &Config{
+		Path:    path,
+		Listen:  "127.0.0.1:0",
+		Sources: []Source{{Name: "up", BaseURL: "http://up/v1", APIKey: "sk-clear", Adapter: "openai", Models: []Model{{ID: "m"}}}},
+	}
+	cfg.AttachSecretBox(box)
+
+	if err := cfg.migratePlaintextSecrets(); err != nil {
+		t.Fatalf("first migrate: %v", err)
+	}
+	first, err := os.ReadFile(path)
+	if err != nil {
+		t.Fatal(err)
+	}
+	if !strings.Contains(string(first), encPrefix) {
+		t.Fatal("migration did not seal the value")
+	}
+	// In-memory must be plaintext so the running process keeps working.
+	if cfg.Sources[0].APIKey != "sk-clear" {
+		t.Errorf("in-memory api_key = %q, want plaintext", cfg.Sources[0].APIKey)
+	}
+
+	// Second run: already sealed => no write.
+	before, _ := os.Stat(path)
+	if err := cfg.migratePlaintextSecrets(); err != nil {
+		t.Fatalf("second migrate: %v", err)
+	}
+	after, _ := os.Stat(path)
+	if before.ModTime() != after.ModTime() {
+		t.Error("second migrate rewrote an already-sealed config")
+	}
+}
+
+func TestSealedValueDoesNotDoubleEncrypt(t *testing.T) {
+	dir := t.TempDir()
+	box := writeMasterKey(t, filepath.Join(dir, "runtime.json"))
+	cfg := &Config{Path: filepath.Join(dir, "config.yaml"), Sources: []Source{{Name: "a", BaseURL: "http://a"}}}
+	cfg.AttachSecretBox(box)
+
+	once, err := box.Encrypt("sk-x")
+	if err != nil {
+		t.Fatal(err)
+	}
+	cfg.Sources[0].APIKey = once
+	if err := cfg.Save(); err != nil {
+		t.Fatal(err)
+	}
+	got, err := box.Decrypt(cfg.Sources[0].APIKey)
+	if err != nil {
+		t.Fatalf("value became undecryptable: %v", err)
+	}
+	if got != "sk-x" {
+		t.Errorf("round trip = %q, want sk-x", got)
+	}
+}
+
+func TestUpsertSourceInYAMLSealsCredentials(t *testing.T) {
+	dir := t.TempDir()
+	path := filepath.Join(dir, "config.yaml")
+	box := writeMasterKey(t, filepath.Join(dir, "runtime.json"))
+
+	if err := os.WriteFile(path, []byte("listen: 127.0.0.1:0\nsources: []\n"), 0644); err != nil {
+		t.Fatal(err)
+	}
+	src := Source{Name: "new", BaseURL: "http://new/v1", APIKey: "sk-fresh", Adapter: "openai", Models: []Model{{ID: "m"}}}
+	if err := UpsertSourceInYAML(path, src.Name, src, box); err != nil {
+		t.Fatalf("UpsertSourceInYAML: %v", err)
+	}
+	raw, _ := os.ReadFile(path)
+	if strings.Contains(string(raw), "sk-fresh") {
+		t.Error("newly added source stored its api_key in plaintext")
+	}
+	if !strings.Contains(string(raw), encPrefix) {
+		t.Error("newly added source was not sealed")
+	}
+}
+
+func TestCountPlaintextSecrets(t *testing.T) {
+	cfg := &Config{
+		Sources: []Source{
+			{Name: "a", APIKey: encPrefix + "abc", Headers: map[string]string{"H": encPrefix + "x"}},
+			{Name: "b", APIKey: "sk-in-clear", Headers: map[string]string{"H2": "clear-too"}},
+		},
+		Keys: []GWKey{{Key: "sk-gw-clear"}},
+	}
+	if got := cfg.countPlaintextSecrets(); got != 3 {
+		t.Errorf("countPlaintextSecrets = %d, want 3", got)
+	}
+	if !cfg.hasPlaintextSecrets() {
+		t.Error("hasPlaintextSecrets = false, want true")
+	}
+	cfg.Sources[1].APIKey = encPrefix + "y"
+	cfg.Sources[1].Headers["H2"] = encPrefix + "z"
+	cfg.Keys[0].Key = encPrefix + "k"
+	if cfg.hasPlaintextSecrets() {
+		t.Error("hasPlaintextSecrets = true after sealing everything")
+	}
+}
+
+// TestNormalizeSecretsFailsLoudlyOnWrongMasterKey is the negative case that
+// guards the migration: with a wrong key, a sealed value must NOT be handed
+// back as ciphertext for a later re-seal (that compounds corruption and turns
+// one lost key file into permanently unusable config).
