mirror of
https://gitcode.com/JianFeeeee/ModelRouter.git
synced 2026-11-07 09:47:23 +00:00
5ab047e48b
用户报障：「除了 codebuddy，其他的登陆都不太正常，尤其是有道那个」。逐平台审计
参考实现（vendor/channel-pack/src）后发现根因不是 12 个独立 bug，而是几个系统性偏差。
## ① callback 流的回调是回环地址 → 必须走服务端浏览器（核心认识）
Trae/Gemini/有道 的 redirect_uri 都是回环地址（127.0.0.1 / localhost）。回环地址由
「打开授权页的那台机器」解析：远程用户在自己电脑上打开，重定向就落在**用户机器**上，
回调永远到不了网关。CodeBuddy 一直是好的，因为它走 state-poll，**根本不需要回调**。
→ 插件自起 loopback 接收器（Python，绑回环、双栈，路径按各平台注册值），
由服务端浏览器（VNC）承载授权页，重定向落回本机。
## ② 三个平台的回调路径各是注册值（写错就是 redirect_uri_mismatch）
有道 /auth/callback、Trae /authorize、Gemini /oauth-callback（参考 GEMINI_CALLBACK_PATH）
且 Gemini 的 redirect_uri 主机是 **localhost** 而不是 127.0.0.1。
另：Trae 的回调**不带 state**（token 直接放 query），其余平台必须带 → 校验规则按形态分。
## ③ 有道版本号不能写死
exchange/续期/签到的 version 是必填。实测 2026-10-13 上游已是 2026.9.23，而参考的兜底
常量还停在 2026.9.4。新增 lobsteraiClientVersion：远端为主（data.value.version，**非统一
信封**）+ 失败用兜底但**不缓存**（照参考 resolver）。失败时把上游 message 带出来
（实测形如 code=40102「无效或已过期的授权码」）。
## ④ Gemini token 交换缺 client_secret（症状正是「授权成功但账号不出现」）
参考注释点名：token 端点强制校验客户端身份，只发 client_id 会 invalid_request。
同时补 access_type=offline / prompt=consent（缺了拿不到 refresh_token），
并去掉误标的 pkce（上游 Cloud Code 用的是最朴素的 authorization_code + client_secret）。
## ⑤ Trae 授权 URL 少了 5 个必需参数
参考列为「一个都不能少」：login_trace_id（回调**反查 pending 的唯一凭据**）、
machine_id/device_id（hex32，每账号必须不同，否则被「该设备已签到」拦）、
x_device_id/x_machine_id。此前**完全没造**设备身份 → 登录页停在「授权中」。
## ⑥ Trae 签到头与设备身份
授权方案是 `Cloud-IDE-JWT`（不是 Bearer）；参考点明简化头**实测签到失败**，
需约 20 个客户端头，且 X-Device-Id 是**基于 user_id 确定性派生的 15 位数字**。
实现 seededStream（SHA256(utf8(salt:seed) ++ counterBE32) 串联）+ 三级派生，
并用参考实现（Node）生成期望值做**差分验证**逐字节对齐。
凭据改为 JSON 以保留 uid/device_id/machine_id（签到与轮换需要）。
## ⑦ 同段逻辑抽一个助手，防两条路漂移
lobsteraiExchange 被 oauth_callback 与 poll_login 两条路共用（原先各内联一份）。
## 判据（新增测试）
- TestLobsterLoopbackClosedLoop / TestLobsterExchangePreservesIdentity：loopback 闭环、
state 不匹配 400、重放 409、凭据含 uuid/first_keyfrom
- TestCallbackPlatformsLoopback：三个平台的路径与 state 规则、Trae 无 state 也能接住
- TestAuthorizeURLsHaveNoUnfilledPlaceholders：授权 URL 不留 {占位符}
- TestTraeDeriveMatchesReference：与参考实现**逐字节**差分（tools/trae_derive_expected.mjs）
- TestTraeCheckinHeaders：Cloud-IDE-JWT + 派生设备身份 + 客户端头齐全
- TestRemoteModelCatalogMergesWithFallback：远端为主、兜底补位、失败不清缓存
## 顺带
- set_endpoints 补 callback / client_version 键（否则测试无法把端点指到假上游）
- 删掉 spawnBrowser 里会把 redirect_uri 一律改写为插件挂载点的死代码（对有道致害）
- session 过期与插件卸载时回收 loopback 接收器进程（防进程泄漏）
- e2e/channels_flows_e2e_test.go：qoder 已从 manual 改为 device-poll，断言同步更新
5575 lines
264 KiB
Lua
5575 lines
264 KiB
Lua
-- channels：多平台账号接入（登录认证 → 凭据 → 自动领取额度 → 注册为上游源）
|
||
--
|
||
-- 为什么需要它
|
||
-- ------------
|
||
-- 网关的上游源(sources)一直是**运维手工配置**的：填 base_url、填 api_key。
|
||
-- 而现实里有大量平台是"注册个账号、每天领免费额度"的形态，它们的接入方式是
|
||
-- **登录**而不是"申请一个 key"。这类平台要接入网关，就需要：驱动登录 → 拿到
|
||
-- 凭据 → 定时领取额度 → 把端点当源用。
|
||
--
|
||
-- 本插件把这套流程做成通用的：一个插件内建平台表，每个平台声明自己的
|
||
-- 登录方式(link-poll / callback / paste)、额度领取接口、上游端点形状。
|
||
-- 新增一个平台是往 PLATFORMS 里加一条，不改内核。
|
||
--
|
||
-- 设计边界（与内核的约定）
|
||
-- ------------------------
|
||
-- 内核提供基础设施，插件自己不实现这些：
|
||
--
|
||
-- __llmsproxy_http 受出站白名单约束的 HTTP（登录/领额度都走它）
|
||
-- __llmsproxy_secrets 凭据保险库（0600、独立文件、跨插件不可读）
|
||
-- __llmsproxy_kernel 内核动作面（add_source / probe_all / reset_health…）
|
||
--
|
||
-- 本插件负责"平台知识"：每个平台的登录地址、额度接口、认证头形状、模型清单。
|
||
-- 平台知识放插件而不是内核，是因为它变化快、且属于"某个厂商的具体行为"——
|
||
-- 内核里出现厂商名就是分层被破坏了。登录会话、服务端浏览器栈也全归插件自持。
|
||
--
|
||
-- 权限（本插件需要，全部可在设置页看到"申请中"）
|
||
-- ------------------------------------------------
|
||
-- add_source 把平台端点注册为上游源
|
||
-- list_sources 显示当前已接入的平台
|
||
-- probe_all 接入后立刻验证可达
|
||
-- reset_health 上游恢复后清冷却
|
||
-- status 面板显示运行状态
|
||
--
|
||
-- 额外出站主机需批准（plugin.hosts）：登录页所在的域名不是上游源，默认会被
|
||
-- 出站白名单拒绝——这是刻意的，声明是请求、批准才是授权。
|
||
--
|
||
-- 登录会话归本插件自持（内核无"登录"概念）：会话表在 plugin.state.sessions，
|
||
-- 带 nonce 与过期时间；浏览器栈（Xvfb/chromium/x11vnc/websockify）由本插件用
|
||
-- os.execute 直接拉起并记录 pid，插件卸载/会话结束时自己回收。
|
||
-- 优先级阶梯（用户指定）：① 本机浏览器（给 URL）→ ② 自动化流程（轮询/回调）
|
||
-- → ③ VNC 无头浏览器兜底（无浏览器系统 / 自动化也无法完成的场景）。
|
||
|
||
local plugin = {
|
||
name = "channels",
|
||
version = "1.0.0",
|
||
description = "多平台账号接入：登录认证、凭据保管、自动领取额度、注册为上游源",
|
||
author = "llmsproxy",
|
||
}
|
||
|
||
-- 申请的内核权限。设置页会把"申请中但未授权"标红。
|
||
plugin.kernel = { "add_source", "list_sources", "probe_all", "reset_health", "status" }
|
||
|
||
-- WebUI 可调用的导出函数（POST /api/plugins/channels/call/{fn}）。
|
||
-- set_endpoints 让运维把渠道端点指向自建代理/镜像；测试用它打假上游。
|
||
plugin.exports = { "set_endpoints", "account_add", "account_list", "account_update", "account_delete", "account_test", "account_refresh", "account_reorder", "account_reset", "account_retest", "model_list", "model_refresh", "model_set_disabled", "model_set_disabled_many", "model_set_all_disabled", "model_clear_dead", "provider_status", "provider_set_enabled", "provider_get_order", "provider_set_order", "credits_claim_all", "credits_status", "credits_balances", "credits_permanent_lock", "backup_export", "backup_import", "backup_status", "auto_checkin", "gateway_get_enabled", "gateway_set_enabled", "usage_token_ledger", "usage_badge", "usage_badge_preference", "onboarding_status", "onboarding_claim", "__trae_derive_probe" }
|
||
|
||
|
||
|
||
-- ============================================================================
|
||
-- 平台表
|
||
-- ============================================================================
|
||
--
|
||
-- 每个平台声明登录方式与各端点。字段：
|
||
-- flow link-poll（给 URL 轮询）/ callback（OAuth 重定向回来带 code）/
|
||
-- device-poll（设备码：先申请码、给用户 URL、再轮询换 token）/
|
||
-- paste（用户粘贴 cookie/token）
|
||
-- login_url 用户要在自己浏览器打开的地址
|
||
-- base_url 接入网关后对话走的 OpenAI 兼容端点（adapter 决定协议形状）
|
||
-- adapter 内核适配器名（openai / anthropic / …）
|
||
-- models fallback 模型清单（登录后可用 refresh 动态拉取覆盖）
|
||
-- checkin 每日额度领取：{ url, method, body, auth }（可缺省=不支持签到）
|
||
--
|
||
-- 新增平台 = 加一条。不改内核，也不改本文件其它部分。
|
||
--
|
||
-- 注意：真实厂商端点逆向自参考实现（dsh-our-free-model/vendor/channel-pack）。
|
||
-- 仅在运维自己的网关、自己的账号范围内使用；法律风险运维自负（已确认）。
|
||
-- WASM 签名(Qoder)/captcha(ZCode)/扫码(Loomy,Raccoon) 这类无法在当前 Lua
|
||
-- 环境完成的流程标记 flow="manual"，登录时给出明确说明而非假装成功。
|
||
local PLATFORMS = {
|
||
-- ===== 真实厂商渠道（逆向自参考仓库，端点逐字照抄）=====
|
||
-- -- 这里**只放真实厂商**。测试夹具（example.com 的假平台、示范各种 flow 的
|
||
-- 注意：占位平台）绝不能内联到这里：本目录会被 UI / status / list_platforms 直接
|
||
-- 展示给运维，夹具写进来就是「生产 UI 里凭空多出 4 个假平台」。
|
||
-- 夹具由测试经 channels/inject_platforms 端点运行时注入。
|
||
|
||
-- TRAE（字节跳动）—— callback 登录 + ExchangeToken 续期 + 每日签到。
|
||
-- 这是最标准的一条，作为"同类厂商"的实现模板。
|
||
{
|
||
id = "trae",
|
||
name = "TRAE（字节）",
|
||
vendor = "bytedance",
|
||
flow = "callback",
|
||
-- 授权页（照参考 buildTraeLoginUrl 的完整参数集）。
|
||
-- 注意参数名必须是 **auth_callback_url**（参考注释点名：早期用了
|
||
-- redirect_uri/auth_callback 等错名，TRAE 拿不到回调地址、登录必然失败）。
|
||
-- 端口用 {port} 占位，实际拼装时填本机监听端口。
|
||
authorize = {
|
||
base = "https://www.trae.cn/authorization",
|
||
params = {
|
||
login_version = "1", auth_from = "solo", login_channel = "native_ide",
|
||
plugin_version = "2.3.62834", auth_type = "local",
|
||
client_id = "en1oxy7wnw8j9n", redirect = "0",
|
||
-- Trae 注册的回调路径是 /authorize（参考 trae-oauth.ts:565
|
||
-- `http://127.0.0.1:${port}/authorize`）—— 换成别的路径授权页会拒绝。
|
||
-- loopback 接收器会把它变成 http://127.0.0.1:{实际端口}/authorize。
|
||
auth_callback_url = "{redirect_uri}",
|
||
-- 设备身份与反查凭据：参考 trae-oauth.ts 列为「一个都不能少」——
|
||
-- login_trace_id 是回调**反查 pending** 的唯一凭据；machine_id/device_id
|
||
-- 缺席可能被风控拦；它们还会写进凭据供签到发 X-Device-Id（day 轮换躲 9074）。
|
||
login_trace_id = "{trace_id}",
|
||
machine_id = "{machine_id}", device_id = "{device_id}",
|
||
x_device_id = "{device_id}", x_machine_id = "{machine_id}",
|
||
x_device_brand = "PC", x_device_type = "PC", x_os_version = "1.0",
|
||
x_app_version = "0.1.52", x_app_type = "stable",
|
||
},
|
||
},
|
||
hosts = { "www.trae.cn", "api.trae.com.cn", "api.trae.cn", "trae-api-cn.mchost.guru" },
|
||
base_url = "https://trae-api-cn.mchost.guru",
|
||
adapter = "openai",
|
||
models = {
|
||
"DeepSeek-V4-Flash", "DeepSeek-V4-Pro", "kimi-k3", "kimi-k2.6",
|
||
"glm-5", "glm-5.2", "Doubao-Seed-2.1-Pro",
|
||
},
|
||
-- 每日签到：POST /trae/api/v2/ug/checkin_credits/claim body {} 到 UG 主机。
|
||
checkin = {
|
||
url = "https://api.trae.cn/trae/api/v2/ug/checkin_credits/claim",
|
||
method = "POST", body = "{}",
|
||
-- 授权方案是 Cloud-IDE-JWT（不是 Bearer），且参考注释点明：
|
||
-- 简化头实测签到失败，必须带基于 user_id 派生的设备身份头（见 traeCheckinHeaders）。
|
||
auth = "cloud-ide-jwt",
|
||
},
|
||
-- 签到状态（对齐参考：POST /checkin_credits/status → {checked_in, credits, enable}）
|
||
checkin_status = {
|
||
url = "https://api.trae.cn/trae/api/v2/ug/checkin_credits/status",
|
||
method = "POST", body = "{}",
|
||
status_fn = function(rec)
|
||
return {
|
||
active = rec.enable == true,
|
||
todayCheckedIn = rec.checked_in == true,
|
||
dailyCredit = tonumber(rec.credits) or 0,
|
||
}
|
||
end,
|
||
},
|
||
-- 余额（对齐参考：POST /trae/api/v2/pay/ide_user_ent_usage → remain = Σ(credits_limit - credits_amount)）
|
||
balance = {
|
||
url = "https://api.trae.cn/trae/api/v2/pay/ide_user_ent_usage",
|
||
method = "POST", body = '{"require_usage":true,"req_source":2}',
|
||
total_fn = function(rec)
|
||
local sum = 0
|
||
local list = rec.user_entitlement_pack_list or rec.userEntitlementPackList or {}
|
||
if type(list) ~= "table" then return 0 end
|
||
for _, p in ipairs(list) do
|
||
local lim = tonumber(p.credits_limit) or tonumber(p.creditsLimit) or 0
|
||
local amt = tonumber(p.credits_amount) or tonumber(p.creditsAmount) or 0
|
||
sum = sum + math.max(0, lim - amt)
|
||
end
|
||
return sum
|
||
end,
|
||
},
|
||
-- callback 解析模式（移植自参考 trae-oauth.ts parseTraeCallbackDetailed）：
|
||
-- trae token 直传：query 带 refreshToken / userJwt(JSON) / userInfo(JSON)。
|
||
-- refreshToken 存在时调 ExchangeToken 换新（轮换旧 refresh）；
|
||
-- 无 refreshToken 用 userJwt.Token 兑底；
|
||
-- 只有 code/authCodeInfo 时是 PKCE 流 → 明确报"暂不支持"而不是含糊失败。
|
||
callback = {
|
||
mode = "trae",
|
||
exchange_url = "https://api.trae.com.cn/cloudide/api/v3/trae/oauth/ExchangeToken",
|
||
exchange_body = '{"ClientID":"{client_id}","RefreshToken":"{refresh_token}","ClientSecret":"-","UserID":""}',
|
||
client_id = "", -- 参考用 product.clientId；TRAE 回调直传形态不强制，留空
|
||
},
|
||
},
|
||
|
||
-- MiniMax —— PKCE 设备码流（RFC 8628）。三步：申请码 → 用户授权 → 轮询换
|
||
-- token。全程纯 HTTP，无需本地服务器；user_code 显示给用户输到授权页。
|
||
{
|
||
id = "minimax",
|
||
name = "MiniMax",
|
||
vendor = "minimax",
|
||
flow = "device-poll",
|
||
device = {
|
||
-- 申请设备码：PKCE S256
|
||
code_url = "https://account.minimax.cn/oauth2/device/code",
|
||
code_body = "client_id=mcode-public&scope=agent.default&audience=agent-backend"
|
||
.. "&code_challenge={challenge}&code_challenge_method=S256",
|
||
-- 轮询换 token
|
||
token_url = "https://account.minimax.cn/oauth2/token",
|
||
token_body = "grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3Adevice_code"
|
||
.. "&device_code={device_code}&client_id=mcode-public&code_verifier={verifier}",
|
||
interval = 5, -- 轮询间隔秒
|
||
slow_down_guard = true, -- 响应 authorization_pending / slow_down 按标准处理
|
||
},
|
||
hosts = { "account.minimax.cn", "agent.minimax.cn" },
|
||
base_url = "https://agent.minimax.cn",
|
||
-- 远端模型目录（照参考 minimax-product.ts MINIMAX_MODELS_PATH）
|
||
models_remote = {
|
||
endpoints = { { url = "https://www.minimaxi.com/mavis/api/v1/models", method = "GET" } },
|
||
auth = "bearer",
|
||
parse = "id_list",
|
||
},
|
||
adapter = "openai",
|
||
models = { "MiniMax-M3.1-Flash-Preview", "MiniMax-M3", "MiniMax-M2.7-highspeed" },
|
||
-- 每日签到（两步：状态预检 + 领取；幂等靠服务端状态）
|
||
checkin = {
|
||
url = "https://agent.minimax.cn/minimax-cloud/api/v1/signin/claim",
|
||
method = "POST", body = "{}",
|
||
},
|
||
-- 签到状态预检（对齐参考 minimax-credits.ts，面板显示今日是否已签到）
|
||
checkin_status = {
|
||
url = "https://agent.minimax.cn/minimax-cloud/api/v1/signin/status",
|
||
method = "GET",
|
||
},
|
||
-- 余额（对齐参考：GET /credit/details，total = Σ details[].remaining_amount）
|
||
balance = {
|
||
url = "https://agent.minimax.cn/minimax-cloud/api/v1/credit/details",
|
||
method = "GET",
|
||
total_fn = function(rec)
|
||
-- 注意 total_count 是记录条数不是余额（参考注释踩过的坑）。余额=Σ remaining_amount。
|
||
if type(rec) ~= "table" or type(rec.details) ~= "table" then return 0 end
|
||
local sum = 0
|
||
for _, d in ipairs(rec.details) do
|
||
sum = sum + (tonumber(d.remaining_amount) or 0)
|
||
end
|
||
return sum
|
||
end,
|
||
},
|
||
},
|
||
|
||
-- Cline —— WorkOS 设备码流（照参考 cline-oauth.ts / cline-product.ts 逆向）。
|
||
-- 与 MiniMax 同为 device-poll，但判据形态完全不同（参考注释反复强调）：
|
||
-- 判据看响应体 error 字段（HTTP 可能非 2xx），不看 status 字段；
|
||
-- slow_down 累积退避 +1 秒（WorkOS 会持续限流不退避的客户端）；
|
||
-- 成功后还有第二步 register：拿 WorkOS token 换 Cline 自己的 token
|
||
-- （POST /api/v1/auth/register，body 驼峰 accessToken/refreshToken）。
|
||
{
|
||
id = "cline",
|
||
name = "Cline",
|
||
vendor = "cline",
|
||
flow = "device-poll",
|
||
device = {
|
||
code_url = "https://api.workos.com/user_management/authorize/device",
|
||
code_body = "client_id=client_01K3A541FN8TA3EPPHTD2325AR",
|
||
token_url = "https://api.workos.com/user_management/authenticate",
|
||
token_body = "grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3Adevice_code"
|
||
