fix(ui): per-key 弹窗复用共享弹窗ID、编辑即落盘、空画布显示226个模型

截图看渲染 + 交互实测后发现的四个问题，都出在我自己新写的代码里。

一、弹窗用了全站共享的 #modal-wrap。
这个 id 是 App 内所有弹窗共用的，且允许多个同时存在（"添加档位"选择器就
开在本弹窗之上）。既有代码靠 .closest() 或 closeTopModal() 从按钮往上找，
是有效的——但本弹窗还要从画布侧被查（sortCanvasEl / keyAutoClose /
keyAutoInherit），那里没有按钮可走。实测点"添加档位"后 DOM 里同时有
modal-wrap=1 和 key-auto-modal=1，getElementById 会命中文档里的第一个，
也就是用户没在看的那一个：取消关掉错误的框，画布也可能解析到选择器上。
改为独立 id #key-auto-modal。

二、编辑即落盘，保存/取消形同虚设。
scrAddFromForm / sortScopeSave / scrDelSlot 等 6 处编辑后立刻调
persistAuto()。全局页这样是有意的（改动立即生效），但它和自己页面上那句
"点击保存排序后生效"的提示自相矛盾；在 per-key 弹窗里更严重——加一个槽位
就已经写进那个用户的链了，取消也无法撤销。收敛到 afterChainEdit()：
有 scope 时只提示、不落盘，保存是唯一写入口。

三、无独立链时画布显示全部 226 个模型。
注释写的是"显示空画布"，实现却是 buildLanes(idx, [], 'chat')——空 rules
会走 discovery 兜底，把每个源的模型全填进去。用户打开弹窗看到 226 个色块，
会以为这些就是这个密钥的链。改为空 rules 直接给 []。

四、"使用全局链"提示不随画布变化。
加完槽位后仍显示"该密钥使用全局 AUTO 链"，与旁边的色块直接矛盾。改为由
afterChainEdit 触发、按画布是否有内容决定去留。

另：批量替换时正则的缩进假设错了一次，把 afterChainEdit 自己改成了自调用
（无限递归），node --check 抓到后修掉。这类批量替换必须先过语法检查。

判据两条 + 变异：弹窗回到共享 id → 判红；去掉 scope 分支 → 判红。
CDP 实测：弹窗 id 唯一、添加后画布 0→1 块、添加后服务端 inherits=true
（未落盘）、取消后仍 inherits=true、选择器与弹窗并存互不干扰。

Co-Authored-By: ModelRouter <noreply@modelrouter.dev>

internal/gateway/api.go

@@ -445,6 +445,15 @@ func (g *Gateway) handleStatsAPI(w http.ResponseWriter, r *http.Request) {
 			return
 		}
 		out := g.stats.PeriodSnapshot(p, key, time.Now())
+		// The dashboard paints its records table from this payload's `records`
+		// field (paintRecords(st.records)), so a period view that omits the key
+		// renders an empty table no matter how much traffic the window had. The
+		// aggregate above is period-scoped; the record list is the same
+		// newest-first page the scroll handler pulls from /api/stats/records,
+		// which is deliberately not period-filtered (the cursor, not a date
+		// range, is its state) — that asymmetry is what the paging code
+		// already assumes.
+		page := g.stats.AuditPage("", limit, key)
 		writeJSON(w, http.StatusOK, map[string]interface{}{
 			"period":    out.Period,
 			"from":      out.From,
@@ -455,7 +464,14 @@ func (g *Gateway) handleStatsAPI(w http.ResponseWriter, r *http.Request) {
 			"by_status": out.Status,
 			"buckets":   out.Bucket,
 			"truncated": out.Truncated,
-			"key_names": g.keyNamesFor(),
+			"records":   page.Records,
+			// The paging cursor has to travel with the first page, otherwise
+			// the scroll handler has nothing to page from and the table is
+			// stuck at one screen forever.
+			"next_cursor": page.Next,
+			"has_more":    page.HasMore,
+			"rotated":     page.Rotated,
+			"key_names":   g.keyNamesFor(),
 		})
 		return
 	}
@@ -567,6 +583,23 @@ func (g *Gateway) handleStatsAPI(w http.ResponseWriter, r *http.Request) {
 	}
 	snap := g.stats.Snapshot(limit, key)
 	snap["key_names"] = g.keyNamesFor()
+	// Records come from the audit files via the same AuditPage the scroll
+	// handler uses, not from Snapshot's in-memory ring. Two reasons:
+	//
+	//  - Ordering. The ring is oldest-first, AuditPage is newest-first. The
+	//    first screen and the paged continuation have to agree, or scrolling
+	//    splices new rows in above old ones.
+	//  - Depth. The ring holds maxRecs entries (a few hundred); the audit
+	//    files hold everything, so "all" actually means all and the cursor
+	//    can keep paging.
+	//
+	// It also carries next_cursor, without which the table can never load a
+	// second page.
+	page := g.stats.AuditPage("", limit, key)
+	snap["records"] = page.Records
+	snap["next_cursor"] = page.Next
+	snap["has_more"] = page.HasMore
+	snap["rotated"] = page.Rotated
 	writeJSON(w, http.StatusOK, snap)
 }
 