+func TestNormalizeSecretsFailsLoudlyOnWrongMasterKey(t *testing.T) {
+	dir := t.TempDir()
+	path := filepath.Join(dir, "config.yaml")
+	runtime := filepath.Join(dir, "runtime.json")
+	good := writeMasterKey(t, runtime)
+
+	cfg := &Config{
+		Path:    path,
+		Listen:  "127.0.0.1:0",
+		Sources: []Source{{Name: "up", BaseURL: "http://up/v1", APIKey: "sk-secret", Adapter: "openai", Models: []Model{{ID: "m"}}}},
+	}
+	cfg.AttachSecretBox(good)
+	if err := cfg.Save(); err != nil {
+		t.Fatal(err)
+	}
+	sealedOnce, err := os.ReadFile(path)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	// A different master key must be rejected, loudly. NewSecretBox derives the
+	// key path from the RUNTIME file's directory, so the wrong key has to live
+	// in a different directory — otherwise it would read the good master.key.
+	otherDir := t.TempDir()
+	if err := os.WriteFile(filepath.Join(otherDir, "master.key"),
+		[]byte(strings.Repeat("cd", 32)), 0600); err != nil {
+		t.Fatal(err)
+	}
+	badBox, err := NewSecretBox(filepath.Join(otherDir, "runtime.json"))
+	if err != nil {
+		t.Fatal(err)
+	}
+	loaded, err := Load(path)
+	if err != nil {
+		t.Fatal(err)
+	}
+	loaded.AttachSecretBox(badBox)
+	if err := loaded.NormalizeSecretsForRun(badBox); err == nil {
+		t.Fatal("expected an error with the wrong master key, got nil")
+	}
+
+	// Crucially: the file must be untouched — no second seal on top.
+	after, err := os.ReadFile(path)
+	if err != nil {
+		t.Fatal(err)
+	}
+	if string(after) != string(sealedOnce) {
+		t.Error("config file was rewritten despite the decrypt failure")
+	}
+	if n := strings.Count(string(after), encPrefix); n != strings.Count(string(sealedOnce), encPrefix) {
+		t.Errorf("sealed count changed %d -> %d (double encryption)", strings.Count(string(sealedOnce), encPrefix), n)
+	}
+}

internal/core/core.go

@@ -7,6 +7,7 @@ import (
 	"crypto/rand"
 	"encoding/hex"
 	"fmt"
+	"log"
 	"os"
 	"path/filepath"
 	"sort"
@@ -53,6 +54,10 @@ func NewFromConfig(cfg *config.Config) (*Core, error) {
 		return nil, fmt.Errorf("lua vm: %w", err)
 	}
 	c.store = config.NewStore(cfg.RuntimeFile)
+	// Share one box between the runtime store and config.yaml so a single
+	// master.key seals both files. config.Load left the config holding
+	// ciphertext (if it was sealed); unseal it now that the box exists.
+	cfg.AttachSecretBox(c.store.SecretBox())
 	if err := c.store.Load(); err != nil {
 		return nil, fmt.Errorf("runtime store: %w", err)
 	}
@@ -74,6 +79,12 @@ func NewFromConfig(cfg *config.Config) (*Core, error) {
 	if err := c.seedPresetTemplates(); err != nil {
 		return nil, fmt.Errorf("seed preset templates: %w", err)
 	}
+	// Seal any credential still in the clear in config.yaml. Idempotent: an
+	// already-sealed config is not rewritten, so a normal restart writes
+	// nothing. This is the only place that rewrites the file on startup.
+	if err := cfg.NormalizeSecretsForRun(c.store.SecretBox()); err != nil {
+		return nil, fmt.Errorf("normalize secrets: %w", err)
+	}
 	return c, nil
 }
 
@@ -439,6 +450,11 @@ func (c *Core) mergedSources() []config.Source {
 }
 
 // resolveSourceKey applies api_key_env and decrypts enc:v1: ciphertext.
+// Config values are already unsealed at startup (Config.NormalizeSecretsForRun),
+// so the decrypt branch is the belt-and-braces path for a source that arrived
+// already sealed through another route. A failure there leaves the ciphertext in
+// place, which makes the upstream reject the key loudly rather than sending an
+// empty Authorization header that might look like a config-less source.
 func (c *Core) resolveSourceKey(s config.Source) config.Source {
 	if s.APIKeyEnv != "" {
 		if v := os.Getenv(s.APIKeyEnv); v != "" {
@@ -447,7 +463,11 @@ func (c *Core) resolveSourceKey(s config.Source) config.Source {
 		return s
 	}
 	if box := c.store.SecretBox(); box != nil && strings.HasPrefix(s.APIKey, "enc:v1:") {
-		s.APIKey = box.MustDecrypt(s.APIKey)
+		if v, err := box.Decrypt(s.APIKey); err == nil {
+			s.APIKey = v
+		} else {
+			log.Printf("[core] source %s: api_key decrypt failed: %v", s.Name, err)
+		}
 	}
 	return s
 }
@@ -655,7 +675,7 @@ func (c *Core) AddSource(src config.Source) error {
 	if err := normalizeSource(&src); err != nil {
 		return err
 	}
-	if err := config.UpsertSourceInYAML(c.cfg.Path, src.Name, src); err != nil {
+	if err := config.UpsertSourceInYAML(c.cfg.Path, src.Name, src, c.cfg.SecretBox()); err != nil {
 		return err
 	}
 	// Update in-memory Sources so mergedSources() finds the entry.