.. "&device_code={device_code}&client_id=client_01K3A541FN8TA3EPPHTD2325AR",
|
||
interval = 5,
|
||
-- WorkOS 形态：判 error 字段；slow_down 退避 1 秒；access_denied/invalid_grant 同组
|
||
judge = "workos",
|
||
slow_down_step = 1,
|
||
},
|
||
-- 第二步：WorkOS token → Cline token（挂 apiBase）
|
||
register = {
|
||
url = "https://api.cline.bot/api/v1/auth/register",
|
||
method = "POST",
|
||
body = '{"accessToken":"{access_token}","refreshToken":"{refresh_token}"}',
|
||
},
|
||
hosts = { "api.workos.com", "api.cline.bot", "app.cline.bot" },
|
||
base_url = "https://api.cline.bot",
|
||
-- 远端模型目录（照参考 cline-models.ts：**必须同时打两个端点**）。
|
||
-- 关键：/api/v1/models 的 460 个 id 里**没有** cline-free/*，免费模型只由
|
||
-- recommended-models 下发；只打前者会看不到任何免费模型。
|
||
models_remote = {
|
||
endpoints = {
|
||
{ url = "https://api.cline.bot/api/v1/ai/cline/recommended-models", method = "GET", url_auth = false },
|
||
{ url = "https://api.cline.bot/api/v1/models", method = "GET" },
|
||
},
|
||
auth = "bearer",
|
||
parse = "cline_merge",
|
||
},
|
||
adapter = "openai",
|
||
-- 免费模型（远端 free 数组实测，2026-10-05；内嵌目录只有这 3 个免费）
|
||
models = {
|
||
"stealth/space-bunny-alpha", "cline-free/mimo-v2.6-flash", "cline-free/muse-spark-1.3-contributor",
|
||
},
|
||
-- 参考 cline-credits.ts：sidecar 里扫不到 checkin/campaign 端点 —— 无每日领取。
|
||
-- 余额（对齐参考 cline-quota.ts：GET usage-limits，单位 dollars，show percentUsed）
|
||
credit_unit = "dollars",
|
||
balance = {
|
||
url = "https://api.cline.bot/api/v1/users/me/plan/usage-limits",
|
||
method = "GET",
|
||
total_fn = function(rec)
|
||
local d = rec.data or rec
|
||
local limits = d.limits or {}
|
||
if type(limits) ~= "table" then return 0 end
|
||
-- 取剩余百分比最小的那个限额的 (100-percentUsed)；没有就 0
|
||
local minRemain
|
||
for _, l in ipairs(limits) do
|
||
local used = tonumber(l.percentUsed or l.percent_used) or 0
|
||
local rem = 100 - used
|
||
if not minRemain or rem < minRemain then minRemain = rem end
|
||
end
|
||
return minRemain or 0
|
||
end,
|
||
},
|
||
},
|
||
|
||
-- Buddy（腾讯 CodeBuddy）—— state 轮询流（照参考 buddy-oauth.ts 逆向）。
|
||
-- 两步：POST /v2/plugin/auth/state → {state, authUrl}；用户在 authUrl 完成登录后
|
||
-- 插件轮询 GET /v2/plugin/auth/token?state=...。判据：业务码 11217 = 未就绪继续等；
|
||
-- 网络错误同样继续轮询不中断（对齐 Rust loop_get_token）。token 就绪后再拿账号。
|
||
{
|
||
id = "buddy",
|
||
name = "CodeBuddy（腾讯）",
|
||
vendor = "tencent",
|
||
flow = "state-poll",
|
||
state = {
|
||
state_url = "https://copilot.tencent.com/v2/plugin/auth/state?platform=ide",
|
||
token_url = "https://copilot.tencent.com/v2/plugin/auth/token",
|
||
account_url = "https://copilot.tencent.com/v2/plugin/login/account",
|
||
code_not_ready = 11217,
|
||
interval = 1,
|
||
},
|
||
hosts = { "copilot.tencent.com", "www.codebuddy.cn" },
|
||
base_url = "https://copilot.tencent.com",
|
||
-- 远端模型目录（照参考 buddy.ts CONFIG_PATH + buddy-oauth.ts fetchModels）。
|
||
-- 关键：必须带 product 身份头，否则 WorkBuddy 会以 CodeBuddy 身份请求。
|
||
models_remote = {
|
||
endpoints = { { url = "https://copilot.tencent.com/v3/config", method = "GET" } },
|
||
auth = "bearer",
|
||
headers_fn = true,
|
||
parse = "buddy_config",
|
||
},
|
||
adapter = "openai",
|
||
-- 计费/状态请求头：逐行移植参考 checkinHeaders（credits.ts）。
|
||
-- 实测只发 Authorization 会被上游 401：buddy 要求身份标识头齐全。
|
||
-- X-Domain 以产品配置为准（不用凭据里的 domain 快照，那是登录时的区域，
|
||
-- 跨产品迁移后会指错区）；X-Product 是部署类型（SaaS）；
|
||
-- X-Product-Code 是产品码（codebuddy）；X-User-Id 取凭据的 user_id。
|
||
headers_fn = function(accessToken, cred)
|
||
local h = {
|
||
["Authorization"] = "Bearer " .. accessToken,
|
||
["Accept"] = "application/json",
|
||
["Content-Type"] = "application/json",
|
||
["X-Domain"] = "copilot.tencent.com",
|
||
["X-Product"] = "SaaS",
|
||
["X-Product-Code"] = "codebuddy",
|
||
["User-Agent"] = "CodeBuddyIDE/1.106.1",
|
||
}
|
||
local uid = cred and (cred.user_id or cred.uid)
|
||
if type(uid) == "string" and uid ~= "" then h["X-User-Id"] = uid end
|
||
local eid = cred and cred.enterprise_id
|
||
if type(eid) == "string" and eid ~= "" then
|
||
h["X-Enterprise-Id"] = eid
|
||
h["X-Tenant-Id"] = eid
|
||
end
|
||
return h
|
||
end,
|
||
models = {
|
||
"deepseek-v4-flash", "deepseek-v4-pro", "hy4-preview", "hy4-preview-x",
|
||
"glm-5.3", "glm-5.3-flash", "glm-5.2",
|
||
},
|
||
-- 签到状态（对齐参考 credits.ts：必须用 checkin-activity-status，不能用
|
||
-- checkin-status —— 后者返回占位数据 active:false，是个坑）
|
||
checkin_status = {
|
||
url = "https://copilot.tencent.com/v2/billing/meter/checkin-activity-status",
|
||
method = "POST", body = "{}",
|
||
status_fn = function(rec)
|
||
local d = rec.data or rec
|
||
return {
|
||
active = d.active == true,
|
||
todayCheckedIn = d.todayCheckedIn == true or d.today_checked_in == true,
|
||
streakDays = tonumber(d.streakDays or d.streak_days) or 0,
|
||
todayCredit = tonumber(d.todayCredit or d.today_credit) or 0,
|
||
}
|
||
end,
|
||
},
|
||
-- 余额（对齐参考 USER_RESOURCE_PATH /v2/billing/meter/get-user-resource）
|
||
-- -- 注意响应是**双层嵌套** data.Response.Data.Accounts[]（与签到端点的单层
|
||
-- data 不同），这是本接口最容易解析错的地方。
|
||
-- -- 注意刻意**不用**服务端的 TotalDosage：它是**终身口径**且取整（实测同一
|
||
-- 响应里 TotalDosage=655 而 IDE 显示 155.67）。正确算法是遍历 Accounts[]
|
||
-- 现算：只累加**有效包**的 CycleCapacityRemain（失效包服务端仍会返回，
|
||
-- 但不能用于扣费，并进总额会让数字虚高），最后按两位小数规整。
|
||
balance = {
|
||
url = "https://copilot.tencent.com/v2/billing/meter/get-user-resource",
|
||
method = "POST", body = "{}",
|
||
total_fn = function(rec)
|
||
local data = rec.data
|
||
if type(data) ~= "table" then return nil end
|
||
local resp = data.Response
|
||
if type(resp) ~= "table" then return nil end
|
||
local inner = resp.Data
|
||
if type(inner) ~= "table" then return nil end
|
||
local accounts = inner.Accounts
|
||
if type(accounts) ~= "table" then return nil end
|
||
local now = os.time and os.time() or 0
|
||
local sum = 0
|
||
for _, pkg in ipairs(accounts) do
|
||
if type(pkg) == "table" then
|
||
-- 失效判定：Status 显式已过期，或 ExpiredTime / DeductionEndTime 已过。
|
||
local active = true
|
||
local st = pkg.Status
|
||
if st == 2 or st == "2" or st == "EXPIRED" or st == "expired" then active = false end
|
||
local function past(t)
|
||
if type(t) ~= "string" or t == "" then return false end
|
||
local Y, Mo, D, H, Mi, S = t:match("^(%d%d%d%d)%-(%d%d)%-(%d%d)[T ](%d%d):(%d%d):(%d%d)")
|
||
if Y then
|
||
local ts = os.time({ year = tonumber(Y), month = tonumber(Mo), day = tonumber(D),
|
||
hour = tonumber(H), min = tonumber(Mi), sec = tonumber(S), isdst = false })
|
||
return ts and now >= ts
|
||
end
|
||
return false
|
||
end
|
||
if past(pkg.ExpiredTime) then active = false end
|
||
local ded = tonumber(pkg.DeductionEndTime)
|
||
if ded and ded > 0 then
|
||
-- 毫秒时间戳
|
||
if now >= math.floor(ded / 1000) then active = false end
|
||
end
|
||
if active then
|
||
sum = sum + (tonumber(pkg.CycleCapacityRemain) or 0)
|
||
end
|
||
end
|
||
end
|
||
-- 两位小数规整（服务端精确值带浮点噪声，如 55.67000031）
|
||
return math.floor(sum * 100 + 0.5) / 100
|
||
end,
|
||
},
|
||
},
|
||
|
||
-- Gemini（Google Cloud Code）—— 标准 OAuth 授权码流 + token 交换。
|
||
-- 照参考 gemini-oauth.ts：授权页 client_id/redirect_uri/scope 齐全，回环回调
|
||
-- 拿到 code 后 POST oauth2.googleapis.com/token 换 token（带 code_verifier）。
|
||
-- client_id 是 Cloud Code 的公开客户端（逆向自 binary），scope 六项逐字照抄。
|
||
{
|
||
id = "gemini",
|
||
name = "Gemini（Cloud Code）",
|
||
vendor = "google",
|
||
flow = "callback",
|
||
login_url = "https://accounts.google.com/o/oauth2/v2/auth",
|
||
-- login_url 已含完整 OAuth 参数（client_id/scope/response_type），
|
||
-- 只剩 redirect_uri 与 state 需要按会话填 —— 用 authorize 规格声明，
|
||
-- 避免通用分支再追加一遍参数（造成 redirect_uri 出现两次）。
|
||
authorize = {
|
||
base = "https://accounts.google.com/o/oauth2/v2/auth",
|
||
params = {
|
||
client_id = "1071006060591-tmhssin2h21lcre235vtolojh4g403ep.apps.googleusercontent.com",
|
||
-- 回调路径必须是注册值 /oauth-callback（参考 GEMINI_CALLBACK_PATH），
|
||
-- 主机是 localhost 而非 127.0.0.1（参考注释明确）；路径/主机改一个就是
|
||
-- redirect_uri_mismatch。
|
||
redirect_uri = "http://localhost:{port}/oauth-callback",
|
||
response_type = "code",
|
||
-- 六项 scope 逐字照抄参考 GEMINI_SCOPES（cloud-platform 必需）
|
||
scope = "openid https://www.googleapis.com/auth/cloud-platform "
|
||
.. "https://www.googleapis.com/auth/userinfo.email "
|
||
.. "https://www.googleapis.com/auth/userinfo.profile "
|
||
.. "https://www.googleapis.com/auth/cclog "
|
||
.. "https://www.googleapis.com/auth/experimentsandconfigs",
|
||
-- 参考三个固定参数（缺 access_type=offline 拿不到 refresh_token）
|
||
access_type = "offline",
|
||
prompt = "consent",
|
||
include_granted_scopes = "true",
|
||
},
|
||
},
|
||
callback = {
|
||
mode = "code",
|
||
token_url = "https://oauth2.googleapis.com/token",
|
||
-- ⚠️ 必须带 client_secret：token 端点强制校验客户端身份，只发 client_id 会回
|
||
-- invalid_request: client_secret is missing，症状正是「浏览器显示授权成功，
|
||
-- 但面板里账号一直不出现」。redirect_uri 必须与授权时**完全一致**（含主机名）。
|
||
token_body = "grant_type=authorization_code&code={code}"
|
||
.. "&client_id=1071006060591-tmhssin2h21lcre235vtolojh4g403ep.apps.googleusercontent.com"
|
||
.. "&client_secret=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"
|
||
.. "&redirect_uri=http://localhost:{port}/oauth-callback",
|
||
-- 参考明言：上游 Cloud Code 用的是**最朴素的 authorization_code +
|
||
-- client_secret**，刻意不带 PKCE。
|
||
},
|
||
hosts = { "accounts.google.com", "oauth2.googleapis.com", "cloudcode-pa.googleapis.com" },
|
||
base_url = "https://cloudcode-pa.googleapis.com",
|
||
adapter = "gemini",
|
||
models = { "gemini-3.1-flash-lite-preview", "gemini-3.1-flash-preview" },
|
||
},
|
||
|
||
-- LobsterAI（有道龙虾）—— 本地回调 + authCode 换 token（照参考 lobsterai-oauth.ts）。
|
||
{
|
||
id = "lobsterai",
|
||
name = "LobsterAI（有道）",
|
||
vendor = "youdao",
|
||
flow = "callback",
|
||
-- 授权页真值：{portal}/portal#/login?source=electron&redirect_uri=<编码>&state=<state>
|
||
-- （参考 buildLobsteraiLoginUrl）。注意 login 在 **hash 段**，且三个参数都是
|
||
-- query —— 此前我写的 ".../login&redirect_uri=..." 既缺 /portal#、又把 & 当
|
||
-- 首个分隔符（应为 ?），授权页必然报参数错误。
|
||
-- 授权页真值（照参考 buildLobsteraiLoginUrl）：login 在 **hash 段**，
|
||
-- 三个 query 参数是 source/redirect_uri/state。
|
||
-- 此前我写的 ".../login&redirect_uri=..." 既缺 /portal#、又把 & 当首个
|
||
-- 分隔符（应为 ?），授权页必然报参数错误。
|
||
login_url = "https://lobsterai.youdao.com/portal#/login",
|
||
authorize = {
|
||
hash = "https://lobsterai.youdao.com/portal#/login",
|
||
params = {
|
||
source = "electron",
|
||
-- 参考注释：**必须**是 http://127.0.0.1:{port}/auth/callback 形态，
|
||
-- 登录页会校验。此处的 redirect_uri 由**本机 loopback 接收器**决定
|
||
-- （不是本插件的 /api/plugins/http 挂载点，也不是用户机器的 localhost），
|
||
-- 故用 {redirect_uri} 占位，拼装时由会话的实际接收器地址填入。
|
||
redirect_uri = "{redirect_uri}",
|
||
},
|
||
},
|
||
callback = {
|
||
mode = "code",
|
||
-- 参考真值 LOBSTERAI_EXCHANGE_PATH。此前写的 /api/auth/login 是我编的。
|
||
token_url = "https://lobsterai-server.youdao.com/api/auth/exchange",
|
||
-- 请求体必须含这 5 个字段（照参考 exchangeLobsteraiAuthCode）。
|
||
-- 兜底模板（正常路径走 lobsteraiExchange 助手，它会动态解析版本号）。
|
||
token_body = '{"authCode":"{code}","firstKeyfrom":"cli","latestKeyfrom":"{now}","uuid":"{uuid}","version":"2026.9.4"}',
|
||
},
|
||
-- 交换端点不需要 Authorization（此时还没有 token），但要这套匿名头。
|
||
callback_headers = {
|
||
["User-Agent"] = "LobsterAI/0.1.0",
|
||
},
|
||
hosts = { "lobsterai.youdao.com", "lobsterai-server.youdao.com",
|
||
"api-overmind.youdao.com" },
|
||
-- 客户端版本号：exchange 的 `version` 与签到 query 都必填。
|
||
-- **不能写死**：2026-10-13 实测该端点返回 2026.9.23，而参考的兜底常量
|
||
-- 还停在 2026.9.4 —— 写死就会发出一个过期的版本号。
|
||
-- 响应形态非统一信封：外层无 code，值在 data.value.version。
|
||
client_version = {
|
||
url = "https://api-overmind.youdao.com/openapi/get/luna/hardware/lobsterai/prod/update",
|
||
path = "data.value.version",
|
||
fallback = "2026.9.4",
|
||
},
|
||
base_url = "https://lobsterai-server.youdao.com",
|
||
-- 远端模型目录（照参考 lobsterai.ts LOBSTERAI_MODELS_PATH）
|
||
models_remote = {
|
||
-- 参考真值 LOBSTERAI_API_BASE（lobsterai-server.youdao.com）。
|
||
-- 此前写的 api.lobster.ai 是我编的（DNS 都不解析）。
|
||
endpoints = { { url = "https://lobsterai-server.youdao.com/api/models/available", method = "GET" } },
|
||
auth = "bearer",
|
||
parse = "id_list",
|
||
},
|
||
adapter = "openai",
|
||
models = { "kimi-k3", "glm-5.2", "deepseek-v4-flash" },
|
||
-- 余额（对齐参考：GET /api/user/profile-summary）
|
||
balance = {
|
||
url = "https://lobsterai-server.youdao.com/api/user/profile-summary",
|
||
method = "GET",
|
||
total_fn = function(rec)
|
||
local d = rec.data or rec
|
||
return tonumber(d.availableCredits or d.available_credits or d.credits or d.balance) or 0
|
||
end,
|
||
},
|
||
},
|
||
|
||
-- OpenCode —— 直接粘贴 API key（无登录流，参考 opencode-auth.ts）。
|
||
{
|
||
id = "opencode",
|
||
name = "OpenCode Zen",
|
||
vendor = "opencode",
|
||
flow = "paste",
|
||
base_url = "https://opencode.ai/zen",
|
||
-- 远端模型目录（照参考 opencode-product.ts modelsPath）
|
||
models_remote = {
|
||
endpoints = { { url = "https://opencode.ai/v1/models", method = "GET" } },
|
||
auth = "bearer",
|
||
parse = "id_list",
|
||
},
|
||
adapter = "openai",
|
||
models = { "big-pickle", "claude-sonnet-4-20250514", "gpt-5.1-codex-mini" },
|
||
},
|
||
|
||
-- CodeArts（华为）—— 凭据 + SDK-HMAC-SHA256 签到（照参考 codearts-credits.ts）。
|
||
-- 登录是常规企业凭据（paste）；签到走 snap-access 的 SDK-HMAC-SHA256 签名，
|
||
-- 放在 claim_fn 钩子里（checkin 表驱动驱动不动签名请求，参考注释也点明这一点）。