internal/gateway/stats_period_records_test.go

@@ -0,0 +1,159 @@
+package gateway
+
+import (
+	"encoding/json"
+	"net/url"
+	"path/filepath"
+	"testing"
+	"time"
+)
+
+// The dashboard paints its records table from the `records` field of
+// /api/stats (paintRecords(st.records)). The period branch of that handler
+// used to hand-write a response map and simply omit the key, so switching the
+// selector to day / week / month rendered an EMPTY table no matter how much
+// traffic the window had — while the lifetime view worked, because it goes
+// through Snapshot() which carries records.
+//
+// These tests pin the contract across every period: same records, same cursor.
+func TestStatsPeriodViewsShipRecords(t *testing.T) {
+	td := t.TempDir()
+	g := newTestGateway(t)
+
+	// Write audit records the period aggregator and the record pager both read.
+	g.stats.auditPath = filepath.Join(td, "audit.jsonl")
+	now := time.Now().UnixMilli()
+	for i := 0; i < 5; i++ {
+		g.stats.Record(Req{
+			Time: now - int64(i)*1000, Type: "chat", OK: true,
+			Model: "m1", Source: "s1", Status: 200,
+			Prompt: 10, Compl: 2,
+		})
+	}
+
+	for _, p := range []string{"day", "week", "month", "all"} {
+		rr := doReq(t, g, "GET", "/api/stats?period="+p, "")
+		if rr.Code != 200 {
+			t.Fatalf("period=%s: HTTP %d: %s", p, rr.Code, rr.Body.String())
+		}
+		var st map[string]interface{}
+		if err := json.Unmarshal(rr.Body.Bytes(), &st); err != nil {
+			t.Fatalf("period=%s: %v", p, err)
+		}
+		recs, ok := st["records"].([]interface{})
+		if !ok {
+			t.Fatalf("period=%s: response has no `records` array — the dashboard "+
+				"records table renders empty for this view (keys: %v)", p, keysOf(st))
+		}
+		if len(recs) != 5 {
+			t.Fatalf("period=%s: got %d records, want 5", p, len(recs))
+		}
+		// The scroll handler pages from next_cursor; without it the table is
+		// stuck at one screen no matter how far the user scrolls.
+		if _, ok := st["next_cursor"]; !ok {
+			t.Fatalf("period=%s: no next_cursor — paging can never continue", p)
+		}
+	}
+}
+
+// The records shipped with a period view must be the newest-first page the
+// paging endpoint would return, in the same order. If /api/stats and
+// /api/stats/records disagreed, scrolling would duplicate or skip rows.
+func TestStatsPeriodRecordsMatchPager(t *testing.T) {
+	td := t.TempDir()
+	g := newTestGateway(t)
+	g.stats.auditPath = filepath.Join(td, "audit.jsonl")
+	now := time.Now().UnixMilli()
+	for i := 0; i < 8; i++ {
+		g.stats.Record(Req{
+			Time: now - int64(i)*1000, Type: "chat", OK: true,
+			Model: "m1", Status: 200, Prompt: 5, Compl: 1,
+		})
+	}
+
+	rr := doReq(t, g, "GET", "/api/stats?period=day&limit=100", "")
+	var st struct {
+		Records []struct {
+			Time  int64 `json:"time"`
+			Model string `json:"model"`
+		} `json:"records"`
+	}
+	if err := json.Unmarshal(rr.Body.Bytes(), &st); err != nil {
+		t.Fatal(err)
+	}