internal/gateway/apiv1.go

@@ -0,0 +1,399 @@
+package gateway
+
+// Agent-facing management API.
+//
+// The Web UI has always driven the gateway through /api/*, so the management
+// surface already exists. What it lacked was anything an agent could *rely* on:
+// no way to discover the contract, no single call that answers "what is the
+// current state", and per-endpoint response shapes that make scripting brittle.
+//
+// This file adds a versioned, self-describing facade under /api/v1 without
+// touching the existing endpoints, so the Web UI keeps working unchanged while
+// agents get a stable contract:
+//
+//	GET    /api/v1                      — machine-readable index of every endpoint
+//	GET    /api/v1/overview             — one call: sources + auto chain + keys + health
+//	GET    /api/v1/sources              — sources, credentials masked
+//	GET    /api/v1/sources/{name}       — one source
+//	GET    /api/v1/auto                 — scheduling chain + live slot states
+//	GET    /api/v1/keys                 — key metadata (never the secret)
+//	GET    /api/v1/models               — every model id the gateway can route
+//	GET    /api/v1/health               — per-source health, no auth needed beyond the key
+//
+// Auth is the same gateway key as everywhere else (Authorization: Bearer, or
+// ?api_key=, or the gw_key cookie). Read endpoints accept any role; writes
+// still require admin, enforced by the same middleware the UI goes through.
+
+import (
+	"errors"
+	"net/http"
+	"net/url"
+	"sort"
+	"strings"
+
+	"llmsproxy/internal/config"
+)
+
+// apiV1Routes dispatches /api/v1/*. Kept separate from routes() so the original
+// switch stays readable and the versioned surface can grow on its own.
+func (g *Gateway) apiV1Routes(w http.ResponseWriter, r *http.Request) {
+	path := strings.TrimPrefix(r.URL.Path, "/api/v1")
+	path = strings.Trim(path, "/")
+
+	switch {
+	case path == "":
+		g.apiV1Index(w, r)
+	case path == "overview":
+		g.apiV1Overview(w, r)
+	case path == "health":
+		g.apiV1Health(w, r)
+	case path == "models":
+		g.apiV1Models(w, r)
+	case path == "sources":
+		if r.Method != http.MethodGet {
+			writeError(w, http.StatusMethodNotAllowed, "method_not_allowed", "use GET")
+			return
+		}
+		writeJSON(w, http.StatusOK, map[string]interface{}{"sources": maskSources(g.core.Sources())})
+	case strings.HasPrefix(path, "sources/"):
+		name, err := decodePathSegment(strings.TrimPrefix(path, "sources/"))
+		if err != nil {
+			writeError(w, http.StatusBadRequest, "invalid_request", err.Error())
+			return
+		}
+		if r.Method != http.MethodGet {
+			writeError(w, http.StatusMethodNotAllowed, "method_not_allowed",
+				"use PUT/DELETE on /api/sources/{name} to modify a source")
+			return
+		}
+		for _, s := range g.core.Sources() {
+			if s.Name == name {
+				writeJSON(w, http.StatusOK, map[string]interface{}{"source": maskSource(s)})
+				return
+			}
+		}
+		writeError(w, http.StatusNotFound, "not_found", "no such source: "+name)
+	case path == "auto":
+		if r.Method != http.MethodGet {
+			writeError(w, http.StatusMethodNotAllowed, "method_not_allowed", "use GET")
+			return
+		}
+		writeJSON(w, http.StatusOK, map[string]interface{}{
+			"rules":       g.core.AutoRules(),
+			"image_rules": g.core.AutoImageRules(),
+			"states":      g.core.AutoSlotStates(),
+		})
+	case path == "keys":
+		if reqRole(r.Context()) != "admin" {
+			writeError(w, http.StatusForbidden, "forbidden", "admin role required")
+			return
+		}
+		if r.Method != http.MethodGet {
+			writeError(w, http.StatusMethodNotAllowed, "method_not_allowed",
+				"use POST/PUT/DELETE on /api/keys to manage keys")
+			return
+		}
+		keys := g.core.ListKeys()
+		out := make([]map[string]interface{}, 0, len(keys))
+		for _, k := range keys {
+			out = append(out, map[string]interface{}{
+				"name":       k.Name,
+				"role":       k.Role,
+				"models":     k.Models,
+				"note":       k.Note,
+				"created_at": k.CreatedAt,
+				"seed":       k.Seed,
+				// The secret itself is never echoed. An operator that needs it
+				// already has it from creation time or from config.yaml.