|
||
{
|
||
id = "codearts",
|
||
name = "CodeArts（华为）",
|
||
vendor = "huawei",
|
||
flow = "paste",
|
||
base_url = "https://snap-access.cn-north-4.myhuaweicloud.com",
|
||
adapter = "openai",
|
||
models = { "CodeArts-Pangu" },
|
||
checkin = {
|
||
url = "https://snap-access.cn-north-4.myhuaweicloud.com/snap-manager/v1/statistics/plugin",
|
||
method = "GET",
|
||
},
|
||
-- claim_fn 由下方 claimCodeArts 实现（引用前向声明，见文件末尾）
|
||
claim_fn_name = "claimCodeArts",
|
||
},
|
||
|
||
-- Qoder —— **标准 PKCE 设备码轮询**（照参考 qoder-oauth.ts / qoder.ts 逐行移植）。
|
||
-- -- 注意纠正一处长期错误：此前把 Qoder 标成 manual，理由是"登录要 WASM 签名头"。
|
||
-- 那是把**聊天加密**（WASM 用于 /algo/ 加密推理端点）与**登录**混为一谈 ——
|
||
-- 登录本身是纯 HTTP 的 PKCE 设备码流，Lua 完全能做：
|
||
-- ① 打开 {authBase}/device/selectAccounts?challenge&challenge_method=S256
|
||
-- &nonce&machine_id&client_id
|
||
-- ② 轮询 {openApiBase}/api/v1/deviceToken/poll?nonce&verifier&challenge_method=S256
|
||
-- 404 = 尚无会话（继续等）；2xx 无 token = 继续等；有 token 即完成
|
||
-- 三个必须照抄的细节（参考注释都点了名）：
|
||
-- · client_id 必须用 **prod 的**（非 prod 会让服务端在授权回调阶段拒绝）
|
||
-- · poll 挂在 openApiBase（openapi.qoder.sh），不是 authBase（那返回 401）
|
||
-- · nonce/verifier 必须原样回传（PKCE 校验）
|
||
{
|
||
id = "qoder",
|
||
name = "Qoder",
|
||
vendor = "qoder",
|
||
flow = "device-poll",
|
||
device = {
|
||
-- 授权页在 {authBase}/device/selectAccounts，query 由 pkce 表单拼装
|
||
code_url = "https://qoder.com/device/selectAccounts",
|
||
code_method = "GET_QUERY",
|
||
-- code_url 的 query 模板：{challenge}/{nonce}/{machine_id}/{client_id}
|
||
auth_query = "challenge={challenge}&challenge_method=S256&nonce={nonce}"
|
||
.. "&machine_id={machine_id}&client_id=" .. "e883ade2-e6e3-4d6d-adf7-f92ceff5fdcb",
|
||
-- 轮询在 openApiBase
|
||
token_url = "https://openapi.qoder.sh/api/v1/deviceToken/poll",
|
||
token_method = "GET_QUERY",
|
||
-- poll 的 query 模板：PKCE 用 verifier（不是 challenge）
|
||
poll_query = "nonce={nonce}&verifier={verifier}&challenge_method=S256",
|
||
-- 判据：404 = 继续（见 deviceOneStep 的 pending404 分支）
|
||
judge = "pending404",
|
||
interval = 2,
|
||
},
|
||
base_url = "https://api2-v2.qoder.sh",
|
||
adapter = "openai",
|
||
-- 兜底目录（照参考 QODER_FALLBACK_MODELS 的真实目录 key）。
|
||
-- 关键：这些是**上游目录 key**（如 qfmodel），不是通用名 —— 公开的
|
||
-- /model/v1/chat/completions 不认它们，必须走加密端点 agent_chat_generation。
|
||
-- 此前这里写的是 "qoder-default"（我编的占位名，上游不认，选了也调不通）。
|
||
-- 远端目录端点 /api/v2/model/list 需 WASM 签名，故参考自己也用兜底表。
|
||
models = {
|
||
"auto", "ultimate", "performance", "efficient", "smodel", "cmodel",
|
||
"qmodel_38max", "qfmodel", "qmodel_latest", "qmodel",
|
||
"kmodel_latest", "kmodel", "gmodel", "gfmodel",
|
||
"dmodel", "dfmodel", "mmodel",
|
||
},
|
||
-- 余额（对齐参考 qoder-credits.ts：GET /sash/api/v2/me/usage，余额=userQuota.remaining
|
||
-- + addOnQuota.remaining，走 openApiBase）
|
||
balance = {
|
||
url = "https://openapi.qoder.sh/sash/api/v2/me/usage",
|
||
method = "GET",
|
||
total_fn = function(rec)
|
||
local d = rec.data or rec
|
||
local u = (d.userQuota or {}).remaining or 0
|
||
local a = (d.addOnQuota or {}).remaining or 0
|
||
return (tonumber(u) or 0) + (tonumber(a) or 0)
|
||
end,
|
||
},
|
||
},
|
||
|
||
-- ZCode —— **两段式服务端中介授权流**（照参考 zcode-login.ts 逐行移植）。
|
||
-- -- 注意纠正第二处长期错误：此前标 manual，理由是"登录要解 captcha"。核对参考
|
||
-- 后发现**该授权流完全不涉及 captcha** —— captcha 属于另一条已废弃的旁路
|
||
-- （zcode-captcha.ts，用于读取本机官方客户端数据），而本流的注释明确写着
|
||
-- 「完全不经 zcode:// 自定义协议回调，故普通进程就能走完」：
|
||
-- ① POST {origin}/api/v1/oauth/cli/init
|
||
-- Authorization: Bearer <本地造的 flow_secret（32 字节 hex）>
|
||
-- body {provider:"bigmodel"}
|
||
-- → {flow_id, poll_token, authorize_url, expires_at, poll_interval_sec}
|
||
-- ② 用户在浏览器打开 authorize_url 完成授权
|
||
-- ③ GET {origin}/api/v1/oauth/cli/poll/{flow_id}
|
||
-- Authorization: Bearer <同一个 flow_secret>
|
||
-- → {status:"pending"} 继续 / {status:"ready", token, user, bigmodel|zai}
|
||
-- 判据（参考注释点名，与官方一致）：
|
||
-- · 4xx（**除 408/429**）才是终态失败；5xx 与网络错误继续重试
|
||
-- · code != 0 或 data 缺失 → pending
|
||
-- · token（zcode JWT）与 user.user_id 必需；第三方 token 取 bigmodel/zai 二者之一
|
||
{
|
||
id = "zcode",
|
||
name = "ZCode",
|
||
vendor = "zcode",
|
||
flow = "init-poll",
|
||
initpoll = {
|
||
init_url = "https://zcode.z.ai/api/v1/oauth/cli/init",
|
||
poll_url = "https://zcode.z.ai/api/v1/oauth/cli/poll/{flow_id}",
|
||
provider = "bigmodel",
|
||
app_version = "3.14.3",
|
||
origin = "https://zcode.z.ai",
|
||
interval = 2,
|
||
},
|
||
-- 推理走 Anthropic 协议的免费额度通道（照参考 zcode-upstream.ts）：
|
||
-- 积分制无论 bigmodel/zai 都走 zcode.z.ai（官方分派表规则 2/5，2026-10-03 实测）；
|
||
-- 只有订阅制才走 api.z.ai。这里用积分制那条。
|
||
base_url = "https://zcode.z.ai",
|
||
-- 远端模型目录（照参考 zcode-upstream.ts ZCODE_CLIENT_CONFIGS_URL）
|
||
models_remote = {
|
||
endpoints = { { url = "https://zcode.z.ai/api/v1/client/configs", method = "GET",
|
||
query = "app_version=1.0.0&platform=unknown" } },
|
||
auth = "none",
|
||
parse = "zcode_configs",
|
||
},
|
||
endpoint = "/api/v1/zcode-plan/anthropic/v1/messages",
|
||
adapter = "anthropic",
|
||
-- 余额端点（需要 Authorization；照参考 ZCODE_BILLING_BALANCE_URL）
|
||
balance = {
|
||
url = "https://zcode.z.ai/api/v1/zcode-plan/billing/balance",
|
||
method = "GET",
|
||
total_fn = function(rec)
|
||
local d = rec.data or rec
|
||
-- 优先取明确的余额字段；取不到就不编造（返回 nil 让调用方报错）
|
||
return tonumber(d.balance or d.remaining or d.credits or d.total)
|
||
end,
|
||
},
|
||
-- 兜底目录（照参考 ZCODE_FALLBACK_MODELS）。远端可拉：
|
||
-- GET /api/v1/client/configs?app_version=...&platform=unknown
|
||
-- 此前写的 "zcode-default" 是我编的占位名，上游不认。
|
||
models = { "GLM-5.3", "GLM-5.3-Flash" },
|
||
},
|
||
|
||
-- Loomy —— 微信扫码登录（照参考 loomy-oauth.ts 逆向）。
|
||
-- 扫码要在微信 App 里完成，纯 Lua 环境拿不到微信凭据，标 manual。
|
||
{
|
||
id = "loomy",
|
||
name = "Loomy",
|
||
vendor = "loomy",
|
||
-- 注意纠正第三处长期错误：此前标 manual，理由是"扫码在微信里完成，Lua 做不了"。
|
||
-- 扫码动作确实在用户手机上，但**协议全是纯 HTTP/Lua 可做**：
|
||
-- ① 取 uuid：GET open.weixin.qq.com/connect/qrconnect?...&state=... 从 HTML 抽 uuid
|
||
-- ② 二维码图：GET open.weixin.qq.com/connect/qrcode/{uuid}（JPEG，前端渲染）
|
||
-- ③ 长轮询：GET long.open.weixin.qq.com/connect/l/qrconnect?uuid&last&_
|
||
-- 响应体里 wx_errcode=NNN / wx_code='...'
|
||
-- ④ 拿 wx_code 后调讯飞账号端点换凭据（HMAC-SHA1 签名，见 loomyAuthHeaders）
|
||
-- 判据（参考点名；早期版本**读反了**导致"扫码后卡在已扫码"）：
|
||
-- 408=等待扫码；404=已扫码待确认（继续）；405=**已确认**（wx_code 在此帧）；
|
||
-- 403=用户取消；402=二维码失效
|
||
flow = "wechat-poll",
|
||
wechat = {
|
||
-- appid / redirect_uri 照参考常量（原写的 appid 是我编的，上游不认）；
|
||
-- 末尾 `#wechat_redirect` 是微信要求的固定片段，缺它对某些客户端会跳错页。
|
||
auth_url = "https://open.weixin.qq.com/connect/qrconnect"
|
||
.. "?appid=wx18d60be432287cf8&scope=snsapi_login&response_type=code"
|
||
.. "&redirect_uri=https%3A%2F%2Floomy.xunfei.cn%2Foauth%2Fwechat%2Fcallback"
|
||
.. "&state={state}#wechat_redirect",
|
||
qr_url = "https://open.weixin.qq.com/connect/qrcode/{uuid}",
|
||
poll_url = "https://long.open.weixin.qq.com/connect/l/qrconnect",
|
||
-- 逐字照参考 WECHAT_UA（微信对空 UA / 爬虫 UA 可能拒绝）
|
||
user_agent = "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36"
|
||
.. " (KHTML, like Gecko) Chrome/120.0.0.0 Safari/537.36",
|
||
-- 参考真值 LOOMY_ACCOUNT_BASE。此前写的 account.xfyun.cn 是我编的
|
||
-- （DNS 都不解析），实际账号域是 xfinfr.com —— 拼音近似导致的误写。
|
||
account_base = "https://account.xfinfr.com",
|
||
bind_path = "/login/thirdAccount/bind/auth",
|
||
access_key_id = "2thryby66wxi53sk",
|
||
access_key_secret = "zsak6eadrbawz683wf5r3m2snrwj868r",
|
||
app_id = "GM3LOOMY",
|
||
},
|
||
base_url = "https://loomy.xunfei.cn",
|
||
adapter = "openai",
|
||
-- 兜底目录（照参考 LOOMY_FALLBACK_MODELS）。此前 "loomy-default" 是我编的。
|
||
models = {
|
||
"deepseek-v4-flash-0731", "MiniMax-M3", "Kimi-k2.6", "qwen-3.8-max",
|
||
"GLM-5.3-Flash", "qwen3.8-flash", "spark-x", "mimo-v2.5",
|
||
},
|
||
},
|
||
|
||
-- Raccoon（商汤小浣熊）—— 扫码登录（照参考 raccoon-oauth.ts 逆向）。
|
||
-- 扫码是图片码，纯 Lua 环境无法展示与回取，标 manual。
|
||
{
|
||
id = "raccoon",
|
||
name = "Raccoon（商汤小浣熊）",
|
||
vendor = "sensetime",
|
||
-- 注意纠正第四处：此前标 manual，说"要扫码，做不了"。**扫码路径纯 HTTP 可做**：
|
||
-- ① 本地造 qrcode_code（16 字节随机 hex）
|
||
-- ② 二维码 URL {apiBase}/login/mp?code=...&appname=商汤小浣熊官网（前端渲染）
|
||
-- ③ 轮询 POST {apiBase}/api/web/auth/v1/login_with_qrcode_code {qrcode_code}
|
||
-- → data.status ∈ pending/logging/canceled/success；success 带 token
|
||
-- 参考注释：code 由**宿主侧本地随机生成**（服务端接受任意自造 code 并进入
|
||
-- pending），故完全绕开收不到的自定义协议回调。
|
||
-- 短信路径（/sms/send + /sms/verify）需要阿里云滑块 captcha_param 与手机号
|
||
-- AES 加密 —— 那一条才真需要人工，故不走。
|
||
flow = "qr-poll",
|
||
qr = {
|
||
api_base = "https://xiaohuanxiong.com",
|
||
auth_prefix = "/api/web/auth/v1",
|
||
poll_path = "/login_with_qrcode_code",
|
||
login_page = "/login/mp",
|
||
app_name = "商汤小浣熊官网",
|
||
interval = 2,
|
||
},
|
||
-- 推理是标准 OpenAI 兼容（实测 POST /api/web/llm/v2/chat/completions）
|
||
base_url = "https://xiaohuanxiong.com/api/web/llm/v2",
|
||
adapter = "openai",
|
||
-- 兜底目录（照参考 RACCOON_FALLBACK_MODELS）。此前 "raccoon-default" 是我编的。
|
||
-- 注意 sn- 前缀是本平台的真实命名约定（sensenova 系列）。
|
||
models = {
|
||
"sn-sensenova-6-8-flash", "sn-sensenova-6-8-flash-lite",
|
||
"sn-glm-5-3", "sn-kimi-k3", "sn-glm-5-3-flash",
|
||
"sn-deepseek-v4-1-flash",
|
||
},
|
||
-- 余额（照参考：GET {apiBase}/api/web/points/v1/balance）
|
||
balance = {
|
||
url = "https://xiaohuanxiong.com/api/web/points/v1/balance",
|
||
method = "GET",
|
||
headers_fn = function(accessToken, cred)
|
||
return {
|
||
["Authorization"] = "Bearer " .. accessToken,
|
||
["Accept"] = "application/json",
|
||
["Content-Type"] = "application/json",
|
||
["X-Org-Code"] = (cred and cred.office_identity) or "",
|
||
["X-Raccoon-Language"] = "zh",
|
||
}
|
||
end,
|
||
total_fn = function(rec)
|
||
local d = rec.data or rec
|
||
return tonumber(d.available_points or d.availablePoints or d.points)
|
||
end,
|
||
},
|
||
-- 一次性新人奖励（对齐参考 RACCOON_LOGIN_REWARD_POINTS）
|
||
onboarding = { reward_points = 3000 },
|
||
},
|
||
}
|
||
|
||
-- CodeArts 的 SDK-HMAC-SHA256 签到钩子（照参考 codearts-credits.ts 逆向）。
|
||
-- 绑在 PLATFORMS 表定义之后：claim_daily 读取 plat.claim_fn，checkin 表驱动
|
||
-- 不动签名请求（参考注释也点明这一点），所以用钩子生成签名后的请求形状。
|
||
do
|
||
local ca
|
||
for _, p in ipairs(PLATFORMS) do
|
||
if p.id == "codearts" then ca = p break end
|
||
end
|
||
if ca then
|
||
-- SDK-HMAC-SHA256 派生签名密钥链（照参考 canonical request 形状）。
|
||
ca.claim_fn = function(plat, tok, args)
|
||
local url = plat.checkin.url
|
||
local method = plat.checkin.method or "GET"
|
||
local host = url:match("^https?://([^/:]+)")
|
||
local path = url:match("^https?://[^/]+(/[^?]*)")
|
||
local ts = tostring(os.time and os.time() or 0)
|
||
local nonce = tostring(math.random(1e12))
|
||
local canonical = method .. "\n" .. (path or "/") .. "\n" .. ts .. "\n" .. nonce
|
||
local secret = tok or ""
|
||
local kDate = hmac_sha256_hex("SDK" .. secret, ts)
|
||
local kNonce = hmac_sha256_hex(kDate, nonce)
|
||
local kSigning = hmac_sha256_hex(kNonce, "sdk_request")
|
||
local signature = hmac_sha256_hex(kSigning, canonical)
|
||
return {
|
||
url = url,
|
||
method = method,
|
||
headers = {
|
||
["Host"] = host,
|
||
["X-Sdk-Date"] = ts,
|
||
["Authorization"] = "SDK-HMAC-SHA256 Credential="
|
||
.. (args and args.access_key or "") .. "/" .. ts .. "/" .. nonce
|
||
.. "/sdk_request, SignedHeaders=host, Signature=" .. signature,
|
||
},
|
||
}
|
||
end
|
||
end
|
||
end
|
||
|
||
-- 申请的额外出站主机：从平台声明推导（登录域 + 上游域），避免两份清单漂移。
|
||
-- 内核里**不含**任何厂商名 —— 这些只存在于本插件，且需运维在设置页逐个批准。
|
||
local function declaredHosts()
|
||
local seen, out = {}, {}
|
||
for _, p in ipairs(PLATFORMS) do
|
||
for _, h in ipairs(p.hosts or {}) do
|
||
local hn = h:lower()
|
||
if not seen[hn] then seen[hn] = true out[#out+1] = hn end
|
||
end
|
||
end
|
||
-- 上游 base_url 的 host 也要（发对话/签到用）
|
||
for _, p in ipairs(PLATFORMS) do
|
||
local h = (p.base_url or ""):match("^https?://([^/:]+)")
|
||
if h and not seen[h:lower()] then seen[h:lower()] = true out[#out+1] = h:lower() end
|
||
end
|
||
for _, p in ipairs(PLATFORMS) do
|
||
local h = (p.checkin and p.checkin.url or ""):match("^https?://([^/:]+)")
|
||
if h and not seen[h:lower()] then seen[h:lower()] = true out[#out+1] = h:lower() end
|
||
end
|
||
-- 各 flow 自己的端点域名也要（否则授权页/长轮询/账号端点会被出站白名单拦）。
|
||
-- 这些域名与 base_url 往往不同：Loomy 的授权在 open.weixin.qq.com、
|
||
-- 长轮询在 long.open.weixin.qq.com、账号在 account.xfyun.cn；
|
||
-- ZCode 的 init/poll 在 zcode.z.ai（与 base_url 同域但显式声明更清楚）。
|
||
local function addHost(u)
|
||
local h = (u or ""):match("^https?://([^/:]+)")
|
||
if h and not seen[h:lower()] then seen[h:lower()] = true out[#out+1] = h:lower() end
|
||
end
|
||
for _, p in ipairs(PLATFORMS) do
|
||
if p.wechat then
|
||
addHost(p.wechat.auth_url); addHost(p.wechat.qr_url)
|
||
addHost(p.wechat.poll_url); addHost(p.wechat.account_base)
|
||
end
|
||
if p.initpoll then addHost(p.initpoll.init_url); addHost(p.initpoll.poll_url) end
|
||
if p.qr then addHost(p.qr.api_base) end
|
||
if p.device then addHost(p.device.code_url); addHost(p.device.token_url) end
|
||
if p.state then addHost(p.state.state_url); addHost(p.state.token_url); addHost(p.state.account_url) end
|
||
if p.models_remote then
|
||
for _, m in ipairs(p.models_remote.endpoints or {}) do addHost(m.url) end
|
||
end
|
||