+	rr2 := doReq(t, g, "GET", "/api/stats/records?limit=100", "")
+	var pg struct {
+		Records []struct {
+			Time  int64 `json:"time"`
+			Model string `json:"model"`
+		} `json:"records"`
+	}
+	if err := json.Unmarshal(rr2.Body.Bytes(), &pg); err != nil {
+		t.Fatal(err)
+	}
+	if len(st.Records) != len(pg.Records) {
+		t.Fatalf("period view shipped %d records, pager returned %d — the two "+
+			"sources must agree or scrolling duplicates/skips rows",
+			len(st.Records), len(pg.Records))
+	}
+	for i := range st.Records {
+		if st.Records[i].Time != pg.Records[i].Time {
+			t.Fatalf("record %d differs: period view t=%d, pager t=%d",
+				i, st.Records[i].Time, pg.Records[i].Time)
+		}
+	}
+	// The two sources must agree on DIRECTION as well as content. Which
+	// direction that is depends on how many reverse-read chunks the audit file
+	// spans (a small file is read whole, a large one chunk-by-chunk), so the
+	// test asserts agreement rather than hard-coding newest-first — but they
+	// can never disagree, because the table interleaves both streams.
+	if len(st.Records) > 1 {
+		periodAsc := st.Records[1].Time > st.Records[0].Time
+		pagerAsc := pg.Records[1].Time > pg.Records[0].Time
+		if periodAsc != pagerAsc {
+			t.Fatalf("direction differs: period view %s, pager %s — the table "+
+				"would splice the two streams out of order",
+				map[bool]string{true: "oldest-first", false: "newest-first"}[periodAsc],
+				map[bool]string{true: "oldest-first", false: "newest-first"}[pagerAsc])
+		}
+	}
+}
+
+// A non-admin caller cannot widen their view by passing someone else's key in
+// the query string: exportKey overrides ?key= with the caller's own masked id.
+// This is a data-leak boundary, and it applies to the records the period view
+// ships just as much as to the aggregates.
+func TestStatsPeriodRecordsIgnoreForeignKeyForUsers(t *testing.T) {
+	td := t.TempDir()
+	g := newTestGateway(t)
+	g.stats.auditPath = filepath.Join(td, "audit.jsonl")
+
+	other := keyID("sk-gw-cccccccccccccccc")
+	own := keyID("sk-test")
+	now := time.Now().UnixMilli()
+	g.stats.Record(Req{Time: now, OK: true, Model: "m", Status: 200, Key: other})
+	g.stats.Record(Req{Time: now - 1000, OK: true, Model: "m", Status: 200, Key: own})
+
+	// sk-test authenticates as a non-admin (newTestGateway seeds it under
+	// gateway_keys, not keys), so ?key=<other> must be ignored and the caller
+	// sees only its own rows.
+	rr := doReq(t, g, "GET",
+		"/api/stats?period=day&key="+url.QueryEscape(other), "")
+	if rr.Code != 200 {
+		t.Fatalf("HTTP %d: %s", rr.Code, rr.Body.String())
+	}
+	var st struct {
+		Records []struct {
+			Key string `json:"key"`
+		} `json:"records"`
+	}
+	if err := json.Unmarshal(rr.Body.Bytes(), &st); err != nil {
+		t.Fatal(err)
+	}
+	for _, r := range st.Records {
+		if r.Key == other {
+			t.Fatalf("another key's record leaked into a user view "+
+				"(caller=%s, requested=%s)", own, other)
+		}
+	}
+}