+				"key_prefix": maskKey(k.Key),
+			})
+		}
+		writeJSON(w, http.StatusOK, map[string]interface{}{"keys": out})
+	default:
+		g.apiV1Index(w, r)
+	}
+}
+
+// apiV1Index is the discovery document: it names every endpoint with its
+// method, auth requirement and purpose, so an agent does not have to scrape the
+// HTML to find out what it can call.
+func (g *Gateway) apiV1Index(w http.ResponseWriter, r *http.Request) {
+	type ep struct {
+		Method      string `json:"method"`
+		Path        string `json:"path"`
+		Auth        string `json:"auth"`
+		Summary     string `json:"summary"`
+		WriteEffect string `json:"writes,omitempty"`
+	}
+	index := map[string]interface{}{
+		"api_version": "v1",
+		"description": "llmsproxy management API. Authenticate with a gateway key: " +
+			"'Authorization: Bearer <key>', '?api_key=<key>', or the gw_key cookie. " +
+			"Read endpoints accept any role; mutations require an admin key.",
+		"discovery": []ep{
+			{Method: "GET", Path: "/api/v1", Auth: "any", Summary: "this document"},
+			{Method: "GET", Path: "/api/v1/overview", Auth: "any",
+				Summary: "current state in one call: sources, auto chain, key count, source health"},
+			{Method: "GET", Path: "/api/v1/health", Auth: "any",
+				Summary: "per-source health snapshot only"},
+			{Method: "GET", Path: "/api/v1/models", Auth: "any",
+				Summary: "every model id the gateway can route, grouped by owning source"},
+			{Method: "GET", Path: "/api/v1/sources", Auth: "any",
+				Summary: "all sources with credentials masked"},
+			{Method: "GET", Path: "/api/v1/sources/{name}", Auth: "any", Summary: "one source"},
+			{Method: "GET", Path: "/api/v1/auto", Auth: "any",
+				Summary: "AUTO scheduling chain and live per-slot state"},
+			{Method: "GET", Path: "/api/v1/keys", Auth: "admin",
+				Summary: "gateway key metadata; secrets are never returned"},
+
+			{Method: "GET", Path: "/api/sources", Auth: "admin", Summary: "raw source list (includes api_key)"},
+			{Method: "POST", Path: "/api/sources", Auth: "admin", Summary: "add or replace a source",
+				WriteEffect: "writes config.yaml (api_key sealed at rest)"},
+			{Method: "PUT", Path: "/api/sources/{name}", Auth: "admin", Summary: "update one source",
+				WriteEffect: "writes config.yaml"},
+			{Method: "DELETE", Path: "/api/sources/{name}", Auth: "admin", Summary: "delete a source",
+				WriteEffect: "writes config.yaml"},
+
+			{Method: "GET", Path: "/api/auto", Auth: "any", Summary: "scheduling chain (readable by any role)"},
+			{Method: "PUT", Path: "/api/auto", Auth: "admin", Summary: "replace the scheduling chain",
+				WriteEffect: "writes config.yaml (the AUTO chain lives here)"},
+
+			{Method: "GET", Path: "/api/keys", Auth: "admin", Summary: "gateway keys"},
+			{Method: "POST", Path: "/api/keys", Auth: "admin", Summary: "create a gateway key",
+				WriteEffect: "writes config.yaml"},
+			{Method: "DELETE", Path: "/api/keys/{name}", Auth: "admin", Summary: "delete a gateway key",
+				WriteEffect: "writes config.yaml"},
+
+			{Method: "GET", Path: "/api/status", Auth: "any", Summary: "per-source health detail"},
+			{Method: "GET", Path: "/api/stats", Auth: "any", Summary: "usage aggregates"},
+			{Method: "GET", Path: "/api/stats/records", Auth: "any", Summary: "paged request records"},
+			{Method: "GET", Path: "/api/adapters", Auth: "admin", Summary: "installed Lua adapters"},
+			{Method: "GET", Path: "/api/source_templates", Auth: "admin", Summary: "source templates"},
+			{Method: "POST", Path: "/v1/chat/completions", Auth: "any", Summary: "OpenAI-compatible inference"},
+		},
+		"conventions": map[string]interface{}{
+			"errors":       "{ \"error\": { \"type\": <code>, \"message\": <text> } }",
+			"path_escape":  "URL-encode source and key names; {name} is a single path segment",
+			"idempotency":  "POST /api/sources and PUT /api/sources/{name} both upsert by name",
+			"config_truth": "all configuration lives in config.yaml; API writes are persisted immediately",
+		},
+	}
+	writeJSON(w, http.StatusOK, index)
+}
+
+// apiV1Overview is the "what is the current state" call an agent makes first.
+// One round trip instead of five.