if p.balance then addHost(p.balance.url) end
|
||
if p.checkin_status then addHost(p.checkin_status.url) end
|
||
if p.callback then addHost(p.callback.exchange_url) end
|
||
end
|
||
table.sort(out)
|
||
return out
|
||
end
|
||
plugin.hosts = declaredHosts()
|
||
|
||
-- bodyOf 把 handler 的 req.body（**JSON 字符串**）解成 table。
|
||
--
|
||
-- 为什么需要它：handler 收到的是原始 body 字符串，不是解码后的表（内核不猜
|
||
-- 插件的载荷形状）。载荷坏掉时返回空表而不是报错 —— 调用方随后会因为缺少
|
||
-- 必要字段而得到明确的错误，比一个 JSON 解析异常更好读。
|
||
local function bodyOf(req)
|
||
if not req or not req.body or req.body == "" then return {} end
|
||
if type(req.body) == "table" then return req.body end
|
||
local ok, v = pcall(json.decode, req.body)
|
||
if not ok or type(v) ~= "table" then return {} end
|
||
return v
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- device-poll 通用执行器（移植自参考实现 minimax-oauth.ts / cline-oauth.ts）
|
||
-- ============================================================================
|
||
-- 行为逐字对齐参考实现，测试用例也照它搬（见 channels_device_test.go）：
|
||
--
|
||
-- 1. PKCE S256：verifier = 随机字节 base64url；challenge = SHA256(verifier)
|
||
-- 的 base64url（参考 createMinimaxPkce）。
|
||
-- 2. 轮询决策分支的**顺序**就是行为（参考 pollMinimaxDeviceToken）：
|
||
-- HTTP 200 + status=pending → 继续等
|
||
-- HTTP 200 + status=slow_down → interval += 5s，继续等
|
||
-- HTTP 200 + status=denied /
|
||
-- access_denied → 会话 failed（用户拒绝）
|
||
-- HTTP 200 + status=expired /
|
||
-- expired_token → 会话 failed（码过期）
|
||
-- 非 200 + error=authorization_pending → 继续等（OAuth 标准形态）
|
||
-- 非 200 + error=slow_down → interval += 5s，继续等
|
||
-- HTTP 200（无上述状态） → 成功，提取 access_token
|
||
-- 其它 → 会话 failed（带 error 文本）
|
||
-- 注意「两种还在等」都要认：形一是 200+status 字段，形二是非 200+error 字段。
|
||
-- 3. 轮询由页面驱动（poll_login 每次调用推进一步），不在 Lua 里阻塞循环：
|
||
-- 插件单 VM 单锁，阻塞循环会卡住本插件的全部钩子。
|
||
|
||
-- b64url：内核的 base64_encode 是标准 base64；PKCE 要 base64url（无 +/= ）。
|
||
local function b64url(s)
|
||
return (base64_encode(s):gsub("+", "-"):gsub("/", "_"):gsub("=+$", ""))
|
||
end
|
||
|
||
-- hexToBin：把 hex 字符串还原成二进制字符串（PKCE challenge 输入用）。
|
||
local function hexToBin(h)
|
||
return (h:gsub("..", function(cc) return string.char(tonumber(cc, 16)) end))
|
||
end
|
||
|
||
-- ---- 讯飞账号（CAccount）HMAC-SHA1 签名（Loomy 用）----
|
||
-- 逐段复刻参考 loomy-sign.ts。任何偏差都会让账号端点返回鉴权失败。
|
||
--
|
||
-- 内核只有 sha256/hmac_sha256 —— 没有 sha1，也没有 md5。但插件有完整 OS 能力，
|
||
-- 直接用 openssl（本机已装）算 HMAC-SHA1 与 MD5，不在 Lua 里重写密码学原语。
|
||
--
|
||
-- 签名字符串 9 段以 \n 连接，**后两段恒为空串**（不发 x-* 头），
|
||
-- 故最终字符串以两个换行结尾 —— 不要"顺手"去掉尾随换行。
|
||
-- 认证头前缀是 `account {ak}:{sig}`（**不是** Bearer）。
|
||
|
||
-- rfc3986Escape：encodeURIComponent 等价 + 补转 ! ' ( ) *
|
||
local function rfc3986Escape(v)
|
||
v = tostring(v or "")
|
||
v = v:gsub("([^A-Za-z0-9%-%._~])", function(c)
|
||
return string.format("%%%02X", string.byte(c))
|
||
end)
|
||
-- encodeURIComponent 不转 ! ' ( ) * ~，但参考的 escapeRfc3986 要转前五个
|
||
v = v:gsub("!", "%%21"):gsub("'", "%%27"):gsub("%(", "%%28")
|
||
:gsub("%)", "%%29"):gsub("%*", "%%2A")
|
||
return v
|
||
end
|
||
|
||
-- opensslDigest：调 openssl 算摘要。mode 是 openssl 的算法名（md5/sha1）。
|
||
-- hmacKey 非空时用 -hmac；输出 base64（参考用的就是 base64）。
|
||
local function opensslDigest(mode, data, hmacKey)
|
||
-- 用临时文件传原文：命令行的引号/换行/二进制都不可靠
|
||
local inPath = "/tmp/llmsproxy-sig-in-" .. tostring(math.random(1e12))
|
||
local f = io.open(inPath, "wb")
|
||
if not f then return nil, "无法写临时文件" end
|
||
f:write(data)
|
||
f:close()
|
||
local cmd
|
||
if hmacKey and hmacKey ~= "" then
|
||
local keyPath = inPath .. ".key"
|
||
local kf = io.open(keyPath, "wb")
|
||
if not kf then os.remove(inPath) return nil, "无法写密钥文件" end
|
||
kf:write(hmacKey)
|
||
kf:close()
|
||
-- 外层用单引号包 Lua 字符串，内部才能安全地带 shell 的双引号
|
||
cmd = ('openssl dgst -%s -hmac "$(cat %s)" -binary %s 2>/dev/null | base64 -w0')
|
||
:format(mode, keyPath, inPath)
|
||
local h = io.popen(cmd)
|
||
local out = h and h:read("*a") or ""
|
||
if h then h:close() end
|
||
os.remove(keyPath)
|
||
os.remove(inPath)
|
||
return (out ~= "" and (out:gsub("%s+$", ""))) or nil
|
||
end
|
||
cmd = ("openssl dgst -%s -binary %s 2>/dev/null | base64 -w0"):format(mode, inPath)
|
||
local h = io.popen(cmd)
|
||
local out = h and h:read("*a") or ""
|
||
if h then h:close() end
|
||
os.remove(inPath)
|
||
return (out ~= "" and (out:gsub("%s+$", ""))) or nil
|
||
end
|
||
|
||
-- loomyContentMd5：空 body 返回**空串**（不是空串的 md5），与客户端一致。
|
||
local function loomyContentMd5(body)
|
||
if not body or body == "" then return "" end
|
||
return opensslDigest("md5", body, nil) or ""
|
||
end
|
||
|
||
-- loomySigningString：9 段拼串（method,path,query,md5,ctype,date,nonce,"",""）
|
||
local function loomySigningString(method, path, query, body, contentType, date, nonce)
|
||
local md5 = loomyContentMd5(body)
|
||
return table.concat({
|
||
method:upper(), path, query or "", md5, contentType or "",
|
||
date, nonce, "", "",
|
||
}, "\n")
|
||
end
|
||
|
||
-- loomyAuthHeaders：生成讯飞账号请求头。
|
||
local function loomyAuthHeaders(ak, aks, method, path, body, contentType)
|
||
local date = os.date("!%a, %d %b %Y %H:%M:%S GMT")
|
||
-- nonce 只要唯一即可（服务端不校验格式）。这里**不能调 newToken** ——
|
||
-- 它定义在文件后段（1518 行），Lua 词法作用域下此处是 nil，调用会崩。
|
||
-- 用内核全局 sha256_hex（随时可用）造一个 32 字节 hex，与参考的 UUID 同量级。
|
||
local nonce = string.format("%s-%s-%s",
|
||
sha256_hex(tostring(os.time()) .. tostring(math.random(1e12))):sub(1, 8),
|
||
sha256_hex(tostring(math.random(1e12))):sub(1, 4),
|
||
sha256_hex(tostring(math.random(1e12))):sub(1, 12))
|
||
local ctype = contentType or "application/json"
|
||
local sts = loomySigningString(method, path, "", body, ctype, date, nonce)
|
||
local sig, err = opensslDigest("sha1", sts, aks)
|
||
if not sig then return nil, err or "签名计算失败" end
|
||
local h = {
|
||
["Authorization"] = "account " .. ak .. ":" .. sig,
|
||
["Date"] = date,
|
||
["Nonce"] = nonce,
|
||
["Content-Type"] = ctype,
|
||
}
|
||
local md5 = loomyContentMd5(body)
|
||
if md5 ~= "" then h["Content-MD5"] = md5 end
|
||
return h
|
||
end
|
||
|
||
-- devicePkce 生成一次授权的 verifier/challenge 对（SHA256 S256）。
|
||
-- verifier 自造：熵拼接后哈希。不依赖文件后段才定义的 newToken —— Lua 词法
|
||
-- 作用域下那会是 nil 全局调用。熵用 os.time + math.random 两次哈希拼接。
|
||
local function devicePkce()
|
||
local v = sha256_hex(tostring(os.time and os.time() or 0) .. math.random(1e12))
|
||
.. sha256_hex(tostring(math.random(1e12)))
|
||
return v, b64url(hexToBin(sha256_hex(v)))
|
||
end
|
||
|
||
-- deviceOneStep 推进一次设备码轮询，返回 (done, payload)。
|
||
-- done=true payload={ ok=true, access_token=.., refresh_token=.., account=.. }
|
||
-- 或 { ok=false, reason="denied"|"expired", message=.. }
|
||
-- done=false payload=nil（还在等：pending / slow_down）
|
||
-- sess 携带 device 上下文（device_code/verifier/interval），被本函数原地更新
|
||
--（slow_down 后 interval 增大，与参考一致）。
|
||
local function deviceOneStep(plat, sess)
|
||
local d = plat.device
|
||
local url, method, body = d.token_url, d.token_method or "POST", nil
|
||
if d.poll_query or (d.token_method == "GET_QUERY") then
|
||
-- 形态②（Qoder）：GET + query 模板。PKCE 用 verifier（不是 challenge），
|
||
-- 且 nonce 必须是**会话创建时那一个**（服务端按它找回待授权会话）。
|
||
local q = (d.poll_query or "")
|
||
:gsub("{nonce}", sess.device_nonce or sess.nonce or "")
|
||
:gsub("{verifier}", sess.device_verifier or "")
|
||
:gsub("{challenge}", sess.device_challenge or "")
|
||
:gsub("{device_code}", sess.device_code or "")
|
||
url = d.token_url .. "?" .. q
|
||
method = "GET"
|
||
else
|
||
body = (d.token_body
|
||
:gsub("{device_code}", sess.device_code or "")
|
||
:gsub("{verifier}", sess.device_verifier or "")
|
||
:gsub("{challenge}", sess.device_challenge or ""))
|
||
end
|
||
local resp, err = __llmsproxy_http({
|
||
url = url,
|
||
method = method,
|
||
headers = { ["Accept"] = "application/json", ["Content-Type"] = "application/x-www-form-urlencoded" },
|
||
body = body,
|
||
})
|
||
if err then return false end -- 网络抖动不算失败：与参考一致（pending 语义）
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if not ok or type(rec) ~= "table" then rec = {} end
|
||
|
||
-- 判据形态分两套（这正是 MiniMax 与 Cline 的核心差异，参考注释反复强调）：
|
||
-- minimax（默认）：看 HTTP 200 + status 字段；非 200 才看 error 字段。
|
||
-- workos（Cline）：看响应体 error 字段（HTTP 可能非 2xx）；
|
||
-- slow_down 退避 d.slow_down_step 秒（WorkOS 会持续限流不退避的客户端）；
|
||
-- access_denied / expired_token / invalid_grant 同组判失败。
|
||
-- 退避步长不硬编码：slow_down_step 缺省 5（MiniMax 语义）。
|
||
local workos = (d.judge == "workos")
|
||
local status = rec.status
|
||
local ecode = rec.error
|
||
local step = tonumber(d.slow_down_step) or 5
|
||
|
||
-- 「404/pending = 继续轮询」形态（Qoder）。
|
||
-- -- 实测依据（参考注释）：qoder.com 的 poll 路径返回 401，而
|
||
-- openapi.qoder.sh 对「无待授权会话」返回 **404**，语义是"还没有会话，继续等"
|
||
-- 而非失败。把 404 当失败会让登录永远失败。
|
||
-- 判定由平台声明 judge="pending404" 驱动，不在这里硬编码平台名。
|
||
if d.judge == "pending404" then
|
||
if resp.status == 404 then return false end
|
||
if resp.status == 200 then
|
||
-- 2xx 但尚无 token：同样继续轮询
|
||
local tok = rec.token or rec.device_token or rec.access_token
|
||
if tok == nil or tok == "" then return false end
|
||
return true, { ok = true, access_token = tok,
|
||
refresh_token = rec.refresh_token or rec.refreshToken,
|
||
account = rec.user_name or rec.userName or "",
|
||
uid = rec.user_id or rec.userId,
|
||
expires_at = rec.expires_at or rec.expiresAt,
|
||
refresh_expires_at = rec.refresh_token_expires_at or rec.refreshTokenExpiresAt }
|
||
end
|
||
return true, { ok = false, reason = "error",
|
||
message = "登录服务返回异常（HTTP " .. tostring(resp.status) .. "）" }
|
||
end
|
||
|
||
if workos then
|
||
if ecode == "authorization_pending" then return false end
|
||
if ecode == "slow_down" then
|
||
sess.device_interval = (sess.device_interval or d.interval or 5) + step
|
||
return false
|
||
end
|
||
if ecode == "access_denied" or ecode == "expired_token" or ecode == "invalid_grant" then
|
||
local msg = rec.error_description or (ecode == "access_denied" and "用户拒绝了授权" or "授权已过期")
|
||
return true, { ok = false, reason = (ecode == "access_denied" and "denied" or "expired"), message = msg }
|
||
end
|
||
if resp.status == 200 and rec.access_token and rec.refresh_token then
|
||
return true, { ok = true, access_token = rec.access_token, refresh_token = rec.refresh_token,
|
||
need_register = true, account = "cline" }
|
||
end
|
||
if resp.status ~= 200 and next(rec) ~= nil then
|
||
return true, { ok = false, reason = "error",
|
||
message = "WorkOS token 轮询失败（HTTP " .. tostring(resp.status) .. "）"
|
||
.. (rec.error_description and (" - " .. rec.error_description) or "") }
|
||
end
|
||
return false -- 2xx 但既无 error 又无 token：等下一拍（避免误报死循环）
|
||
end
|
||
|
||
-- MiniMax 形态（原样保留，已由决策表测试钉死）
|
||
if resp.status == 200 and status == "pending" then return false end
|
||
if resp.status == 200 and status == "slow_down" then
|
||
sess.device_interval = (sess.device_interval or d.interval or 5) + step
|
||
return false
|
||
end
|
||
if resp.status == 200 and (status == "denied" or status == "access_denied") then
|
||
return true, { ok = false, reason = "denied", message = "用户拒绝了授权" }
|
||
end
|
||
if resp.status == 200 and (status == "expired" or status == "expired_token") then
|
||
return true, { ok = false, reason = "expired", message = "设备码已过期，请重新发起登录" }
|
||
end
|
||
if ecode == "authorization_pending" then return false end
|
||
if ecode == "slow_down" then
|
||
sess.device_interval = (sess.device_interval or d.interval or 5) + step
|
||
return false
|
||
end
|
||
if resp.status == 200 and rec.access_token then
|
||
return true, { ok = true, access_token = rec.access_token,
|
||
refresh_token = rec.refresh_token, account = rec.nickname or rec.sub or "" }
|
||
end
|
||
return true, { ok = false, reason = "error", message = "授权失败: " .. tostring(ecode or ("HTTP " .. tostring(resp.status))) }
|
||
end
|
||
|
||
-- wechatExchange：把微信 wx_code 换成 Loomy 凭据（讯飞账号端点，HMAC-SHA1 签名）。
|
||
--
|
||
-- 参考链路（loomy-oauth.ts 注释）：bindAuthThirdAccount(code) → {bind, rcode, nickname}
|
||
-- → 若已绑手机号可 bindSkip(rcode) 直接拿 session；未绑则要走 SMS（需人工输入验证码）。
|
||
-- 这里做到 bindAuth 一步：拿到 rcode/nickname 即视为可用的登录上下文，
|
||
-- 并把 bind 标志带进凭据，让上层知道是否需要补手机号（不假装 SMS 已完成）。
|
||
local function wechatExchange(plat, wxCode)
|
||
local w = plat.wechat
|
||
if not w then return nil, "平台未声明 wechat 配置" end
|
||
local path = w.bind_path
|
||
local body = json.encode({
|
||
tcode = { code = wxCode },
|
||
type = "wx",
|
||
appId = w.app_id,
|
||
})
|
||
local headers, herr = loomyAuthHeaders(w.access_key_id, w.access_key_secret,
|
||
"POST", path, body, "application/json")
|
||
if not headers then return nil, "签名失败: " .. tostring(herr) end
|
||
headers["Accept"] = "application/json"
|
||
local resp, err = __llmsproxy_http({
|
||
url = w.account_base .. path, method = "POST", headers = headers, body = body,
|
||
})
|
||
if err then return nil, "账号端点请求失败: " .. err end
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if not ok or type(rec) ~= "table" then
|
||
return nil, "账号端点响应无法解析（HTTP " .. tostring(resp.status) .. "）"
|
||
end
|
||
-- 参考兼容 data 包裹与顶层两种形态
|
||
local data = type(rec.data) == "table" and rec.data or rec
|
||
local rcode = data.rcode
|
||
if type(rcode) ~= "string" or rcode == "" then
|
||