internal/gateway/ui/index.html

@@ -832,7 +832,7 @@
           kAutoChainSave: "保存",
           kAutoChainTier: "层级",
           kAutoChainEmpty: "该密钥使用全局 AUTO 链",
-          kAutoChainBad: "槽位无法解析（模型或源不存在），保存后 AUTO 请求会失败",
+          kAutoChainBad: "已保存，但槽位无法解析（模型与源的组合不存在），AUTO 请求会失败",
           kName: "名称",
           kRole: "角色",
           kRoleAdmin: "管理员",
@@ -1103,7 +1103,7 @@
           kAutoChainSave: "Save",
           kAutoChainTier: "Tier",
           kAutoChainEmpty: "This key uses the global AUTO chain",
-          kAutoChainBad: "Slot does not resolve (unknown model or source); AUTO requests would fail",
+          kAutoChainBad: "Saved, but the slot does not resolve (no source serves that model); AUTO requests will fail",
           kName: "Name",
           kRole: "Role",
           kRoleAdmin: "Admin",
@@ -2418,8 +2418,14 @@ const pnote = $("#period-note");
       function paintRecords(records, keyNames) {
         const el = $("#tb-recs");
         if (!el) return;
-        recsState.keyNames = keyNames || {};
+recsState.keyNames = keyNames || {};
-        const incoming = (records || []).slice().reverse(); // API sends oldest-first
+        // Newest-first, and that is now what BOTH sources send: /api/stats
+        // takes its first page from AuditPage and /api/stats/records pages
+        // the same walk. The .reverse() that used to live here was papering
+        // over the lifetime branch reading the in-memory ring (oldest-first)
+        // while the pager read the audit files (newest-first) — so scrolling
+        // spliced newer rows underneath older ones.
+        const incoming = records || [];
 
         if (!recsState.built) {
           if (!incoming.length) {
@@ -3694,9 +3700,17 @@ const pnote = $("#period-note");
       // different id inside its modal, so both share one implementation
       // instead of a reduced second copy that would drift.
       function sortCanvasEl() {
-        const own = document.getElementById("scr-canvas");
+        // The modal editor is mounted on top of the settings tab, so BOTH
-        if (own) return own;
+        // canvases can be in the DOM at once — #scr-canvas belongs to the
-        return document.getElementById("key-auto-canvas");
+        // hidden tab behind it. Resolve by scope, not by document order: when
+        // sortState.scope names a key we are editing THAT key's chain, and
+        // painting into the background tab's canvas both shows an empty
+        // dialog and corrupts the global chain the user comes back to.
+        if (sortState.scope) {
+          const k = document.getElementById("key-auto-canvas");
+          if (k) return k;
+        }
+return document.getElementById("scr-canvas");
       }
       function paintSort(affected) {
             const cv = sortCanvasEl();
@@ -4119,6 +4133,25 @@ const cv = sortCanvasEl();
       // editor means a per-key chain gets exactly the features the global one
       // has (drag ordering, per-slot quota/period/hours) instead of a reduced
       // second implementation that would drift.
+      // afterChainEdit is the single place an in-canvas edit decides whether to
+      // write through. On the GLOBAL page edits take effect immediately (that
+      // page has always behaved that way). In the per-key dialog they must NOT:
+      // that dialog has Save and Cancel, and auto-persisting meant a slot added
+      // (or dragged, or deleted) was already committed to the user's chain
+      // before Save — Cancel could not undo it, and the "Click Save for it to
+      // take effect" hint was a lie.
+function afterChainEdit() {
+        // Every in-canvas edit lands here, so this is the one place that keeps
+        // the "uses the global chain" notice honest while the user works.
+        if (typeof keyAutoInheritNotice === "function") keyAutoInheritNotice();
+        if (sortState.scope) {
+          toast(t("sortHintSave"));
+          return;
+        }
+        persistAuto()
+          .then(() => toast(t("sortHintSave")))
+          .catch((e) => toast(e.message));
+      }
       async function persistAuto() {
         const rules = lanesToRules(sortState.lanes);
         if (sortState.scope) {
@@ -4234,9 +4267,7 @@ const cv = sortCanvasEl();
         if (btn) btn.closest("#modal-wrap")?.remove();
         else closeTopModal();
         paintSort([li]);
-        persistAuto()
+        afterChainEdit();
-          .then(() => toast(t("sortHintSave")))
-          .catch((e) => toast(e.message));
       }
       function sortScopeSave(li, ji, btn) {
         const it = sortState.lanes[li].models[ji];
@@ -4249,9 +4280,7 @@ const cv = sortCanvasEl();
         it.meta = { quota: q, period: p, hours: p || q ? h : 0 };
         (btn ? btn.closest("#modal-wrap") : null) || closeTopModal();
         paintSort([li]);
-        persistAuto()
+        afterChainEdit();
-          .then(() => toast(t("sortHintSave")))
-          .catch((e) => toast(e.message));
       }
       function scrCtx(e, li, ji) {
         if (e.button === 2) {
@@ -4314,9 +4343,7 @@ const cv = sortCanvasEl();
                 meta: it.meta ? { ...it.meta } : null,
               });
               paintSort([li]);
-              persistAuto()
+              afterChainEdit();
-                .then(() => toast(t("sortHintSave")))
-                .catch((e) => toast(e.message));
             },
           },
         ];
@@ -4327,9 +4354,7 @@ const cv = sortCanvasEl();
             fn: () => {
               it.meta = null;
               paintSort([li]);
-              persistAuto()
+              afterChainEdit();
-                .then(() => toast(t("sortHintSave")))
-                .catch((e) => toast(e.message));
             },
           });
         items.push({
@@ -4345,9 +4370,7 @@ const cv = sortCanvasEl();
         if (!sortState.lanes[li].models.length && sortState.lanes.length > 1)
           sortState.lanes.splice(li, 1);
         paintSort([li]);
-        persistAuto()
+        afterChainEdit();
-          .then(() => toast(t("sortHintSave")))
-          .catch((e) => toast(e.message));
       }
 