+func (g *Gateway) apiV1Overview(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodGet {
+		writeError(w, http.StatusMethodNotAllowed, "method_not_allowed", "use GET")
+		return
+	}
+	sources := g.core.Sources()
+	names := make([]string, 0, len(sources))
+	modelCount := 0
+	for _, s := range sources {
+		names = append(names, s.Name)
+		modelCount += len(s.Models)
+	}
+	keys := g.core.ListKeys()
+	adminCount, userCount := 0, 0
+	for _, k := range keys {
+		if k.Role == "admin" {
+			adminCount++
+		} else {
+			userCount++
+		}
+	}
+	writeJSON(w, http.StatusOK, map[string]interface{}{
+		"api_version": "v1",
+		"summary": map[string]interface{}{
+			"source_count":      len(sources),
+			"model_count":       modelCount,
+			"gateway_key_count": len(keys),
+			"admin_key_count":   adminCount,
+			"user_key_count":    userCount,
+			"auto_slots":        len(g.core.AutoRules()),
+		},
+		"sources":    maskSources(sources),
+		"auto":       g.core.AutoRules(),
+		"auto_image": g.core.AutoImageRules(),
+		"health":     g.sourceHealthBrief(),
+		"caller": map[string]interface{}{
+			"role": reqRole(r.Context()),
+			"key":  maskKey(reqKey(r.Context())),
+		},
+	})
+}
+
+func (g *Gateway) apiV1Health(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodGet {
+		writeError(w, http.StatusMethodNotAllowed, "method_not_allowed", "use GET")
+		return
+	}
+	writeJSON(w, http.StatusOK, map[string]interface{}{"sources": g.sourceHealthBrief()})
+}
+
+// apiV1Models lists routable model ids per source, which is what an agent needs
+// to build a valid request — /v1/models flattens them and hides the owner.
+func (g *Gateway) apiV1Models(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodGet {
+		writeError(w, http.StatusMethodNotAllowed, "method_not_allowed", "use GET")
+		return
+	}
+	bySource := map[string][]string{}
+	var all []string
+	for _, s := range g.core.Sources() {
+		for _, m := range s.Models {
+			bySource[s.Name] = append(bySource[s.Name], m.ID)
+			all = append(all, m.ID)
+		}
+	}
+	sort.Strings(all)
+	all = dedupeStrings(all)
+	writeJSON(w, http.StatusOK, map[string]interface{}{
+		"count":     len(all),
+		"models":    all,
+		"by_source": bySource,
+		"note":      "request a model as \"<source>:<model>\" to pin one source, or the bare id to let the gateway choose",
+	})
+}
+
+// ---- helpers ----
+
+// maskSources returns sources with credentials replaced by a presence marker.
+// The UI still uses /api/sources (which returns real values, because its edit
+// form round-trips them); this is the safe view for programmatic callers.
+func maskSources(srcs []config.Source) []map[string]interface{} {
+	out := make([]map[string]interface{}, 0, len(srcs))
+	for _, s := range srcs {
+		out = append(out, maskSource(s))
+	}
+	return out
+}
+
+func maskSource(s config.Source) map[string]interface{} {
+	return map[string]interface{}{
+		"name":           s.Name,
+		"base_url":       s.BaseURL,
+		"adapter":        s.Adapter,
+		"endpoint":       s.Endpoint,
+		"image_endpoint": s.ImageEndpoint,
+		"api_key":        maskKey(s.APIKey),
+		"api_key_set":    s.APIKey != "",
+		"models":         s.Models,
+		"headers":        maskHeaders(s.Headers),
+		"proxy_url":      s.ProxyURL,
+		"meta":           s.Meta,
+		"temperature":    s.Temperature,
+		"max_tokens":     s.MaxTokens,
+		"max_concurrent": s.MaxConcurrent,
+		"rpm":            s.RPM,
+	}
+}
+
+func maskKey(k string) string {
+	if k == "" {
+		return ""
+	}
+	if strings.HasPrefix(k, "enc:v1:") {
+		return "(sealed)"
+	}
+	if len(k) <= 10 {
+		return k[:2] + "…"
+	}
+	return k[:6] + "…" + k[len(k)-4:]
+}
+
+func maskHeaders(h map[string]string) map[string]string {
+	if h == nil {
+		return nil
+	}
+	out := make(map[string]string, len(h))
+	for k, v := range h {
+		out[k] = maskKey(v)
+	}
+	return out
+}
+
+// sourceHealthBrief reuses the same registry status the UI's /api/status shows,
+// so the agent view and the UI view cannot drift apart. Recent-traffic counters
+// come from the same stats window, because a source that is actually serving
+// traffic must never look down just because a probe was rate-limited.
