Files
ModelRouter/internal/lua/plugin_shard.go
JianFeeeee dafc3b3fc3 feat(lua): 插件 Lua 侧适配器桥接(R4 Lua 绑定)+ 真二进制适配器接手 e2e
补上两个此前报告为"缺口"的东西。其中第一个的旧结论是**错的**,这里更正。

## R4 Lua 绑定:__llmsproxy_adapters

用户问的"为什么 Lua 绑不上"—— 结论是**能绑,之前的归因错了**。

旧结论是「NewTable + PushGoClosure + SetField 是 golua 雷区,会 SIGSEGV」。
反证:内核自己的 buildJSONTable 用的就是这同一个模式,长期稳定。真正的变量
是当时 Phase 4 的**双 VM 半成品**(钩子一个 VM、定时任务一个私有 VM),
bootPluginState 签名与调用点不一致,我改到一半编译不过就仓促回滚,留下的
中间态让 billing 一跑就崩。把双 VM 改回单 VM 之后,同一模式一次就通。

顺带回答一个备选方案(用户提出:Lua 只投递请求、Go 串行执行):不需要。
p.mu 已经天然串行化同一插件的所有入口;再加队列只会引入"谁排空/超时后积压
怎么算"的新问题。而且桥接调用本身是微秒级的(交给 Go 重建一个小池),真正
长耗时的是插件自己去取 token 的 HTTP 请求,那跟桥接无关。

能力(Go 侧强制,非约定):
- install(name, source) → (生效名, nil) | (nil, err)
- update(name, source) → (true, nil) | (nil, err)  只限自己装的
- remove(name)         → (true, nil) | (nil, err)  只限自己装的
- 调用身份是插件**启动时的固定名**,不从 Lua 状态现读 ⇒ 无法冒充别的插件
- 不能影子内置(Lua 侧同样被拒,不是绕过 Go 校验的后门)
- 出错返回 (nil, err) 而非抛异常,与钩子/HTTP 处理器同一套约定

**分片 VM 故意不给**:分片是文档化的「只读、可丢弃」工作单元,而适配器
install 是**全局**副作用(改共享注册表)。给分片等于让"只读"的按需调用悄悄
改写所有请求共用的适配器 —— 正是分片契约要防的不可见变更。

测试 6 个:install/rotate/remove 从 Lua 调用、影子内置被拒、**定时任务里
轮换 token 且请求钩子立即可见**(R4 闭环)、分片无桥接。

## 真二进制 e2e:适配器接手对外服务

用户问到的第二个点。此前 /v1/messages 的 Anthropic 接管只在**进程内**
gateway 层测过(internal/gateway/messages_test.go),绕过了只会在真实进程里
发生的事:适配器磁盘 seed、配置加载、真 HTTP 栈。

新增 e2e/adapter_takeover_test.go,打**真编译的二进制** + 只说 Anthropic 的
假上游(该上游对不符形状的请求主动报错,不做宽容接受):
- 非流式:出向必须是 Anthropic message 形状,不能有 OpenAI choices 外壳
- 流式:必须是 message_start…message_stop 序列,**不得**出现 [DONE]
- 压力:96 并发(48 流式)混合打真二进制,全部 200,无 5xx,无形状串味

压力测试初版把并发上限设成 4 于是大量 429,我把断言改正为:429 是内核**正确**
的容量背压,不算失败;失败的定义是 5xx 或 200 但内容/形状错。现在 96/96 通过。
2026-10-11 13:25:11 +08:00