return nil, "微信授权响应缺少 rcode（code 可能已失效）"
|
||
end
|
||
-- bind 缺失归 0（走绑定流程）—— 保守方向：已绑最多多填一次手机号；
|
||
-- 未绑却跳过会拿到没有手机号的账号。
|
||
local bind = (data.bind == 1) and 1 or 0
|
||
return json.encode({
|
||
access_token = rcode, -- 后续所有步骤用 rcode（wx_code 只用这一次）
|
||
rcode = rcode,
|
||
bind = bind,
|
||
session = data.session or data.token,
|
||
user_id = data.userid or data.user_id,
|
||
nickname = data.nickname,
|
||
headpic = data.headpic,
|
||
phone_bound = bind == 1,
|
||
token_type = "Bearer",
|
||
account_type = "personal",
|
||
}), nil
|
||
end
|
||
|
||
-- deviceRegister：设备码成功后的第二跳（Cline：WorkOS token → Cline token）。
|
||
-- 参考注释强调：两步是必要的（浏览器 transient activation 约 5 秒，阻塞式
|
||
-- 等授权会让 URL 过期）。返回 (access_token, account, nil) 或 (nil, nil, err)。
|
||
local function deviceRegister(plat, payload)
|
||
local r = plat.register
|
||
if not r or not r.url then return payload.access_token, payload.account, nil end
|
||
local body = (r.body or "")
|
||
:gsub("{access_token}", payload.access_token or "")
|
||
:gsub("{refresh_token}", payload.refresh_token or "")
|
||
local resp, err = __llmsproxy_http({
|
||
url = r.url,
|
||
method = r.method or "POST",
|
||
headers = { ["Content-Type"] = "application/json", ["Accept"] = "application/json" },
|
||
body = body,
|
||
})
|
||
if err then return nil, nil, "token 注册失败: " .. err end
|
||
if resp.status ~= 200 then
|
||
return nil, nil, "token 注册失败（HTTP " .. tostring(resp.status) .. "）"
|
||
end
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if not ok or type(rec) ~= "table" then
|
||
return nil, nil, "token 注册响应无法解析"
|
||
end
|
||
-- 响应套 {success, data} 信封（参考 parseClineTokenPayload）
|
||
local data = rec.data or rec
|
||
local access = data.accessToken or data.access_token or data.Token or data.token
|
||
if not access or access == "" then
|
||
return nil, nil, "token 注册响应缺少 accessToken"
|
||
end
|
||
local acct = "cline"
|
||
if type(data.userInfo) == "table" and (data.userInfo.email or data.userInfo.clineUserId) then
|
||
acct = tostring(data.userInfo.email or data.userInfo.clineUserId)
|
||
end
|
||
return access, acct, nil
|
||
end
|
||
|
||
-- platformById 查平台定义；未知 id 返回 nil（调用方必须处理，而不是拿到空表）。
|
||
--
|
||
-- 先查内建目录，再查运行时注入表（plugin.state.injected_platforms）。注入表的存在
|
||
-- 是因为**测试夹具绝不能写成生产源码**：此前 example/googleish/loopbackish/
|
||
-- cookieish 四个夹具直接内联在 PLATFORMS 里，于是它们真的出现在生产 UI（16 个
|
||
-- 平台里有 4 个是夹具）供运维选择。夹具属于测试，不属于发行物 —— 正确形态是
|
||
-- 测试用自己的那几行注入（见 channels/test_platforms 端点），生产目录只留真实厂商。
|
||
local function platformById(id)
|
||
for _, p in ipairs(PLATFORMS) do
|
||
if p.id == id then return p end
|
||
end
|
||
local injected = plugin.state and plugin.state.injected_platforms
|
||
if type(injected) == "table" then
|
||
for _, p in ipairs(injected) do
|
||
if type(p) == "table" and p.id == id then return p end
|
||
end
|
||
end
|
||
return nil
|
||
end
|
||
|
||
-- allPlatforms 返回内建目录 + 注入表（列表/遍历用）。
|
||
local function allPlatforms()
|
||
local out = {}
|
||
for _, p in ipairs(PLATFORMS) do out[#out + 1] = p end
|
||
local injected = plugin.state and plugin.state.injected_platforms
|
||
if type(injected) == "table" then
|
||
for _, p in ipairs(injected) do
|
||
if type(p) == "table" and p.id then out[#out + 1] = p end
|
||
end
|
||
end
|
||
return out
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 状态
|
||
-- ============================================================================
|
||
|
||
-- ============================================================================
|
||
-- 插件自有持久化（账号池 / 模型黑名单 / 设置 / 日志）
|
||
-- ============================================================================
|
||
--
|
||
-- 为什么插件自己落盘，而不是靠宿主框架的 plugin.state：
|
||
-- 本插件声明 hooks = {}，一切状态变更都走自己的 HTTP 路由。宿主的状态自动
|
||
-- flush 由 hook / Call / handler 三条分发路径触发，插件不应把「我的状态会不会
|
||
-- 被写下去」押在宿主某条路径的实现细节上 —— 那是把插件的数据安全外包给宿主。
|
||
-- 参考实现踩过同一课（channel-pack-store.ts）：宿主 settings 能力一变，账号
|
||
-- 列表就退化为纯内存，必须改由插件自持文档。
|
||
--
|
||
-- 位置与凭据分离：凭据在 .secrets/（0600，跨插件不可读），这里只放**索引与
|
||
-- 配置**（账号条目含 credentialRef 而非凭据本身、模型黑名单、设置、事件日志）。
|
||
-- 即便这个文件泄露，也不含任何 token。
|
||
--
|
||
-- 写入：tmp + rename 原子替换。读：缺失/损坏 → 用内置默认值（不阻塞启动）。
|
||
local STORE_NAME = ".channels-store.json"
|
||
|
||
-- storeDir 求插件目录：优先 config.yaml 的 plugin_dir，否则用本文件所在目录。
|
||
-- 插件与内核同机、有完整 OS 权限，读自己的配置是能力范围内的事。
|
||
local function storeDir()
|
||
-- 显式覆盖优先（测试与多实例部署都靠它隔离，避免读到别处的生产配置）
|
||
local env = os.getenv and os.getenv("LLMSPROXY_PLUGIN_DIR")
|
||
if type(env) == "string" and env ~= "" then return env end
|
||
local s = plugin.state.settings and plugin.state.settings.store_dir
|
||
if type(s) == "string" and s ~= "" then return s end
|
||
for _, path in ipairs({ "/etc/llmsproxy/config.yaml", "/usr/local/etc/llmsproxy/config.yaml" }) do
|
||
local f = io.open(path, "r")
|
||
if f then
|
||
local txt = f:read("*a")
|
||
f:close()
|
||
if txt then
|
||
local d = txt:match("\nplugin_dir:%s*([^\n]%S*)") or txt:match("^plugin_dir:%s*([^\n]%S*)")
|
||
if d and d ~= "" then return d end
|
||
end
|
||
end
|
||
end
|
||
return "/etc/llmsproxy/plugins"
|
||
end
|
||
|
||
-- persistKeys 是要落盘的字段。故意不含 sessions（登录会话是短命态，重启即失效，
|
||
-- 写下去只会留下过期垃圾）与 browser（进程 pid 跨重启无意义）。
|
||
local PERSIST_KEYS = {
|
||
"accounts", "pool", "modelDisabled", "settings",
|
||
"providerOrder", "log", "injected_platforms",
|
||
-- 远端拉到的模型目录缓存（远端为主、兜底补位的结果）。
|
||
-- 缓存它而非每次请求都拉：上游目录是分钟级稳定，UI 却是秒级刷新。
|
||
"remoteModels",
|
||
}
|
||
|
||
local function persistState()
|
||
local dir = storeDir()
|
||
local path = dir .. "/" .. STORE_NAME
|
||
local snap = {}
|
||
for _, k in ipairs(PERSIST_KEYS) do
|
||
if plugin.state[k] ~= nil then snap[k] = plugin.state[k] end
|
||
end
|
||
local body = json.encode({ version = 1, state = snap })
|
||
if not body then return false, "json.encode 失败" end
|
||
local tmp = path .. ".tmp"
|
||
local w = io.open(tmp, "w")
|
||
if not w then return false, "无法写入 " .. tmp end
|
||
w:write(body)
|
||
w:close()
|
||
os.execute(("chmod 0600 %s 2>/dev/null"):format(tmp))
|
||
local ok = os.rename(tmp, path)
|
||
if not ok then
|
||
os.remove(tmp)
|
||
return false, "rename 失败"
|
||
end
|
||
return true
|
||
end
|
||
|
||
local function applySnapshot(snap)
|
||
for _, k in ipairs(PERSIST_KEYS) do
|
||
if snap[k] ~= nil then plugin.state[k] = snap[k] end
|
||
end
|
||
end
|
||
|
||
-- dropLegacyKernelState 删除内核遗留文件（若存在）。
|
||
--
|
||
-- 必须删：内核的 restore() 在插件源码执行**之后**运行，会把这个文件的内容整体
|
||
-- 覆盖到 plugin.state 上。自有存储已经是权威，留下它等于给"下次启动被旧数据
|
||
-- 覆盖"留一个后门。删它不需要先读它（迁移路径自己会读）。
|
||
local function dropLegacyKernelState()
|
||
local legacy = storeDir() .. "/.channels.state.json"
|
||
local f = io.open(legacy, "r")
|
||
if not f then return end
|
||
f:close()
|
||
os.remove(legacy)
|
||
io.stderr:write("[channels] 已删除内核遗留状态文件（自有存储为权威）\n")
|
||
end
|
||
|
||
-- loadState 读插件自有文档；缺失时**从内核遗留文件迁移一次**。
|
||
--
|
||
-- 历史背景：v2.0.4 曾让内核的 InvokeHandler 补 markDirty，于是状态被内核写到了
|
||
-- `.channels.state.json`（内核的 <plugin>.state.json 命名）。现在内核改动已回退，
|
||
-- 那个文件不会再被内核读写；但生产上已经存在一份（含真实账号池），必须迁移过来，
|
||
-- 否则升级即丢账号 —— 与本次要修的缺陷同类，不能自己再造一次。
|
||
-- 迁移后删除遗留文件：留着它只会让「哪个文件权威」变成永久的疑团。
|
||
local function loadOwnSnapshot()
|
||
local dir = storeDir()
|
||
local f = io.open(dir .. "/" .. STORE_NAME, "r")
|
||
if f then
|
||
local txt = f:read("*a")
|
||
f:close()
|
||
if txt and txt ~= "" then
|
||
local ok, rec = pcall(json.decode, txt)
|
||
if ok and type(rec) == "table" and type(rec.state) == "table" then
|
||
applySnapshot(rec.state)
|
||
return true
|
||
end
|
||
-- 损坏文件不阻塞：用内置默认值（下次写入覆盖它）
|
||
io.stderr:write("[channels] 自有存储损坏，改用默认值\n")
|
||
end
|
||
end
|
||
return false
|
||
end
|
||
|
||
-- migrateLegacyKernelState 把内核遗留的 .channels.state.json 搬进自有文档。
|
||
local function migrateLegacyKernelState()
|
||
local dir = storeDir()
|
||
local legacy = dir .. "/.channels.state.json"
|
||
local f = io.open(legacy, "r")
|
||
if not f then return false end
|
||
local txt = f:read("*a")
|
||
f:close()
|
||
if not txt or txt == "" then return false end
|
||
local ok, rec = pcall(json.decode, txt)
|
||
if not ok or type(rec) ~= "table" or type(rec.state) ~= "table" then
|
||
return false
|
||
end
|
||
applySnapshot(rec.state)
|
||
-- 立即写成自有文档；**只有写成功才删遗留文件** —— 写失败还删它，
|
||
-- 等于用一次迁移把数据弄丢，与本次要修的缺陷同类。
|
||
local written, werr = persistState()
|
||
if written then
|
||
os.remove(legacy)
|
||
io.stderr:write("[channels] 已迁移遗留状态到 " .. STORE_NAME .. "\n")
|
||
else
|
||
io.stderr:write("[channels] 遗留状态迁移写入失败（保留原文件）: "
|
||
.. tostring(werr) .. "\n")
|
||
end
|
||
return true
|
||
end
|
||
|
||
local function loadState()
|
||
if loadOwnSnapshot() then
|
||
-- 自有存储已权威：遗留文件必须删掉，否则内核 restore() 会用它覆盖
|
||
dropLegacyKernelState()
|
||
return true
|
||
end
|
||
return migrateLegacyKernelState()
|
||
end
|
||
|
||
-- markDirty = 立即同步落盘（tmp + rename 原子替换）。
|
||
--
|
||
-- 为什么不用「置标志 + 定时 flush」：本插件没有 hooks，45 个端点各自
|
||
-- 直接变更状态，还有大量内部调用（syncAccountSource / claim_daily /
|
||
-- auto_checkin 互调）。把 flush 挂在某个边界上就必须保证**每一条**路径都经过
|
||
-- 它，漏一条就是「操作成功但重启丢失」——正是本次要修的缺陷形态。同步写在
|
||
-- 变更点，路径覆盖是结构性的，不依赖我数全 45 个入口。
|
||
--
|
||
-- 代价可接受：状态很小（实测 ~1.7KB），channels 没有 chat 钩子，写入只发生在
|
||
-- 运维动作（登录/领取/开关）与登录轮询（未完成时才有）上，不在请求热路径。
|
||
-- 参考实现同样是每次变更 writeFileSync + renameSync。
|
||
--
|
||
-- 失败处理：写失败**不从状态里回滚**内存变更（内存是对的），只留痕到 stderr
|
||
-- ——不递归调 logEvent，那会再次触发 markDirty。
|
||
local function markDirty()
|
||
local ok, err = persistState()
|
||
if not ok then
|
||
io.stderr:write("[channels] 状态落盘失败: " .. tostring(err) .. "\n")
|
||
end
|
||
end
|
||
|
||
plugin.state = plugin.state or {}
|
||
plugin.state.accounts = plugin.state.accounts or {}
|
||
plugin.state.log = plugin.state.log or {}
|
||
|
||
-- 启动时从插件自有文档恢复（必须在 plugin.state 建表之后：loadState 往表里填
|
||
-- 字段，先填再被 or {} 覆盖就白填了）。
|
||
loadState()
|
||
|
||
local function logEvent(msg)
|
||
table.insert(plugin.state.log, 1, { at = os.time and os.time() or 0, msg = msg })
|
||
while #plugin.state.log > 50 do table.remove(plugin.state.log) end
|
||
markDirty()
|
||
end
|
||
|
||
-- accountOf 取某平台的账号记录（凭据本身在保险库，不在 state 里）
|
||
local function accountOf(id)
|
||
return plugin.state.accounts[id]
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 账号池（对齐参考 account.* RPC 契约）：一个平台可挂多个账号
|
||
-- ============================================================================
|
||
-- plugin.state.pool[provider] = { [accountId] = 条目 }，条目字段对齐参考
|
||
-- AccountEntry：{ id, provider, nickname, enabled, credentialRef, refreshable,
|
||
-- createdAt, expiresAt }。凭据在保险库（credentialRef 即保险库键），不入 state。
|
||
--
|
||
-- 兼容：旧的单账号路径（state.accounts）保留 —— e2e 与既有端点仍走它。
|
||
local function poolTable()
|
||
if not plugin.state.pool then plugin.state.pool = {} end
|
||
return plugin.state.pool
|
||
end
|
||
|
||
local function poolAccounts(provider)
|
||
local t = poolTable()[provider]
|
||
if not t then t = {} poolTable()[provider] = t end
|
||
return t
|
||
end
|
||
|
||
local function poolList(provider)
|
||
local out = {}
|
||
for _, a in pairs(poolAccounts(provider)) do out[#out+1] = a end
|
||
table.sort(out, function(x, y)
|
||
local px, py = x.priority or 0, y.priority or 0
|
||
if px ~= py then return px > py end -- priority 大者优先（参考 reorder 语义）
|
||
return (x.createdAt or 0) < (y.createdAt or 0)
|
||
end)
|
||
return out
|
||
end
|
||
|
||
local function poolGet(provider, accountId)
|
||
return poolAccounts(provider)[accountId]
|
||
end
|
||
|
||
local function poolAdd(provider, entry)
|
||
poolAccounts(provider)[entry.id] = entry
|
||
markDirty()
|
||
end
|
||
|
||
local function poolRemove(provider, accountId)
|
||
poolAccounts(provider)[accountId] = nil
|
||
markDirty()
|
||
end
|
||
|
||
-- 凭据取值：保险库里存的可能是**裸 token**（历史/device-poll/paste 路径），
|
||
-- 也可能是**完整凭据 JSON**（ buddy / workbuddy 等 state-poll 平台，对齐参考
|
||
-- buildCredential 的结构：access_token + refresh_token + expires_at + domain + ...）。
|
||
--
|
||
-- 本助手统一取出可用的 access token（及 refresh_token），使所有 HTTP 消费点
|
||
-- （Bearer 头、HMAC 签名）无需关心存的是哪种形态：
|
||
-- 裸 token → 原样返回
|
||
-- 完整凭据 JSON 字符串 → 取 .access_token
|
||
-- 已经是 table → 取 .access_token
|
||
-- 返回 (accessToken, refreshToken, fullTableOrNil)。两者都空时返回 (nil, nil, nil)。
|
||
local function credentialOf(ref)
|
||
local raw = ref and __llmsproxy_secrets.get(ref)
|
||
if not raw or raw == "" then return nil, nil, nil end
|
||
-- 裸 token 快路：不含 '{' 的字符串直接当 token（绝大多数历史数据）
|
||
if type(raw) == "string" and raw:sub(1, 1) ~= "{" then return raw, nil, nil end
|
||
local ok, rec = pcall(json.decode, type(raw) == "string" and raw or "")
|
||
if ok and type(rec) == "table" then
|
||
local at = rec.access_token or rec.accessToken or rec.token
|
||
local rt = rec.refresh_token or rec.refreshToken
|
||
if at and at ~= "" then return at, rt, rec end
|
||
-- 是 JSON 但没有 access_token：回退原样（可能是别的形状的凭据）
|
||
return raw, rt, rec
|
||
end
|
||
return raw, nil, nil
|
||
end
|
||
|
||
-- credentialFull 取完整凭据（供需要 refresh_token/expires_at 的路径用）。
|
||
local function credentialFull(ref)
|
||
local _, _, full = credentialOf(ref)
|
||
return full
|
||
end
|
||
|
||
-- jwtClaim 从 JWT 的 payload 读一个声明（不验签，仅用于读取展示/续期元数据）。
|
||
-- 对齐参考 buddy.ts 的 jwtNickname / jwtExpiresAtMs / jwtSubject：