+func (g *Gateway) sourceHealthBrief() []map[string]interface{} {
+	sts := g.core.Registry().Status()
+	recent := g.stats.SourceRecent(300)
+	avgs := g.stats.SourceAverages(300)
+	for i := range sts {
+		if v, ok := recent[sts[i].Name]; ok {
+			sts[i].RecentOK = v[0]
+			sts[i].RecentErr = v[1]
+		}
+		if a, ok := avgs[sts[i].Name]; ok {
+			sts[i].AvgFirstByteMs = a.AvgFirstByteMs
+			sts[i].AvgTokPerS = a.AvgTokPerS
+		}
+	}
+	out := make([]map[string]interface{}, 0, len(sts))
+	for _, s := range sts {
+		row := map[string]interface{}{
+			"name":           s.Name,
+			"adapter":        s.Adapter,
+			"healthy":        s.Healthy,
+			"available":      s.Available,
+			"live_available": s.LiveAvailable,
+			"model_count":    len(s.Models),
+		}
+		if s.LastError != "" {
+			row["last_error"] = s.LastError
+		}
+		if s.LastChecked > 0 {
+			row["last_checked"] = s.LastChecked
+		}
+		if s.RecentOK > 0 || s.RecentErr > 0 {
+			row["recent_ok"] = s.RecentOK
+			row["recent_err"] = s.RecentErr
+		}
+		if s.AvgFirstByteMs > 0 {
+			row["avg_first_byte_ms"] = s.AvgFirstByteMs
+		}
+		if s.AvgTokPerS > 0 {
+			row["avg_tok_per_s"] = s.AvgTokPerS
+		}
+		if s.FailCount > 0 {
+			row["fail_count"] = s.FailCount
+		}
+		if s.Permanent {
+			row["permanent"] = true
+		}
+		out = append(out, row)
+	}
+	return out
+}
+
+// decodePathSegment URL-decodes one path segment and rejects an empty result,
+// so a name containing a slash cannot be silently mis-resolved.
+func decodePathSegment(seg string) (string, error) {
+	s, err := url.PathUnescape(seg)
+	if err != nil {
+		return "", err
+	}
+	if s == "" {
+		return "", errEmptySegment
+	}
+	return s, nil
+}
+
+func dedupeStrings(in []string) []string {
+	out := in[:0]
+	var last string
+	for i, s := range in {
+		if i == 0 || s != last {
+			out = append(out, s)
+		}
+		last = s
+	}
+	return out
+}
+
+// errEmptySegment marks a path like /api/v1/sources/ with no name after it.
+var errEmptySegment = errors.New("empty path segment")

internal/gateway/apiv1_test.go

@@ -0,0 +1,273 @@
+package gateway
+
+import (
+	"encoding/json"
+	"net/http"
+	"net/http/httptest"
+	"strings"
+	"testing"
+
+	"llmsproxy/internal/config"
+)
+
+// v1Gateway builds a gateway with one source and two keys, and returns the
+// secrets so a test can assert they never appear in a response.
+func v1Gateway(t *testing.T) (*Gateway, string, string) {
+	t.Helper()
+	g := newTestGateway(t, config.Source{
+		Name:    "up",
+		BaseURL: "http://up.example/v1",
+		APIKey:  "sk-up-secret",
+		Adapter: "openai",
+		Models:  []config.Model{{ID: "m1", Kind: "chat"}},
+	})
+	// The shared helper only seeds one admin key; add a user key through the
+	// core so role-gated endpoints have something to reject.
+	if _, err := g.core.CreateKey("agent", "user", nil, "test agent key"); err != nil {
+		t.Fatalf("CreateKey: %v", err)
+	}
+	rec := doReq(t, g, http.MethodGet, "/api/keys", "")
+	var doc struct {
+		Keys []config.GWKey `json:"keys"`
+	}
+	if err := json.Unmarshal(rec.Body.Bytes(), &doc); err != nil {
+		t.Fatalf("decode keys: %v", err)
+	}
+	userKey := ""
+	for _, k := range doc.Keys {
+		if k.Role == "user" {
+			userKey = k.Key
+		}
+	}
+	if userKey == "" {
+		t.Fatal("no user key was created")
+	}
+	return g, "sk-test", userKey
+}
+
+func decodeJSON(t *testing.T, body string, v interface{}) {
+	t.Helper()
+	if err := json.Unmarshal([]byte(body), v); err != nil {
+		t.Fatalf("decode %s: %v", body, err)
+	}
+}
+
+func TestAPIV1IndexIsDiscoverable(t *testing.T) {
+	g, _, _ := v1Gateway(t)
+	rec := doReq(t, g, http.MethodGet, "/api/v1", "")
+	if rec.Code != http.StatusOK {
+		t.Fatalf("status = %d, want 200: %s", rec.Code, rec.Body.String())
+	}
+	var doc struct {
+		APIVersion  string `json:"api_version"`