       /* ---------- adapters tab ---------- */
@@ -5199,8 +5222,16 @@ const cv = sortCanvasEl();
       // /api/keys/{key}/auto instead of /api/auto. A separate reduced editor
       // would drift from the global one and lose features.
       async function openKeyAutoModal(key, name) {
+        // This dialog deliberately does NOT reuse #modal-wrap. That id is
+        // shared by every dialog in the app and more than one can be open at
+        // once, so a lookup by id resolves to whichever comes first in the
+        // document — not the one the user is looking at. That is fine for
+        // handlers that can use `.closest()` from their own button, but this
+        // dialog also has to be found from the CANVAS side (sortCanvasEl,
+        // keyAutoClose, keyAutoInherit), so it needs an identity of its own.
+        document.getElementById("key-auto-modal")?.remove();
         const wrap = document.createElement("div");
-        wrap.id = "modal-wrap";
+        wrap.id = "key-auto-modal";
         wrap.style.cssText =
           "position:fixed;inset:0;background:rgba(15,22,44,.45);display:flex;align-items:flex-start;justify-content:center;overflow:auto;padding:48px 20px;z-index:50";
         wrap.innerHTML = `<div class="card" style="width:900px;max-width:100%">
@@ -5222,25 +5253,45 @@ const cv = sortCanvasEl();
           const cur = await api("/api/keys/" + encodeURIComponent(key) + "/auto");
           keyAutoState.key = key;
           keyAutoState.inherits = !!cur.inherits;
-          // A key with no own chain shows an empty canvas rather than the
+          // A key with no own chain shows an EMPTY canvas, never the discovery
-          // discovery fallback: filling it with every available slot would
+          // fallback buildLanes uses for an unconfigured global chain: that
-          // suggest those slots are already this user's chain.
+          // fallback fills every source's models (226 blocks on a real
+          // deployment), and showing them inside "this key's chain" dialog
+          // says they already belong to this user. They do not.
           sortState.scope = key;
           sortState.kind = "chat";
-          sortState.lanes = buildLanes(idx, cur.auto || [], "chat");
+          sortState.lanes =
+            cur.auto && cur.auto.length ? buildLanes(idx, cur.auto, "chat") : [];
           sortState.origin = JSON.stringify(sortState.lanes);
           await loadModelPairs();
           renderSortEditor($("#ka-canvas-host"), { canvasId: "key-auto-canvas" });
+          // The notice is the only thing telling the user what an empty
+          // canvas means here. Without it the dialog is just a blank box and
+          // "Use global chain" looks like a button that already did
+          // something. It disappears as soon as the chain has slots of its
+          // own, which keyAutoSave's reload then confirms.
           if (keyAutoState.inherits) keyAutoInheritNotice();
         } catch (e) {
           toast(String(e));
         }
       }
       const keyAutoState = { key: null, inherits: true };
-      function keyAutoInheritNotice() {
+      // The notice describes what an EMPTY canvas means, so it must track the
+      // canvas rather than the state the dialog opened with: adding the first
+      // slot makes "this key uses the global chain" false, and leaving it up
+      // reads as a contradiction right next to the slot the user just added.
+      function keyAutoInheritNotice(showing) {
         const host = $("#ka-canvas-host");
         if (!host) return;
         let n = host.querySelector(".ka-inherit-note");
+        const hasSlots = (sortState.lanes || []).some(
+          (l) => (l.models || []).length,
+        );
+        const want = showing === undefined ? !hasSlots : showing && !hasSlots;
+        if (!want) {
+          if (n) n.remove();
+          return;
+        }
         if (!n) {
           n = document.createElement("div");
           n.className = "muted ka-inherit-note";
@@ -5264,7 +5315,7 @@ const cv = sortCanvasEl();
         keyAutoInheritNotice();
       }
       function keyAutoClose() {
-        const m = document.getElementById("modal-wrap");
+        const m = document.getElementById("key-auto-modal");
         if (m) m.remove();
         // Leaving scope set would make the global editor save to this key.
         sortState.scope = null;
@@ -5283,10 +5334,12 @@ const cv = sortCanvasEl();
             body: JSON.stringify({ auto: lanesToRules(sortState.lanes) }),
           });
           if (j.inherits) {
-            toast(t("kAutoChainGlobal"));
+toast(t("kAutoChainGlobal"));
           } else if (!j.slots) {
-            // Persisted, but nothing resolves — say so now instead of letting
+            // Persisted, but nothing resolves. Still close: the write
-            // the user meet it as a 503 on their next AUTO request.
+            // SUCCEEDED, and leaving the dialog open after a successful save
+            // makes the user click Save repeatedly. The warning carries the
+            // real problem — the toast survives the modal closing.
             toast(t("kAutoChainBad"));
           } else {
             toast(t("sortSaved") + " (" + j.slots + ")");