|
||
-- CodeBuddy 的 login/account 响应**不含昵称**，昵称只在 access_token 的声明里；
|
||
-- token 端又只返回 expiresIn（相对秒数）而不含 expiresAt。两处都得从 JWT 兜底。
|
||
-- 解析失败返回 nil（调用方自行处理）。
|
||
-- b64url_decode 纯 Lua 的 base64url 解码（读 JWT payload 用）。
|
||
--
|
||
-- 为什么不用内核的 base64 能力：内核只提供 encode（适配器签名要用），没有 decode。
|
||
-- 为读一个 JWT 声明而给内核加一个通用解码函数，是把插件的事推给内核 ——
|
||
-- 插件能做就该自己做。纯 Lua 实现约 20 行，无依赖、无内核改动。
|
||
-- 接受标准/URL-safe 两种字母表，容忍缺失填充。
|
||
local B64_ALPHABET = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"
|
||
local B64_LOOKUP = {}
|
||
for i = 1, #B64_ALPHABET do B64_LOOKUP[B64_ALPHABET:sub(i, i)] = i - 1 end
|
||
local function b64url_decode(input)
|
||
if type(input) ~= "string" or input == "" then return nil end
|
||
-- 归一化：URL-safe → 标准，去空白，去掉填充（下面按 4 位一组补零处理）
|
||
local s = input:gsub("%s", ""):gsub("-", "+"):gsub("_", "/"):gsub("=", "")
|
||
local out, acc, bits = {}, 0, 0
|
||
for i = 1, #s do
|
||
local v = B64_LOOKUP[s:sub(i, i)]
|
||
if v == nil then return nil end -- 非法字符：如实失败，不猜
|
||
acc = acc * 64 + v
|
||
bits = bits + 6
|
||
if bits >= 8 then
|
||
bits = bits - 8
|
||
local byte = math.floor(acc / (2 ^ bits)) % 256
|
||
out[#out + 1] = string.char(byte)
|
||
acc = acc % (2 ^ bits)
|
||
end
|
||
end
|
||
return table.concat(out)
|
||
end
|
||
|
||
local function jwtClaim(token, name)
|
||
if type(token) ~= "string" or token == "" then return nil end
|
||
local payload = token:match("^[^%.]+%.([^%.]+)")
|
||
if not payload then return nil end
|
||
local bin = b64url_decode(payload)
|
||
if not bin then return nil end
|
||
local ok, rec = pcall(json.decode, bin)
|
||
if not ok or type(rec) ~= "table" then return nil end
|
||
return rec[name]
|
||
end
|
||
|
||
-- stripControl 去掉控制字符（含 CR/LF/Tab）并把连续空白折叠为单个空格。
|
||
-- 对齐参考 stripControlChars：CodeBuddy 的 scope 字段有时返回多行文本，
|
||
-- 原样落盘会在序列化时被当作多行标量，破坏后续 JSON 解析。
|
||
local function stripControl(v)
|
||
if type(v) ~= "string" then return v end
|
||
v = v:gsub("[%z\1-\31\127]+", " ")
|
||
v = v:gsub("%s%s+", " ")
|
||
return (v:gsub("^%s+", ""):gsub("%s+$", ""))
|
||
end
|
||
|
||
-- readStr 从响应表安全读字符串字段（兼容后端把数字返为数字）。
|
||
local function readStr(rec, key)
|
||
if type(rec) ~= "table" then return "" end
|
||
local v = rec[key]
|
||
if type(v) == "string" then return stripControl(v) end
|
||
if type(v) == "number" then return tostring(v) end
|
||
return ""
|
||
end
|
||
|
||
-- absExpiryMs 把绝对字段或相对秒数换算为毫秒时间戳字符串。
|
||
-- 对齐参考 absoluteExpiryMs：
|
||
-- ① 绝对字段（expiresAt/refreshExpiresAt）存在 → 归一化为毫秒字符串
|
||
-- ② 否则用相对秒数（expiresIn/refreshExpiresIn）+ access_token 的 JWT iat 兜底
|
||
-- ③ 都没有 → 返回空串（由 credentialExpiresAtMs 再从 JWT exp 兜底）
|
||
-- 实测：CodeBuddy 的 /v2/plugin/auth/token 只返回 expiresIn，没有 expiresAt；
|
||
-- 不换算的话凭据的 expires_at 永远是空串，UI 一直显示"有效期未知"。
|
||
local function absExpiryMs(rec, absKey, relKey, accessToken)
|
||
local absolute = readStr(rec, absKey)
|
||
if absolute ~= "" then
|
||
if absolute:match("^%d+$") then
|
||
local n = tonumber(absolute)
|
||
if n then
|
||
return tostring(n > 1e12 and n or n * 1000)
|
||
end
|
||
end
|
||
return absolute
|
||
end
|
||
local rel = rec[relKey]
|
||
local relSec = nil
|
||
if type(rel) == "number" then relSec = rel
|
||
elseif type(rel) == "string" and rel:match("^%-?%d+%.?%d*$") then relSec = tonumber(rel) end
|
||
if relSec == nil then return "" end
|
||
-- 基准：access_token 的 iat（签发时刻）优先，缺失时用当前时刻。
|
||
local iat = jwtClaim(accessToken, "iat")
|
||
local baseMs = (type(iat) == "number" and iat * 1000) or (os.time and os.time() * 1000 or 0)
|
||
return tostring(baseMs + relSec * 1000)
|
||
end
|
||
|
||
-- buildCredential 把 token 响应 + account 响应组合为可持久化的完整凭据 JSON。
|
||
-- 逐字段对齐参考 buddy.ts 的 buildCredential / parseTokenData / parseAccountData：
|
||
-- access_token / refresh_token / expires_at / refresh_expires_at /
|
||
-- token_type / scope / domain / user_id / nickname / enterprise_id / account_type
|
||
-- 昵称回填顺序：account.nickname → JWT.nickname → JWT.preferred_username。
|
||
-- expires_at 同理：token.expiresAt 为空时由 absExpiryMs 用 expiresIn 或 JWT exp 兜底。
|
||
local function buildCredential(data, accountData)
|
||
local access = readStr(data, "accessToken")
|
||
if access == "" then access = readStr(data, "access_token") end
|
||
local refresh = readStr(data, "refreshToken")
|
||
if refresh == "" then refresh = readStr(data, "refresh_token") end
|
||
local tokenType = readStr(data, "tokenType")
|
||
if tokenType == "" then tokenType = "Bearer" end
|
||
local acct = type(accountData) == "table" and accountData or {}
|
||
local nickname = readStr(acct, "nickname")
|
||
if nickname == "" then nickname = readStr(acct, "nickName") end
|
||
if nickname == "" then
|
||
local jn = jwtClaim(access, "nickname")
|
||
if type(jn) ~= "string" or jn == "" then jn = jwtClaim(access, "preferred_username") end
|
||
if type(jn) ~= "string" or jn == "" then jn = jwtClaim(access, "name") end
|
||
if type(jn) == "string" then nickname = stripControl(jn) end
|
||
end
|
||
local uid = readStr(acct, "uid")
|
||
if uid == "" then
|
||
local sub = jwtClaim(access, "sub")
|
||
if type(sub) == "string" then uid = sub end
|
||
end
|
||
local acctType = readStr(acct, "type")
|
||
if acctType == "" then acctType = "personal" end
|
||
return {
|
||
access_token = access,
|
||
refresh_token = refresh,
|
||
expires_at = absExpiryMs(data, "expiresAt", "expiresIn", access),
|
||
refresh_expires_at = absExpiryMs(data, "refreshExpiresAt", "refreshExpiresIn", access),
|
||
token_type = tokenType,
|
||
scope = readStr(data, "scope"),
|
||
domain = readStr(data, "domain"),
|
||
user_id = uid,
|
||
nickname = nickname,
|
||
enterprise_id = readStr(acct, "enterpriseId"),
|
||
account_type = acctType,
|
||
}
|
||
end
|
||
|
||
-- credentialExpiresAtMs 从凭据表解析毫秒过期时刻（兼容毫秒/秒级时间戳/ISO）。
|
||
-- 对齐参考 credentialExpiresAtMs：expires_at 为空时回退解析 access_token 的 JWT exp。
|
||
local function credentialExpiresAtMs(cred)
|
||
if type(cred) ~= "table" then return nil end
|
||
local raw = cred.expires_at
|
||
if type(raw) == "string" and raw ~= "" then
|
||
if raw:match("^%d+$") then
|
||
local n = tonumber(raw)
|
||
if n then return n > 1e12 and n or n * 1000 end
|
||
end
|
||
-- ISO 8601：解析 "YYYY-MM-DDThh:mm:ss" 形态（无时区偏移时按 UTC）
|
||
local Y, Mo, D, H, Mi, S = raw:match("^(%d%d%d%d)%-(%d%d)%-(%d%d)T(%d%d):(%d%d):(%d%d)")
|
||
if Y then return os.time({ year = tonumber(Y), month = tonumber(Mo), day = tonumber(D),
|
||
hour = tonumber(H), min = tonumber(Mi), sec = tonumber(S), isdst = false }) * 1000 end
|
||
end
|
||
local exp = jwtClaim(cred.access_token, "exp")
|
||
if type(exp) == "number" then return exp * 1000 end
|
||
return nil
|
||
end
|
||
|
||
-- credentialIsRefreshable 凭据是否携带可静默续期的 refresh_token。
|
||
local function credentialIsRefreshable(cred)
|
||
return type(cred) == "table" and type(cred.refresh_token) == "string" and cred.refresh_token ~= ""
|
||
end
|
||
|
||
-- 模型黑名单（对齐参考 model.setDisabled）：provider → { [modelId] = true }
|
||
-- ============================================================================
|
||
-- 远端模型目录：**远端为主 + 兜底补位**（照参考的 reconcileWithFallback）
|
||
-- ============================================================================
|
||
--
|
||
-- 为什么不只用硬编码名单：上游模型目录是**会变**的（新增/下线/改名），
|
||
-- 硬编码必然过期。为什么不只用远端：远端可能拉不到（未登录/网络抖动/端点变更），
|
||
-- 那时平台就"没有模型可用"了。
|
||
--
|
||
-- 故正确形态是**合并**而非"远端失败就用兜底"的简单回退（参考 cline-models.ts
|
||
-- 明确写了这一条）：远端有的以远端为准，远端没有的用兜底表补。
|
||
--
|
||
-- 注意：兜底表是**编译期快照**，价格/倍率会变，故兜底条目不携带价格类字段。
|
||
|
||
-- 取该平台**当前有效**的模型目录（远端优先，兜底补位，剔除黑名单）。
|
||
local function effectiveModels(provider)
|
||
local plat = platformById(provider)
|
||
if not plat then return {} end
|
||
local remote = plugin.state.remoteModels and plugin.state.remoteModels[provider]
|
||
local out, seen = {}, {}
|
||
-- 远端在前（权威顺序）
|
||
if type(remote) == "table" and type(remote.ids) == "table" then
|
||
for _, id in ipairs(remote.ids) do
|
||
if type(id) == "string" and id ~= "" and not seen[id] then
|
||
seen[id] = true out[#out+1] = id
|
||
end
|
||
end
|
||
end
|
||
-- 兜底补位（只补远端没有的）
|
||
for _, id in ipairs(plat.models or {}) do
|
||
if not seen[id] then seen[id] = true out[#out+1] = id end
|
||
end
|
||
return out
|
||
end
|
||
|
||
-- parseRemoteModels(parse, body)：把各平台响应解析成 id 列表。
|
||
-- 每个分支的字段路径都照参考实现，含注释点名的坑。
|
||
local function parseRemoteModels(kind, body)
|
||
local ok, rec = pcall(json.decode, body or "")
|
||
if not ok or type(rec) ~= "table" then return {} end
|
||
local out = {}
|
||
|
||
if kind == "id_list" then
|
||
-- OpenAI 风格 {data:[{id}]}；也有平台直接给数组或 {models:[...]}
|
||
local arr = rec.data or rec.models or rec
|
||
if type(arr) == "table" then
|
||
for _, m in ipairs(arr) do
|
||
local id = type(m) == "table" and m.id or (type(m) == "string" and m)
|
||
if type(id) == "string" and id ~= "" then out[#out+1] = id end
|
||
end
|
||
end
|
||
|
||
elseif kind == "buddy_config" then
|
||
-- 照参考 parseModelsFromConfig：结果在 data.models / data.agents 结构里。
|
||
-- 多形态兜底（顶层 data / 直接 models），因为该端点历史上变过形状。
|
||
local d = rec.data or rec
|
||
local arr = d.models or d.agents or rec.models
|
||
if type(arr) == "table" then
|
||
for _, m in ipairs(arr) do
|
||
local id = type(m) == "table" and (m.id or m.modelId or m.name)
|
||
if type(id) == "string" and id ~= "" then out[#out+1] = id end
|
||
end
|
||
end
|
||
|
||
elseif kind == "zcode_configs" then
|
||
-- 照参考 fetchZcodeModels：字段是 data.builtinModels，且它是**对象**
|
||
-- （键为序号 "0"/"1"），用 Array.isArray 判定会得到 0 个模型的假阴性。
|
||
-- Lua 里表无此区别，但要同时支持数组与 map 两形态。
|
||
local raw = rec.data and rec.data.builtinModels
|
||
if type(raw) == "table" then
|
||
for _, m in pairs(raw) do
|
||
local id = type(m) == "table" and (m.modelId or m.id)
|
||
if type(id) == "string" and id ~= "" then out[#out+1] = id end
|
||
end
|
||
end
|
||
|
||
elseif kind == "cline_merge" then
|
||
-- 照参考 cline-models.ts：**必须同时打两个端点**。
|
||
-- recommended-models 是**唯一权威的 free 集合**；/api/v1/models 的 460 个
|
||
-- id 里根本没有 cline-free/*。故这里把它们合并去重。
|
||
local function pushFrom(node)
|
||
if type(node) ~= "table" then return end
|
||
local arr = node.data or node
|
||
if type(arr) ~= "table" then return end
|
||
for _, m in ipairs(arr) do
|
||
local id = type(m) == "table" and m.id or (type(m) == "string" and m)
|
||
if type(id) == "string" and id ~= "" then out[#out+1] = id end
|
||
end
|
||
end
|
||
-- free 数组优先在前（它含 cline-free/* 与 stealth/*）
|
||
pushFrom(rec.free)
|
||
pushFrom(rec)
|
||
end
|
||
|
||
return out
|
||
end
|
||
|
||
-- refreshRemoteModels(provider)：拉取并缓存该平台的远端目录。
|
||
-- 返回 (ids, err)；**任何失败都不清空既有缓存**（宁可留旧目录也别让平台变空）。
|
||
local function refreshRemoteModels(provider)
|
||
local plat = platformById(provider)
|
||
if not plat then return nil, "未知平台" end
|
||
local mr = plat.models_remote
|
||
if not mr then return nil, "该平台无远端目录端点" end
|
||
-- 取一个可用账号的凭据（无账号则无凭据，仅当 auth=none 时仍可拉）
|
||
local tok
|
||
for _, a in ipairs(poolList(provider)) do
|
||
if a.enabled ~= false then
|
||
local t = credentialOf(a.credentialRef)
|
||
if t and t ~= "" then tok = t break end
|
||
end
|
||
end
|
||
if (not tok or tok == "") and mr.auth ~= "none" then return nil, "无可用凭据" end
|
||
|
||
local merged, seen = {}, {}
|
||
local lastErr
|
||
for _, ep in ipairs(mr.endpoints or {}) do
|
||
local url = ep.url
|
||
if ep.query then url = url .. "?" .. ep.query end
|
||
local headers = { ["Accept"] = "application/json" }
|
||
local useAuth = ep.url_auth ~= false and mr.auth ~= "none"
|
||
if useAuth and tok and tok ~= "" then
|
||
headers["Authorization"] = "Bearer " .. tok
|
||
end
|
||
-- 平台级身份头（buddy 必须带 X-Product-Code 等，否则会被当成另一个产品）
|
||
if mr.headers_fn and plat.headers_fn then
|
||
local extra = plat.headers_fn(tok or "", nil)
|
||
for k, v in pairs(extra or {}) do headers[k] = v end
|
||
end
|
||
local resp, err = __llmsproxy_http({
|
||
url = url, method = ep.method or "GET", headers = headers,
|
||
})
|
||
if err or not resp or resp.status ~= 200 then
|
||
lastErr = (err or ("HTTP " .. tostring(resp and resp.status)))
|
||
else
|
||
for _, id in ipairs(parseRemoteModels(ep.parse or mr.parse, resp.body)) do
|
||
if not seen[id] then seen[id] = true merged[#merged+1] = id end
|
||
end
|
||
end
|
||
end
|
||
if #merged == 0 then return nil, lastErr or "远端返回空目录" end
|
||
if not plugin.state.remoteModels then plugin.state.remoteModels = {} end
|
||
plugin.state.remoteModels[provider] = {
|
||
ids = merged,
|
||
fetched_at = os.time(),
|
||
}
|
||
markDirty()
|
||
return merged, nil
|
||
end
|
||
|
||
local function disabledModelsOf(provider)
|
||
if not plugin.state.modelDisabled then plugin.state.modelDisabled = {} end
|
||
local m = plugin.state.modelDisabled[provider]
|
||
if not m then m = {} plugin.state.modelDisabled[provider] = m end
|
||
return m
|
||
end
|
||
|
||
-- setModelDisabled 是**唯一**的模型黑名单写入口：写完即落盘。
|
||
-- 之所以收成一个函数：黑名单的写点曾有 5+ 处（单个开关/批量/清死模型/供应商
|
||
-- 整体开关），散着写必然漏标脏。收口后只有这里需要保证。
|
||
local function setModelDisabled(provider, modelId, disabled)
|
||
local m = disabledModelsOf(provider)
|
||
if disabled then m[modelId] = true else m[modelId] = nil end
|
||
markDirty()
|
||
end
|
||
|
||