+		Description string `json:"description"`
+		Discovery   []struct {
+			Method  string `json:"method"`
+			Path    string `json:"path"`
+			Auth    string `json:"auth"`
+			Summary string `json:"summary"`
+		} `json:"discovery"`
+		Conventions map[string]interface{} `json:"conventions"`
+	}
+	decodeJSON(t, rec.Body.String(), &doc)
+	if doc.APIVersion != "v1" {
+		t.Errorf("api_version = %q", doc.APIVersion)
+	}
+	if doc.Description == "" {
+		t.Error("index should carry a usage description")
+	}
+	if len(doc.Discovery) == 0 {
+		t.Fatal("discovery list is empty")
+	}
+	want := map[string]bool{
+		"/api/v1/overview": false, "/api/v1/sources": false,
+		"/api/v1/auto": false, "/api/v1/models": false,
+		"/api/v1/health": false, "/api/v1/keys": false,
+		"/api/sources": false, "/api/auto": false, "/v1/chat/completions": false,
+	}
+	for _, e := range doc.Discovery {
+		if _, ok := want[e.Path]; ok {
+			want[e.Path] = true
+		}
+		if e.Method == "" || e.Path == "" || e.Auth == "" || e.Summary == "" {
+			t.Errorf("incomplete discovery entry: %+v", e)
+		}
+	}
+	for p, found := range want {
+		if !found {
+			t.Errorf("discovery is missing %s", p)
+		}
+	}
+	if doc.Conventions["errors"] == nil {
+		t.Error("conventions should document the error shape")
+	}
+}
+
+func TestAPIV1OverviewSummarisesState(t *testing.T) {
+	g, _, _ := v1Gateway(t)
+	rec := doReq(t, g, http.MethodGet, "/api/v1/overview", "")
+	if rec.Code != http.StatusOK {
+		t.Fatalf("status = %d: %s", rec.Code, rec.Body.String())
+	}
+	var doc struct {
+		Summary struct {
+			SourceCount     int `json:"source_count"`
+			ModelCount      int `json:"model_count"`
+			GatewayKeyCount int `json:"gateway_key_count"`
+		} `json:"summary"`
+		Sources []map[string]interface{} `json:"sources"`
+		Auto    []map[string]interface{} `json:"auto"`
+		Health  []map[string]interface{} `json:"health"`
+		Caller  struct {
+			Role string `json:"role"`
+		} `json:"caller"`
+	}
+	decodeJSON(t, rec.Body.String(), &doc)
+	if doc.Summary.SourceCount != 1 {
+		t.Errorf("source_count = %d, want 1", doc.Summary.SourceCount)
+	}
+	if doc.Summary.ModelCount != 1 {
+		t.Errorf("model_count = %d, want 1", doc.Summary.ModelCount)
+	}
+	if doc.Summary.GatewayKeyCount < 2 {
+		t.Errorf("gateway_key_count = %d, want >= 2", doc.Summary.GatewayKeyCount)
+	}
+	if len(doc.Sources) != 1 || doc.Sources[0]["name"] != "up" {
+		t.Errorf("sources = %+v", doc.Sources)
+	}
+	if doc.Caller.Role != "admin" {
+		t.Errorf("caller.role = %q, want admin", doc.Caller.Role)
+	}
+}
+
+func TestAPIV1NeverEchoesSecrets(t *testing.T) {
+	g, admin, user := v1Gateway(t)
+	for _, path := range []string{"/api/v1", "/api/v1/overview", "/api/v1/sources", "/api/v1/sources/up", "/api/v1/keys", "/api/v1/models", "/api/v1/health", "/api/v1/auto"} {
+		rec := doReq(t, g, http.MethodGet, path, "")
+		if rec.Code != http.StatusOK {
+			t.Fatalf("%s status = %d: %s", path, rec.Code, rec.Body.String())
+		}
+		if strings.Contains(rec.Body.String(), "sk-up-secret") {
+			t.Errorf("%s leaked the source api_key", path)
+		}
+		if admin != "" && strings.Contains(rec.Body.String(), admin) {
+			t.Errorf("%s leaked the admin gateway key", path)
+		}
+		if strings.Contains(rec.Body.String(), user) {
+			t.Errorf("%s leaked the user gateway key", path)
+		}
+	}
+	// Masking must still be useful: it says a key is configured.
+	rec := doReq(t, g, http.MethodGet, "/api/v1/sources/up", "")
+	if !strings.Contains(rec.Body.String(), `"api_key_set":true`) {
+		t.Error("masked source should report that a key is configured")
+	}
+}
+
+func TestAPIV1KeysRequiresAdminAndMasks(t *testing.T) {
+	g, _, user := v1Gateway(t)
+	// Authenticate as the user key by swapping the shared helper's header.