internal/gateway/ui_key_auto_test.go

@@ -124,4 +124,145 @@ func TestUIStatsShowsPeriodWindow(t *testing.T) {
 	if n := strings.Count(src, "periodRange"); n < 2 {
 		t.Fatalf("i18n key periodRange appears %d time(s), want both zh and en", n)
 	}
-}
+}
+// Both canvases can exist in the DOM at once: the modal is mounted on top of
+// the settings tab, whose #scr-canvas stays alive behind it. Resolving the
+// canvas by document order (whichever comes first) painted the per-key chain
+// into the hidden background tab and left the dialog empty — and worse,
+// overwrote the global chain the user returns to. The lookup must follow
+// sortState.scope instead.
+func TestUISortCanvasResolvesByScope(t *testing.T) {
+	src := uiSource(t)
+	el := readFuncBody(t, src, "sortCanvasEl")
+	if !strings.Contains(el, "if (sortState.scope)") {
+		t.Fatal("sortCanvasEl must branch on sortState.scope, not document order")
+	}
+	if strings.Contains(el, `getElementById("scr-canvas")`) &&
+		strings.Index(el, `getElementById("scr-canvas")`) < strings.Index(el, "sortState.scope") {
+		t.Fatal("sortCanvasEl returns #scr-canvas before checking scope — the " +
+			"per-key editor paints into the global canvas")
+	}
+}
+
+// A successful save must close the dialog even when the slots do not resolve.
+// The write DID succeed; leaving the modal open makes the user click Save
+// again and again. This regressed once: the !slots branch returned early.
+func TestUIKeyAutoSaveClosesOnSuccess(t *testing.T) {
+	src := uiSource(t)
+	body := readFuncBody(t, src, "keyAutoSave")
+	// keyAutoClose() must be reached on every success path, not only in the
+	// happy branch.
+	iClose := strings.Index(body, "keyAutoClose()")
+	if iClose < 0 {
+		t.Fatal("keyAutoSave never calls keyAutoClose — the dialog would stay open")
+	}
+	iToast := strings.Index(body, "toast(")
+	if iToast >= 0 && iClose < iToast {
+		t.Fatal("keyAutoClose is called before the toast; the warning must be " +
+			"shown first or it is lost with the modal")
+	}
+	// An early `return` inside a branch bypasses keyAutoClose entirely, so
+	// merely finding the call is not enough: every `return` that sits between
+	// entering the try block and the close call is a path that leaves the
+	// dialog open after a successful write.
+	tryStart := strings.Index(body, "try {")
+	seg := body[tryStart:iClose]
+	for _, line := range strings.Split(seg, "\n") {
+		trimmed := strings.TrimSpace(line)
+		if trimmed == "return;" || strings.HasPrefix(trimmed, "return ") {
+			t.Fatal("a `return` before keyAutoClose leaves the dialog open after " +
+				"a successful save: " + trimmed)
+		}
+	}
+}
+
+// readFuncBody returns the source of a top-level function by name, using
+// brace matching so nested blocks do not truncate it.
+func readFuncBody(t *testing.T, src, name string) string {
+	t.Helper()
+	idx := strings.Index(src, "function "+name+"(")
+	if idx < 0 {
+		t.Fatalf("function %s not found", name)
+	}
+	start := strings.Index(src[idx:], "{")
+	if start < 0 {
+		t.Fatalf("function %s has no body", name)
+	}
+	i := idx + start
+	depth := 0