-- 渠道积分能力表（对齐参考 CHANNEL_CREDITS）：声明各渠道有没有领取/余额。
|
||
local CHANNEL_CREDITS = {
|
||
codearts = { claim = true },
|
||
buddy = { claim = true, status = true },
|
||
lobsterai = { claim = true },
|
||
qoder = { claim = true },
|
||
trae = { claim = true },
|
||
cline = { unit = "dollars" },
|
||
loomy = { claim = true },
|
||
raccoon = {},
|
||
minimax = { claim = true, status = true },
|
||
zcode = { claim = true, unit = "tokens" },
|
||
gemini = { unit = "quota", quota = true },
|
||
}
|
||
|
||
-- ---- 账号级 source 同步 ----
|
||
-- 每个账号一条上游源：channels-<provider>-<accountId>。模型开关即改写
|
||
-- 这条源的 models 列表（remove+add 重建；内核 add_source 同名覆盖，但显式
|
||
-- 先 remove 更诚实，避免旧模型残留）。
|
||
local function accountSourceName(provider, accountId)
|
||
return "channels-" .. provider .. "-" .. accountId
|
||
end
|
||
|
||
-- syncAccountSource 把某账号的上游源与（平台模型目录 - 黑名单）对齐。
|
||
-- 无凭据（占位账号）不动源。
|
||
local function syncAccountSource(provider, accountId)
|
||
local plat = platformById(provider)
|
||
local acct = poolGet(provider, accountId)
|
||
if not plat or not acct then return end
|
||
-- 凭据可能是裸 token 或完整凭据 JSON；上游源只吃 access token。
|
||
local tok = credentialOf(acct.credentialRef)
|
||
if not tok or tok == "" then return end
|
||
local name = accountSourceName(provider, accountId)
|
||
local models = {}
|
||
local disabled = disabledModelsOf(provider)
|
||
-- 用**有效目录**（远端优先、兜底补位），不是硬编码表
|
||
for _, m in ipairs(effectiveModels(provider)) do
|
||
if not disabled[m] then
|
||
models[#models+1] = { id = m, kind = "chat", priority = 20 }
|
||
end
|
||
end
|
||
-- 重建：先 remove（容错：源可能不存在）再 add
|
||
__llmsproxy_kernel.call("remove_source", { name = name })
|
||
local r, aerr = __llmsproxy_kernel.call("add_source", {
|
||
source = {
|
||
name = name,
|
||
base_url = plat.base_url,
|
||
adapter = plat.adapter or "openai",
|
||
api_key = tok,
|
||
max_concurrent = 2,
|
||
models = models,
|
||
},
|
||
})
|
||
if aerr then logEvent("接入源失败 " .. name .. ": " .. aerr)
|
||
else logEvent("已同步源 " .. name .. "（" .. #models .. " 模型）") end
|
||
end
|
||
|
||
local function dropAccountSource(provider, accountId)
|
||
__llmsproxy_kernel.call("remove_source", { name = accountSourceName(provider, accountId) })
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 登录
|
||
-- ============================================================================
|
||
|
||
-- plugin.start_login(platform_id) 由设置页调用：创建一个登录会话。
|
||
--
|
||
-- 返回 {url=…, session=…} 给页面显示"请在自己的浏览器打开这个地址"。
|
||
-- 登录完成后用户浏览器会回到本插件（callback 流程）或本插件轮询到结果
|
||
|
||
-- ============================================================================
|
||
-- 登录会话（插件自持）与服务端浏览器栈
|
||
-- ============================================================================
|
||
|
||
-- 登录会话放 plugin.state.sessions：内核没有"登录"概念，这正是插件该自己干的
|
||
-- 事。表结构 { id, platform, flow, url, user_code, nonce, state, account,
|
||
-- created_at, expires_at }。nonce 只在 begin 响应里出现一次，存侧不外泄。
|
||
local SESSION_TTL = 900 -- 15 分钟，过期会话在读取时惰性清理
|
||
|
||
local function newToken()
|
||
-- 用 hmac 自己跟自己造一个不可猜的 id（内核给过 sha256_hex）
|
||
return sha256_hex(tostring(os.time()) .. math.random(1e12) .. (plugin.name or "channels"))
|
||
end
|
||
|
||
local function sessions()
|
||
if not plugin.state.sessions then plugin.state.sessions = {} end
|
||
return plugin.state.sessions
|
||
end
|
||
|
||
-- sweepSessions 惰性清理过期/终态会话（无后台定时器，读取时顺带做）
|
||
local function sweepSessions()
|
||
local now = os.time and os.time() or 0
|
||
for id, s in pairs(sessions()) do
|
||
if s.expires_at and s.expires_at < now then
|
||
-- 会话过期时要顺带回收它为回调起的 loopback 接收器 —— 否则用户放弃
|
||
-- 登录后那些 python 监听会一直挂着（进程泄漏，且白占端口）。
|
||
reapLoopback(id)
|
||
sessions()[id] = nil
|
||
end
|
||
end
|
||
end
|
||
|
||
-- ---- 服务端浏览器栈（VNC 兜底用）----
|
||
-- 每个会话一组进程：Xvfb + chromium + x11vnc + websockify。pid 记在
|
||
-- plugin.state.browser.pids，插件卸载或会话结束时 kill。
|
||
-- 绑定地址默认 127.0.0.1（同机操作）；远程运维可把 settings.vnc_bind 设成
|
||
-- "0.0.0.0" 并依赖 x11vnc 随机会话密码（不设密码的裸 VNC 永远不会出现）。
|
||
--
|
||
-- 为什么需要它：有些平台的登录**必须**在服务端完成 —— 回环重定向落不到用户
|
||
-- 机器上、或授权页要求浏览器内交互（扫码后确认、短信验证码）。这时只有服务端
|
||
-- 浏览器能走完，VNC 是把那个浏览器呈现给运维的唯一途径。
|
||
--
|
||
-- 登录后的取凭据不走「截图 + 人眼看」：浏览器以 --remote-debugging-port 起，
|
||
-- 完成后经 CDP 读 document.cookie / localStorage / 显式取回的 token，
|
||
-- 落到保险库。人只负责在 VNC 窗口里完成交互，机器负责把结果取出来。
|
||
|
||
local function browserStack()
|
||
if not plugin.state.browser then plugin.state.browser = { pids = {}, seq = 0 } end
|
||
return plugin.state.browser
|
||
end
|
||
|
||
-- browserDeps 探测浏览器栈的外部依赖。返回 { ok=bool, missing={...}, present={...} }。
|
||
-- 依赖是**外部系统包**（发行版装的），插件不擅自 apt/dnf 安装 —— 那需要 root 且
|
||
-- 会改动运维的机器；如实报告缺什么，由运维或部署脚本装。deploy.sh 提供安装路径。
|
||
local BROWSER_DEPS = {
|
||
{ bin = "Xvfb", pkg = "xvfb", why = "虚拟显示" },
|
||
{ bin = "x11vnc", pkg = "x11vnc", why = "VNC 服务端" },
|
||
{ bin = "websockify", pkg = "websockify", why = "VNC→WebSocket 网关" },
|
||
{ bin = "python3", pkg = "python3", why = "CDP 取凭据" },
|
||
}
|
||
local function which(bin)
|
||
local h = io.popen("command -v " .. bin .. " 2>/dev/null")
|
||
if not h then return false end
|
||
local p = h:read("*l")
|
||
h:close()
|
||
return p ~= nil and p ~= ""
|
||
end
|
||
|
||
-- reapBrowser 回收本插件拉起的整组进程。进程是插件起的，插件负责杀 ——
|
||
-- 留一个孤儿 chromium 会一直占着显示与内存，且下次 spawn 会撞端口。
|
||
local function reapBrowser()
|
||
local b = browserStack()
|
||
for _, pid in ipairs(b.pids or {}) do
|
||
os.execute("kill -9 " .. tostring(pid) .. " 2>/dev/null")
|
||
end
|
||
b.pids = {}
|
||
b.session = nil
|
||
end
|
||
|
||
local function browserDeps()
|
||
local missing, present = {}, {}
|
||
for _, d in ipairs(BROWSER_DEPS) do
|
||
if which(d.bin) then present[#present + 1] = d.bin
|
||
else missing[#missing + 1] = { bin = d.bin, pkg = d.pkg, why = d.why } end
|
||
end
|
||
-- chromium 的二进制名随发行版变化（chromium / chromium-browser / google-chrome）
|
||
local chromium = nil
|
||
for _, c in ipairs({ "chromium", "chromium-browser", "google-chrome", "google-chrome-stable" }) do
|
||
if which(c) then chromium = c break end
|
||
end
|
||
if chromium then present[#present + 1] = chromium
|
||
else missing[#missing + 1] = { bin = "chromium", pkg = "chromium", why = "浏览器" } end
|
||
-- noVNC 静态资源（websockify --web 指向它）
|
||
local novnc = nil
|
||
for _, p in ipairs({ "/usr/share/novnc", "/usr/share/webapps/novnc", "/opt/novnc" }) do
|
||
local f = io.open(p .. "/vnc.html", "r")
|
||
if f then f:close() novnc = p break end
|
||
end
|
||
if not novnc then
|
||
missing[#missing + 1] = { bin = "novnc", pkg = "novnc", why = "浏览器内嵌页面" }
|
||
end
|
||
-- CDP 需要 websocket 客户端
|
||
local pyws = false
|
||
if which("python3") then
|
||
local h = io.popen("python3 -c 'import websocket' 2>/dev/null && echo yes")
|
||
if h then local r = h:read("*l") h:close() pyws = (r == "yes") end
|
||
end
|
||
if which("python3") and not pyws then
|
||
missing[#missing + 1] = { bin = "python3-websocket", pkg = "python3-websocket", why = "CDP 取凭据（websocket-client）" } end
|
||
return {
|
||
ok = #missing == 0,
|
||
missing = missing,
|
||
present = present,
|
||
chromium = chromium,
|
||
novnc = novnc,
|
||
}
|
||
end
|
||
|
||
-- gatewayPort 问内核要本网关的监听端口。VNC 里的浏览器要回调到本插件的挂载点，
|
||
-- 端口不能硬编码（非默认部署会全错）。内核 status 里带 listen（如 "0.0.0.0:8081"）。
|
||
-- gatewayPort 求本网关的监听端口。VNC 里的浏览器要回调到本插件的挂载点，
|
||
-- 端口不能硬编码（非默认部署会全错）。
|
||
--
|
||
-- 端口由插件**自己**取得，不问内核：插件在信任模型里就是可信、有完整 OS 能力的
|
||
-- （能拉浏览器栈、能在磁盘上读写），读一下自己的 config.yaml 是它能力范围内的事。
|
||
-- 为了一个端口给内核加只读动作，既不必要，也污染了内核的「零厂商/零部署知识」边界。
|
||
-- 优先级：settings 显式覆盖 > config.yaml 的 listen > 环境变量 > 默认值。
|
||
-- buildAuthorizeUrl(plat, port, state, redirectUri, vars)：按平台 authorize 规格拼授权 URL。
|
||
--
|
||
-- 规格形如 { base = "...", params = {...}, hash = "/portal#/login" }：
|
||
-- - params 里的值支持 {port} / {redirect_uri} 占位，另由 vars 提供
|
||
-- 平台特有的占位（如 Trae 的 machine_id / device_id / trace_id）；
|
||
-- - hash 非空时把参数挂在 **hash 段**之后（LobsterAI 是 /portal#/login?…）；
|
||
-- - 值一律百分号编码（redirect_uri 含 :// 与 :，不编码会被登录页拒）。
|
||
-- 参考注释明确警告过手工拼串漏编码的坑（buildLobsteraiLoginUrl）。
|
||
local function buildAuthorizeUrl(plat, port, state, redirectUri, vars)
|
||
local a = plat.authorize or {}
|
||
local base = a.hash or a.base or plat.login_url
|
||
local parts = {}
|
||
local function add(k, v)
|
||
v = tostring(v):gsub("{port}", tostring(port))
|
||
if redirectUri and redirectUri ~= "" then
|
||
v = v:gsub("{redirect_uri}", redirectUri)
|
||
end
|
||
if type(vars) == "table" then
|
||
for vk, vv in pairs(vars) do
|
||
v = v:gsub("{" .. vk .. "}", tostring(vv))
|
||
end
|
||
end
|
||
if k == "state" and (v == "" or v == "nil") then v = state end
|
||
parts[#parts + 1] = rfc3986Escape(k) .. "=" .. rfc3986Escape(v)
|
||
end
|
||
-- 确定性的顺序：排序键名，保证同一会话每次拼出的 URL 一致（便于对账/复现）
|
||
local keys = {}
|
||
for k in pairs(a.params or {}) do keys[#keys + 1] = k end
|
||
table.sort(keys)
|
||
for _, k in ipairs(keys) do add(k, a.params[k]) end
|
||
-- state 始终补上（除非 params 里已显式给了）
|
||
if not (a.params and a.params.state) then add("state", state) end
|
||
return base .. "?" .. table.concat(parts, "&")
|
||
end
|
||
|
||
local function gatewayPort()
|
||
-- ① settings：运维可显式指定（前置代理 / 反代场景，对外端口与 listen 不同）
|
||
local s = plugin.state.settings and plugin.state.settings.gateway_port
|
||
if tonumber(s) then return tonumber(s) end
|
||
-- ② 配置文件：插件与内核同机，直接读自己的配置
|
||
for _, path in ipairs({
|
||
"/etc/llmsproxy/config.yaml",
|
||
"/usr/local/etc/llmsproxy/config.yaml",
|
||
}) do
|
||
local f = io.open(path, "r")
|
||
if f then
|
||
local listen = f:read("*a")
|
||
f:close()
|
||
if listen then
|
||
local addr = listen:match("\nlisten:%s*([^\n]%S*)") or listen:match("^listen:%s*([^\n]%S*)")
|
||
if addr then
|
||
local p = addr:match(":(%d+)")
|
||
if p then return tonumber(p) end
|
||
end
|
||
end
|
||
end
|
||
end
|
||
-- ③ 实听端口：从内核自己的监听 socket 反查（配置文件缺失/被换时兜底）
|
||
do
|
||
local h = io.popen("ss -ltnp 2>/dev/null | grep 'pid=' | grep -o ':[0-9]*' | head -1")
|
||
if h then
|
||
local line = h:read("*l")
|
||
h:close()
|
||
local p = line and line:match(":(%d+)")
|
||
if p then return tonumber(p) end
|
||
end
|
||
end
|
||
return 8081
|
||
end
|
||
|
||
-- waitPort 等端口就绪（就绪探针），避免「进程起来了但还不能连」。
|
||
-- 返回 true/false，最多等 timeout_ms。
|
||
local function waitPort(host, port, timeoutMs)
|
||
local deadline = (os.time and os.time() or 0) * 1000 + timeoutMs
|
||
while true do
|
||
local h = io.popen(("bash -c 'exec 3<>/dev/tcp/%s/%d' 2>/dev/null && echo ok"):format(host, port))
|
||
local r = h and h:read("*l")
|
||
if h then h:close() end
|
||
if r == "ok" then return true end
|
||
local now = (os.time and os.time() or 0) * 1000
|
||
if now >= deadline then return false end
|
||
os.execute("sleep 0.3")
|
||
end
|
||
end
|
||
|
||
-- CDP 取凭据的 Python 桥。argv: <script> <cdp_port> <expr_file>
|
||
-- 打印一行 JSON: {"ok":true,"value":<...>} 或 {"ok":false,"error":"..."}
|
||
-- 用文件传表达式，避免 shell 引号地狱（表达式里常有引号/换行）。
|
||
local CDP_PY = [[
|
||
import json, sys, urllib.request
|
||
try:
|
||
import websocket
|
||
except Exception as e:
|
||
print(json.dumps({"ok": False, "error": "websocket-client 未安装: %s" % e}))
|
||
sys.exit(0)
|
||
|
||
port = int(sys.argv[1])
|
||
with open(sys.argv[2]) as f:
|
||
expr = f.read()
|
||
|
||
def http(path):
|
||
with urllib.request.urlopen("http://127.0.0.1:%d%s" % (port, path), timeout=10) as r:
|
||
return json.load(r)
|
||
|
||
try:
|
||
targets = http("/json/list")
|
||
except Exception as e:
|
||
print(json.dumps({"ok": False, "error": "CDP 不可达: %s" % e})); sys.exit(0)
|
||
|
||
page = None
|
||
for t in targets:
|
||
if t.get("type") == "page" and t.get("webSocketDebuggerUrl"):
|
||
page = t; break
|
||
if page is None:
|
||
print(json.dumps({"ok": False, "error": "没有可用的 page target"})); sys.exit(0)
|
||
|
||
try:
|
||
ws = websocket.create_connection(page["webSocketDebuggerUrl"], timeout=20)
|
||
ws.send(json.dumps({"id": 1, "method": "Runtime.evaluate",
|
||
"params": {"expression": expr, "returnByValue": True,
|
||
"awaitPromise": True}}))
|
||
while True:
|
||
msg = json.loads(ws.recv())
|
||
if msg.get("id") == 1:
|
||
break
|
||
ws.close()
|
||
except Exception as e:
|
||
print(json.dumps({"ok": False, "error": "CDP 求值失败: %s" % e})); sys.exit(0)
|
||
|
||
res = msg.get("result", {})
|
||
if "exceptionDetails" in res:
|
||
print(json.dumps({"ok": False, "error": res["exceptionDetails"].get("text", "JS 异常")}))
|
||
sys.exit(0)
|
||
print(json.dumps({"ok": True, "value": res.get("result", {}).get("value")}))
|
||
]]
|
||
|
||
local function cdpScriptPath()
|
||
local p = "/tmp/llmsproxy-cdp-eval.py"
|
||
local f = io.open(p, "r")
|
||
if f then f:close() return p end
|
||
local w = io.open(p, "w")
|
||
if not w then return nil end
|
||
w:write(CDP_PY)
|
||
w:close()
|
||
return p
|
||
end
|
||
|
||
-- cdpEval 在服务端浏览器的当前页上求值一个 JS 表达式。
|
||
-- 返回 (value, err)。value 是 JS 返回值（经 returnByValue 序列化）。
|
||
local function cdpEval(cdpPort, expr)
|
||
local script = cdpScriptPath()
|
||
if not script then return nil, "无法写入 CDP 脚本" end
|
||
local exprFile = ("/tmp/llmsproxy-cdp-expr-%d.js"):format(cdpPort)
|
||
local w = io.open(exprFile, "w")
|
||
if not w then return nil, "无法写入表达式文件" end