+	req := newAuthedRequest(t, http.MethodGet, "/api/v1/keys", user)
+	rec := serveViaHandler(t, g, req)
+	if rec.Code != http.StatusForbidden {
+		t.Errorf("user role on /api/v1/keys = %d, want 403: %s", rec.Code, rec.Body.String())
+	}
+}
+
+func TestAPIV1SourcesNotFound(t *testing.T) {
+	g, _, _ := v1Gateway(t)
+	rec := doReq(t, g, http.MethodGet, "/api/v1/sources/nope", "")
+	if rec.Code != http.StatusNotFound {
+		t.Errorf("status = %d, want 404: %s", rec.Code, rec.Body.String())
+	}
+}
+
+func TestAPIV1RejectsWrites(t *testing.T) {
+	g, _, _ := v1Gateway(t)
+	for _, m := range []string{http.MethodPost, http.MethodPut, http.MethodDelete, http.MethodPatch} {
+		rec := doReq(t, g, m, "/api/v1/sources", `{}`)
+		if rec.Code == http.StatusOK {
+			t.Errorf("%s /api/v1/sources returned 200; the v1 read facade must not mutate", m)
+		}
+	}
+	// And the source must be untouched.
+	rec := doReq(t, g, http.MethodGet, "/api/v1/sources", "")
+	if !strings.Contains(rec.Body.String(), `"name":"up"`) {
+		t.Error("the source disappeared after a rejected write")
+	}
+}
+
+func TestAPIV1ModelsGroupsBySource(t *testing.T) {
+	g, _, _ := v1Gateway(t)
+	rec := doReq(t, g, http.MethodGet, "/api/v1/models", "")
+	if rec.Code != http.StatusOK {
+		t.Fatalf("status = %d", rec.Code)
+	}
+	var doc struct {
+		Count    int                 `json:"count"`
+		Models   []string            `json:"models"`
+		BySource map[string][]string `json:"by_source"`
+	}
+	decodeJSON(t, rec.Body.String(), &doc)
+	if doc.Count != 1 || doc.Models[0] != "m1" {
+		t.Errorf("models = %+v", doc.Models)
+	}
+	if len(doc.BySource["up"]) != 1 || doc.BySource["up"][0] != "m1" {
+		t.Errorf("by_source = %+v", doc.BySource)
+	}
+}
+
+func TestAPIV1RequiresAuthentication(t *testing.T) {
+	g, _, _ := v1Gateway(t)
+	for _, path := range []string{"/api/v1", "/api/v1/overview", "/api/v1/sources", "/api/v1/health", "/api/v1/models"} {
+		req := newRequest(http.MethodGet, path, "")
+		rec := serveViaHandler(t, g, req)
+		if rec.Code != http.StatusUnauthorized {
+			t.Errorf("%s without a key = %d, want 401", path, rec.Code)
+		}
+	}
+}
+
+func TestMaskKeyHidesTheSecret(t *testing.T) {
+	cases := map[string]string{
+		"":                   "",
+		"ab":                 "ab…",
+		"sk-gw-abcdefghijkl": "sk-gw-…ijkl",
+		"enc:v1:AAAA":        "(sealed)",
+	}
+	for in, want := range cases {
+		if got := maskKey(in); got != want {
+			t.Errorf("maskKey(%q) = %q, want %q", in, got, want)
+		}
+	}
+	// The masked form must not reveal the middle of the secret.
+	full := maskKey("sk-gw-1234567890abcdef")
+	if strings.Contains(full, "4567890abcdef") {
+		t.Errorf("maskKey leaked the middle: %q", full)
+	}
+}
+
+// newRequest builds an unauthenticated request.
+func newRequest(method, path, body string) *http.Request {
+	req, _ := http.NewRequest(method, path, strings.NewReader(body))
+	if body != "" {
+		req.Header.Set("Content-Type", "application/json")
+	}
+	return req
+}
+
+// newAuthedRequest builds a request carrying the given bearer key.
+func newAuthedRequest(t *testing.T, method, path, key string) *http.Request {
+	t.Helper()
+	req := newRequest(method, path, "")
+	req.Header.Set("Authorization", "Bearer "+key)
+	return req
+}
+
+// serveViaHandler pushes a request through the full handler chain (auth included).
+func serveViaHandler(t *testing.T, g *Gateway, req *http.Request) *httptest.ResponseRecorder {
+	t.Helper()
+	rec := httptest.NewRecorder()
+	g.Handler().ServeHTTP(rec, req)
+	return rec
+}

internal/gateway/server.go

@@ -222,6 +222,8 @@ func (g *Gateway) routes(w http.ResponseWriter, r *http.Request) {
 		g.handleModels(w, r)
 	case r.URL.Path == "/api/adapters" || strings.HasPrefix(r.URL.Path, "/api/adapters/"):
 		g.handleAdaptersAPI(w, r)
+	case r.URL.Path == "/api/v1" || strings.HasPrefix(r.URL.Path, "/api/v1/"):
+		g.apiV1Routes(w, r)
 	case r.URL.Path == "/api/sources" || strings.HasPrefix(r.URL.Path, "/api/sources/"):
 		g.handleSourcesAPI(w, r)
 	case r.URL.Path == "/api/source_templates" || strings.HasPrefix(r.URL.Path, "/api/source_templates/"):