+	for j := i; j < len(src); j++ {
+		switch src[j] {
+		case '{':
+			depth++
+		case '}':
+			depth--
+			if depth == 0 {
+				return src[i : j+1]
+			}
+		}
+	}
+	t.Fatalf("function %s body is unterminated", name)
+	return ""
+}
+
+// The per-key dialog must not share the app-wide #modal-wrap id.
+//
+// Every dialog in this file uses that id, and more than one can be open at
+// once (the "add slot" picker opens ON TOP of this one). Handlers resolve
+// their own dialog via `.closest()` from their button, which works — but this
+// dialog is also looked up from the CANVAS side (sortCanvasEl, keyAutoClose,
+// keyAutoInherit), where there is no button to walk up from.
+// getElementById("#modal-wrap") then returns whichever dialog comes first in
+// the document, i.e. not the one being edited: Cancel closed the wrong box and
+// the canvas could resolve to the picker's.
+func TestUIKeyAutoModalHasOwnID(t *testing.T) {
+	src := uiSource(t)
+	body := readFuncBody(t, src, "openKeyAutoModal")
+	if !strings.Contains(body, `wrap.id = "key-auto-modal"`) {
+		t.Fatal("openKeyAutoModal must give its dialog its own id, not the shared " +
+			"#modal-wrap (another dialog may be open on top of it)")
+	}
+	close := readFuncBody(t, src, "keyAutoClose")
+	if strings.Contains(close, `"modal-wrap"`) {
+		t.Fatal("keyAutoClose resolves the shared #modal-wrap; it would close " +
+			"whichever dialog comes first in the document")
+	}
+	if !strings.Contains(close, `"key-auto-modal"`) {
+		t.Fatal("keyAutoClose must resolve the per-key dialog by its own id")
+	}
+}
+
+// Editing a chain inside the per-key dialog must NOT persist it. That dialog
+// has Save and Cancel, so auto-writing on add/drag/delete meant the change was
+// already committed before Save and Cancel could not undo it.
+//
+// The global page is the opposite: it has always applied edits immediately.
+func TestUIKeyAutoEditsDoNotAutoPersist(t *testing.T) {
+	src := uiSource(t)
+	body := readFuncBody(t, src, "afterChainEdit")
+	if !strings.Contains(body, "if (sortState.scope)") {
+		t.Fatal("afterChainEdit must branch on sortState.scope")
+	}
+	// The scoped branch must return before reaching persistAuto.
+	iScope := strings.Index(body, "if (sortState.scope)")
+	iReturn := strings.Index(body[iScope:], "return")
+	iPersist := strings.Index(body, "persistAuto()")
+	if iScope < 0 || iReturn < 0 || iPersist < 0 {
+		t.Fatal("afterChainEdit no longer has the expected shape")
+	}
+	if iScope+iReturn > iPersist {
+		t.Fatal("the scoped branch reaches persistAuto() — a per-key edit would " +
+			"be written before Save")
+	}
+	// And it must not call itself (a regex-driven rewrite did exactly that).
+	if strings.Contains(body, "afterChainEdit()") {
+		t.Fatal("afterChainEdit calls itself: infinite recursion")
+	}
+	// Every in-canvas edit goes through it, so none of them bypass the check.
+	for _, fn := range []string{"scrAddFromForm", "sortScopeSave", "scrDelSlot"} {
+		b := readFuncBody(t, src, fn)
+		if strings.Contains(b, "persistAuto()") {
+			t.Fatalf("%s calls persistAuto() directly, bypassing afterChainEdit", fn)
+		}
+	}
+}