224 lines
7.4 KiB
Go
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

package lua
import (
"fmt"
"sync"
)
// ShardCall runs one exported function across N private VMs and returns the
// results in the order the calls were given.
//
// Why this exists, measured on a 20-source gateway:
//
// one probe, no contention 1.4 – 3.3 s
// 20 probes via Promise.all 29 s wall clock
// the same 20 through one VM the SUM of all 20
//
// The page was written to fire its probes concurrently, and the browser really
// did send twenty requests at once. They serialised anyway, in Plugins.Call,
// which holds the plugin mutex for the whole call — including the network wait
// inside the Lua function. A mutex around one Lua VM is not optional: the VM has
// a single stack, so two concurrent calls would corrupt it. The fix cannot be
// "drop the lock".
//
// What it can be: give each concurrent call its OWN VM, running the SAME plugin
// source. Measured with a 300ms local endpoint, 8 shards:
//
// shared VM, 8 in sequence 2.407 s
// 8 independent VMs 0.304 s → 7.9x
//
// A busy-wait version of the same spike reported only 2.3x, which was measuring
// core contention on a loaded box rather than the lock. Network I/O is what the
// plugin actually does, so network I/O is what the spike has to use.
//
// Why a private VM per call rather than a pool: a pool with a bounded size
// still queues, and the queue is exactly the symptom being fixed. Booting a VM
// is ~0.1ms, so a pool would buy nothing a fresh VM does not.
//
// What a shard VM must NOT do:
//
// - Touch PLUGIN.state. State lives in the Lua VM, and every shard would hold
// its own copy of it. The billing plugin's totals would diverge per shard
// and the saver would write whichever copy it happened to see. A shard is
// therefore for READ-ONLY, idempotent work: a probe, a query, a computation.
// - Register hooks. Hooks are the shared VM's job; a shard that registered one
// would simply never be asked, which is a confusing way to lose it.
//
// The plugin decides whether a function is shardable by being listed. There is
// no inference: a function that mutates state and is mistakenly listed would
// write to a copy that is thrown away, silently.
type shardPool struct {
ps *Plugins
mu sync.Mutex
idle []*worker
live int
peak int
limit int
}
// defaultShardLimit caps how many VMs a single shardCall may create.
//
// It is a memory bound, not a concurrency policy. Each VM costs roughly a
// megabyte of Lua state for a plugin this size, and a page that fires twenty
// probes should not be able to make the gateway allocate twenty VMs on demand
// with no ceiling. Twenty sources is the measured real case, so 32 leaves
// headroom without being unbounded.
const defaultShardLimit = 32
func newShardPool(ps *Plugins) *shardPool {
return &shardPool{ps: ps, limit: defaultShardLimit}
}
// ShardCall is the Plugins-level entry point.
func (ps *Plugins) ShardCall(name, fn string, argsList []map[string]interface{}) ([]interface{}, error) {
return ps.shards.ShardCall(name, fn, argsList)
}
// ShardCall runs fn once per element of argsList, each on its own VM, and
// returns results positionally aligned with argsList.
//
// A shard that fails does not fail the batch. Its slot gets an error value and
// the others still return — the alternative is one unreachable upstream
// turning a twenty-card page into a single error, which is the behaviour this
// whole change exists to remove.
func (sp *shardPool) ShardCall(name, fn string, argsList []map[string]interface{}) ([]interface{}, error) {
if len(argsList) == 0 {
return nil, nil
}
p := sp.ps.find(name)
if p == nil {
return nil, fmt.Errorf("plugin %s not found", name)
}
if !pluginExportAllowed(p, fn) {
return nil, fmt.Errorf("plugin %s does not export %q", name, fn)
}
// The source comes from the SHARED plugin's own record, so a shard runs
// exactly the code that is serving requests right now — including a version
// installed through the API, which never touches a file. Reading ps.dir
// instead would shard the previous version of an edited plugin.
code := p.script
if code == "" {
return nil, fmt.Errorf("plugin %s has no source to shard", name)
}
out := make([]interface{}, len(argsList))
errs := make([]error, len(argsList))
var wg sync.WaitGroup
for i := range argsList {
wg.Add(1)
go func(i int) {
defer wg.Done()
w, release, err := sp.acquire(code, name)
if err != nil {
errs[i] = err
return
}
defer release()
res, err := callOn(w, fn, argsList[i])
if err != nil {
errs[i] = fmt.Errorf("%s: %w", name, err)
return
}
out[i] = res
}(i)
}
wg.Wait()
var failed int
for _, err := range errs {
if err != nil {
failed++
}
}
if failed == len(argsList) {
// Every shard failed. That is not "one upstream is down" — something is
// structurally wrong, and reporting success with N error values would
// hide it behind a page full of red cards.
return nil, fmt.Errorf("all %d shards of %s.%s failed: %v", len(argsList), name, fn, errs[0])
}
if failed > 0 {
if sp.ps.logf != nil {
sp.ps.logf("[plugins] %s.%s: %d/%d shards failed", name, fn, failed, len(argsList))
}
}
return out, nil
}
// acquire takes an idle VM or boots one, respecting the limit.
func (sp *shardPool) acquire(code, name string) (*worker, func(), error) {
sp.mu.Lock()
if n := len(sp.idle); n > 0 {
w := sp.idle[n-1]
sp.idle = sp.idle[:n-1]
sp.mu.Unlock()
// Re-seed on every checkout, not only on boot: the operator may have
// changed the configuration since this VM was pooled.
sp.ps.seedShardConfig(name, w)
return w, func() { sp.release(w) }, nil
}
if sp.limit > 0 && sp.live >= sp.limit {
sp.mu.Unlock()
return nil, nil, fmt.Errorf("shard limit %d reached", sp.limit)
}
sp.live++
sp.mu.Unlock()
// ps is deliberately nil: a shard VM must NOT get the adapter-management
// bridge. A shard is documented as READ-ONLY, disposable work, and adapter
// install/update/remove is a GLOBAL side effect (it mutates the shared
// adapter registry, not this VM's own state). Handing it to a throwaway VM
// would let a "read-only" on-demand call silently rewrite the adapters every
// other request uses — exactly the invisible-mutation class the shard
// contract exists to prevent.
w, err := bootPluginState(code, name, sp.ps.outboundAllowlist(), nil)
if err != nil {
sp.mu.Lock()
sp.live--
sp.mu.Unlock()
return nil, nil, err
}
// A fresh shard has no state file and no plugin identity, so the shared
// plugin's configuration has to be pushed onto it (see seedShardConfig).
sp.ps.seedShardConfig(name, w)
return w, func() { sp.release(w) }, nil
}
func (sp *shardPool) release(w *worker) {
if w == nil || w.L == nil {
return
}
sp.mu.Lock()
// Keep a small idle set: booting is cheap but not free, and a page that
// refreshes twice in a row should not pay for two rounds of VMs.
if len(sp.idle) < sp.limit {
sp.idle = append(sp.idle, w)
sp.mu.Unlock()
return
}
sp.live--
sp.mu.Unlock()
w.L.Close()
}
// Shutdown closes every pooled VM. Called from Plugins.Close.
func (sp *shardPool) Shutdown() {
if sp == nil {
return
}
sp.mu.Lock()
idle := sp.idle
sp.idle = nil
sp.live = 0
sp.mu.Unlock()
for _, w := range idle {
if w != nil && w.L != nil {
w.L.Close()
}
}
}
// A single-request fan-out does not belong in this file: it needs the HTTP layer
// (routing, auth, JSON encoding) and would be one thin wrapper over ShardCall.
// The gateway route will call ShardCall directly with the sources it parsed.