|
||
w:write(expr)
|
||
w:close()
|
||
local h = io.popen(("python3 %s %d %s 2>/dev/null"):format(script, cdpPort, exprFile))
|
||
if not h then os.remove(exprFile) return nil, "python3 执行失败" end
|
||
local out = h:read("*a")
|
||
h:close()
|
||
os.remove(exprFile)
|
||
if not out or out == "" then return nil, "CDP 无输出" end
|
||
local ok, rec = pcall(json.decode, out)
|
||
if not ok or type(rec) ~= "table" then return nil, "CDP 输出无法解析: " .. tostring(out):sub(1, 200) end
|
||
if rec.ok ~= true then return nil, tostring(rec.error or "CDP 失败") end
|
||
return rec.value, nil
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- loopback 回调接收器（平台要求 redirect_uri 落在本机精确路径时用）
|
||
-- ============================================================================
|
||
--
|
||
-- 为什么必需：各回调平台的 redirect_uri 都是**回环地址**（127.0.0.1 / localhost）
|
||
-- 且路径是各自注册值（有道 /auth/callback、Trae /authorize、Gemini /oauth-callback），
|
||
-- 而本插件的挂载点在 `/api/plugins/http/…`；更关键的是**远程用户机器上的
|
||
-- 127.0.0.1 不是本网关** —— 那样重定向根本打不到这里。
|
||
--
|
||
-- 做法：插件（可信、有 OS 能力）在本机起一个极小的 HTTP 监听，路径前缀就是该
|
||
-- 平台的注册路径。**双栈绑回环**（::1 与 127.0.0.1 同一端口）：参考注释点明
|
||
-- 「浏览器常把 localhost 解析成 IPv6」，而 Gemini 注册的就是 http://localhost:…
|
||
-- —— 只绑 IPv4 会让那条回调连不上（但**绝不**绑 :: 对外暴露）。
|
||
-- 它把回调 query 原子写进**文件**（不拼 shell，避免引号/特殊字符注入 ——
|
||
-- 与 CDP 桥用文件传表达式同一理由），然后给浏览器一个可关闭的页面。
|
||
--
|
||
-- 校验规则按平台形态分两类（不能一刀切）：
|
||
-- * Trae：回调把 token 直接放 query（refreshToken/userJwt/…），**不带 state**
|
||
-- （参考 parseTraeCallback 从不读 state），故对 /authorize 不要求 state。
|
||
-- * Gemini / 有道：标准授权码回调，state 必须匹配，否则 400（防伪造回调）。
|
||
--
|
||
-- 真正入账前的 state 终校在 poll_login（读文件后再次比对 nonce）。
|
||
--
|
||
-- 返回 (redirect_url, nil) 或 (nil, err)。进程 pid 记入 plugin.state.loopbacks，
|
||
-- 会话结束时由 reapLoopback 回收。
|
||
local LOOPBACK_PY = [[
|
||
import sys, json, os, socket, tempfile, threading
|
||
from http.server import BaseHTTPRequestHandler, HTTPServer
|
||
from urllib.parse import urlparse, parse_qs
|
||
prefix, out_path, want_state, port_path = sys.argv[1], sys.argv[2], sys.argv[3], sys.argv[4]
|
||
# Trae 的回调不带 state（它把 token 放在 query 里，靠路径区分）；其余平台必须带。
|
||
require_state = (prefix != "/authorize")
|
||
class H(BaseHTTPRequestHandler):
|
||
def log_message(self, *a):
|
||
pass
|
||
def do_GET(self):
|
||
u = urlparse(self.path)
|
||
if not u.path.startswith(prefix):
|
||
self.send_response(404); self.end_headers(); self.wfile.write(b"Not found"); return
|
||
q = parse_qs(u.query)
|
||
state = (q.get("state") or [""])[0]
|
||
if require_state and (not state or (want_state and state != want_state)):
|
||
# state 缺失/不匹配 → 不是本次登录发起的（或伪造），直接拒（对齐参考）。
|
||
self.send_response(400); self.send_header("Content-Type","text/plain; charset=utf-8")
|
||
self.end_headers(); self.wfile.write("\u767b\u5f55\u56de\u8c03\u53c2\u6570\u65e0\u6548".encode()); return
|
||
# 把整个回调 query 原样转成 JSON（含 code/authCode 与 Trae 的
|
||
# refreshToken/userJwt/userInfo 等），由 Lua 侧按平台形态取用。
|
||
payload = {}
|
||
for k, v in q.items():
|
||
payload[k] = v[0] if v else ""
|
||
code = payload.get("code") or payload.get("authCode") or ""
|
||
if require_state and not code:
|
||
self.send_response(400); self.send_header("Content-Type","text/plain; charset=utf-8")
|
||
self.end_headers(); self.wfile.write("\u767b\u5f55\u56de\u8c03\u7f3a\u5c11\u6388\u6743\u7801".encode()); return
|
||
if not payload:
|
||
self.send_response(400); self.end_headers(); self.wfile.write(b"No params"); return
|
||
# 不经 shell 拼串，直接写成 JSON 文件（避免引号/特殊字符注入）。
|
||
d = os.path.dirname(out_path)
|
||
fd, tmp = tempfile.mkstemp(dir=d)
|
||
with os.fdopen(fd, "w") as f:
|
||
json.dump(payload, f)
|
||
os.replace(tmp, out_path)
|
||
self.send_response(200); self.send_header("Content-Type","text/html; charset=utf-8")
|
||
self.end_headers()
|
||
self.wfile.write("<html><body><h2>\u767b\u5f55\u6210\u529f\uff0c\u53ef\u4ee5\u5173\u95ed\u6b64\u7a97\u53e3\u4e86</h2></body></html>".encode())
|
||
# 双栈：两个 HTTP 实例都要主动停（否则非当前那个会挂着不退）。
|
||
def _stop():
|
||
for s in SERVERS:
|
||
try: s.shutdown()
|
||
except Exception: pass
|
||
threading.Thread(target=_stop, daemon=True).start()
|
||
|
||
SERVERS = []
|
||
# 为何要双栈：参考注释点明「浏览器常把 localhost 解析成 IPv6」——
|
||
# 只绑 127.0.0.1 时，Gemini 的 http://localhost:…/oauth-callback 会连不上。
|
||
# 不能改成绑 ::（那等于对外暴露）；只绑回环地址的两种家族。
|
||
# 注意：address_family 必须在**构造前**就在类上定好（socketserver 建 socket
|
||
# 时读的就是这个类属性）；构造后再赋值无效 —— 那会让 IPv6 分支静默失败。
|
||
class V6Server(HTTPServer):
|
||
address_family = socket.AF_INET6
|
||
|
||
port = 0
|
||
try:
|
||
v6 = V6Server(("::1", 0), H)
|
||
port = v6.server_address[1]
|
||
SERVERS.append(v6)
|
||
except Exception:
|
||
pass
|
||
try:
|
||
v4 = HTTPServer(("127.0.0.1", port), H)
|
||
if port == 0:
|
||
port = v4.server_address[1]
|
||
SERVERS.append(v4)
|
||
except Exception:
|
||
pass
|
||
if not SERVERS:
|
||
sys.exit(3)
|
||
# 把实际选中的端口写回文件：调用方读它拼 redirect_uri（bind 0 时端口只有 bind 后才知道）。
|
||
with open(port_path, "w") as f:
|
||
f.write(str(port))
|
||
for s in SERVERS:
|
||
threading.Thread(target=s.serve_forever, daemon=True).start()
|
||
threading.Event().wait()
|
||
]]
|
||
|
||
local function loopbackScriptPath()
|
||
local p = "/tmp/llmsproxy-loopback.py"
|
||
local w = io.open(p, "w")
|
||
if not w then return nil end
|
||
w:write(LOOPBACK_PY)
|
||
w:close()
|
||
return p
|
||
end
|
||
|
||
-- reapLoopback 杀掉某会话的接收器进程并清文件（无需常驻，用完即收）。
|
||
-- 必须定义在 loopbackReceiver **之前**：Lua 的 local 作用域只覆盖其后的代码，
|
||
-- 反过来写会让 loopbackReceiver 里的调用拿到 nil（真实踩过的坑）。
|
||
local function reapLoopback(sessionId)
|
||
local l = plugin.state.loopbacks and plugin.state.loopbacks[sessionId]
|
||
if not l then return end
|
||
if l.pid and l.pid ~= "" then
|
||
os.execute("kill -9 " .. tostring(l.pid) .. " 2>/dev/null")
|
||
end
|
||
if l.file then os.remove(l.file) end
|
||
if l.port_file then os.remove(l.port_file) end
|
||
plugin.state.loopbacks[sessionId] = nil
|
||
end
|
||
|
||
-- loopbackReceiver(session_id, cb_path)：起接收器，返回该会话的 redirect_uri。
|
||
--
|
||
-- cb_path 必须与平台注册值**逐字一致**（改了就是 redirect_uri_mismatch）：
|
||
-- 有道 /auth/callback（参考注释点名「精确路径」）、
|
||
-- Trae /authorize、Gemini /oauth-callback（参考 GEMINI_CALLBACK_PATH）。
|
||
local function loopbackReceiver(sessionId, cbPath)
|
||
cbPath = cbPath or "/auth/callback"
|
||
local script = loopbackScriptPath()
|
||
if not script then return nil, "无法写入 loopback 脚本" end
|
||
local dir = storeDir()
|
||
local outFile = dir .. "/callback-" .. sessionId .. ".json"
|
||
local portFile = dir .. "/callback-" .. sessionId .. ".port"
|
||
os.remove(outFile)
|
||
os.remove(portFile)
|
||
local sess = sessions()[sessionId]
|
||
local wantState = (sess and sess.nonce) or ""
|
||
-- 端口由 python bind(0) 自己选，绑 127.0.0.1（不对外暴露监听面）；
|
||
-- 它把实际端口写回 portFile，我们轮询读取后拼 redirect_uri。
|
||
local cmd = ("python3 %s %s %s %s %s >/tmp/llmsproxy-loopback-%s.log 2>&1 & echo $!"):format(
|
||
script, cbPath, outFile, wantState, portFile, sessionId)
|
||
local h = io.popen(cmd)
|
||
local pid = h and h:read("*l")
|
||
if h then h:close() end
|
||
if not pid or pid == "" then return nil, "loopback 启动失败（python3 不可用？）" end
|
||
if not plugin.state.loopbacks then plugin.state.loopbacks = {} end
|
||
plugin.state.loopbacks[sessionId] = { pid = pid, file = outFile, port_file = portFile }
|
||
-- 等端口文件出现（就绪探针，不用 sleep 拍脑袋）
|
||
local deadline = (os.time and os.time() or 0) + 10
|
||
local port = nil
|
||
while true do
|
||
local f = io.open(portFile, "r")
|
||
if f then
|
||
local v = f:read("*l")
|
||
f:close()
|
||
port = tonumber(v)
|
||
if port then break end
|
||
end
|
||
if (os.time and os.time() or 0) >= deadline then
|
||
reapLoopback(sessionId)
|
||
return nil, "loopback 未就绪（未取得端口）"
|
||
end
|
||
os.execute("sleep 0.2")
|
||
end
|
||
-- 主机用 127.0.0.1（不是 localhost，除非平台注册值就是 localhost）；
|
||
-- 路径按平台注册值一字不差。
|
||
local host = (sess and sess.callback_host) or "127.0.0.1"
|
||
return "http://" .. host .. ":" .. tostring(port) .. cbPath, nil
|
||
end
|
||
|
||
-- readLoopbackCallback(session_id)：读接收器写下的回调 query。
|
||
-- 返回 (payload_table, nil) 或 (nil, nil)。未到/文件不存在返回 nil,nil ——
|
||
-- 调用方应继续保持 pending（不能把「还没回调」当成「失败」）。
|
||
local function readLoopbackCallback(sessionId)
|
||
local l = plugin.state.loopbacks and plugin.state.loopbacks[sessionId]
|
||
local f = l and l.file and io.open(l.file, "r")
|
||
if not f then return nil, nil end
|
||
local body = f:read("*a")
|
||
f:close()
|
||
local ok, rec = pcall(json.decode, body or "")
|
||
if not ok or type(rec) ~= "table" then return nil, nil end
|
||
return rec, nil
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- spawnBrowser 拉起一组服务端浏览器。返回
|
||
-- { view_url, password, cdp_port, display, vnc, ws } 或 nil, err。
|
||
--
|
||
-- 与早期实现的差别（都是真实踩过的坑）：
|
||
-- 1. **就绪探针**：不再 sleep 2 拍脑袋，各端口逐个等（X 起来 → 浏览器起 →
|
||
-- VNC 起 → websockify 起），否则 view_url 先于服务可用，iframe 白屏。
|
||
-- 2. **CDP 端口**：浏览器带 --remote-debugging-port，登录完成后可读凭据
|
||
-- （见 cdpEval / vncCollect），而不是只能人眼看屏幕。
|
||
-- 3. **网关端口来自内核**：回调地址拼的是本实例真实端口，不硬编码 8081。
|
||
-- 4. **依赖预检**：缺依赖直接给出清单（谁、干什么用、装什么包），
|
||
-- 而不是一个含糊的"进程启动失败"。
|
||
-- spawnBrowser(start_url)：拉起服务端浏览器栈（Xvfb + chromium + x11vnc +
|
||
-- websockify），返回 VNC 视图地址与 CDP 端口。
|
||
-- start_url 已是**拼装完整的授权页 URL**（redirect_uri/state 由调用方按平台
|
||
-- 规格填好），此处不再改写。
|
||
local function spawnBrowser(start_url)
|
||
local b = browserStack()
|
||
if b.session then return nil, "已有浏览器会话在跑，请先停止" end
|
||
local deps = browserDeps()
|
||
if not deps.ok then
|
||
local miss = {}
|
||
for _, m in ipairs(deps.missing) do
|
||
miss[#miss + 1] = ("%s(%s，装 %s)"):format(m.bin, m.why, m.pkg)
|
||
end
|
||
return nil, "缺少浏览器栈依赖: " .. table.concat(miss, ", ")
|
||
end
|
||
b.seq = b.seq + 1
|
||
local seq = b.seq
|
||
-- display / 端口取号：**探测空闲**，不能按 seq 取模。
|
||
-- -- 真实缺陷：原先写 `90 + (seq % 10)`，而 Xvfb 的锁文件（/tmp/.X<n>-lock）在
|
||
-- 进程被强杀时会残留。重启后 seq 从头开始 → 又选中同一个号 → Xvfb 直接
|
||
-- `Fatal: Server is already active for display 91` 退出，VNC 兜底永远起不来，
|
||
-- 而报错只显示"Xvfb 未就绪"，看不出是被残留锁挡住。
|
||
-- 现在从 91 起找第一个既无锁文件、也无 socket 的号；端口同理探测空闲。
|
||
local function pickFree(start, isFree)
|
||
for n = start, start + 40 do
|
||
if isFree(n) then return n end
|
||
end
|
||
return start
|
||
end
|
||
-- 判存在必须用 `[ -e ]` 而不是 io.open：X socket 是 socket 文件，
|
||
-- io.open 对它返回 nil（打不开）→ 探测会误判"空闲"→ 又选中被残留 socket
|
||
-- 占住的号 → Xvfb `Cannot establish any listening sockets` 退出。
|
||
-- 这个坑真实踩过：残留 X91 socket 让显示器探测完全失效。
|
||
local function pathExists(path)
|
||
local ok = os.execute('[ -e "' .. path .. '" ] 2>/dev/null')
|
||
-- Lua 5.1 返回数字（0=成功），5.2+ 返回 true/nil
|
||
return ok == true or ok == 0
|
||
end
|
||
local disp = pickFree(91, function(n)
|
||
return not pathExists("/tmp/.X" .. n .. "-lock")
|
||
and not pathExists("/tmp/.X11-unix/X" .. n)
|
||
end)
|
||
local function portFree(p)
|
||
-- 用 /proc/net/tcp + tcp6 查是否有 LISTEN（十六进制端口）
|
||
for _, f in ipairs({ "/proc/net/tcp", "/proc/net/tcp6" }) do
|
||
local h = io.open(f, "r")
|
||
if h then
|
||
local hex = ("%04X"):format(p)
|
||
for line in h:lines() do
|
||
local lp = line:match("^%s*%d+:%s*[0-9A-F]+:([0-9A-F]+)")
|
||
if lp == hex then h:close() return false end
|
||
end
|
||
h:close()
|
||
end
|
||
end
|
||
return true
|
||
end
|
||
local vport = pickFree(59100, portFree)
|
||
local wport = pickFree(60100, portFree)
|
||
local cdpPort = pickFree(61100, portFree)
|
||
local bind = (plugin.state.settings and plugin.state.settings.vnc_bind) or "127.0.0.1"
|
||
-- 会话密码：bind 到非回环时是唯一的防线，随机生成、只在响应里给一次
|
||
local pass = sha256_hex(newToken()):sub(1, 16)
|
||
local gwPort = gatewayPort()
|
||
-- 不再改写 start_url 里的端口/回调地址：`{port}` 占位已在 buildAuthorizeUrl
|
||
-- 拼装时换成 gatewayPort()，而各平台的回调路径**彼此不同**（Trae 用
|
||
-- auth_callback_url 指本插件挂载点、LobsterAI 用 /auth/callback 指 loopback
|
||
-- 接收器）。此前这里用 gsub 把 "redirect_uri=127.0.0.1:<port>" 一律改写成
|
||
-- /api/plugins/http/channels/callback —— 一旦命中就会把需要别的路径的平台
|
||
-- （尤其有道，其 login 段还被百分号编码）改错。现为死代码且只可能致害，遂删。
|
||
-- 每步起一个进程并等它的端口就绪（X 用 socket 探，别的用 TCP）。
|
||
local pids = {}
|
||
local function spawn(name, cmd, host, port, timeoutMs)
|
||
local h = io.popen(cmd)
|
||
local pid = h and h:read("*l")
|
||
if h then h:close() end
|
||
if not pid or pid == "" then
|
||
return false, name .. " 启动失败（cmd=" .. tostring(cmd):sub(1,80) .. "）"
|
||
end
|
||
pids[#pids + 1] = pid
|
||
-- 立刻回写到 plugin.state，**不能只在函数末尾赋值**：
|
||
-- 任何一步中途失败都要 reapBrowser()，而它读的是 b.pids。若此时 b.pids 还是
|
||
-- 旧值（空），已经起来的进程就不会被杀 → 孤儿 Xvfb/chromium 常驻。
|
||
-- 真实踩过：4 个失败的 VNC 会话留下 4 个 orphan Xvfb。
|
||
b.pids = pids
|
||
if port and port > 0 then
|
||
if not waitPort(host or "127.0.0.1", port, timeoutMs or 8000) then
|
||
return false, name .. " 端口未就绪（:" .. port .. "）"
|
||
end
|
||
end
|
||
return true, pid
|
||
end
|
||
|
||
local chromium = deps.chromium
|
||
local novnc = deps.novnc
|
||
local steps = {
|
||
{ "Xvfb", ("Xvfb :%d -screen 0 1280x800x24 -nolisten tcp >/tmp/llmsproxy-xvfb-%d.log 2>&1 & echo $!"):format(disp, seq), nil, 0, 0 },
|
||
{ "chromium", ("%s --no-sandbox --disable-dev-shm-usage --user-data-dir=/tmp/llmsproxy-ch-%d "
|
||
.. "--no-first-run --disable-gpu --remote-debugging-port=%d --remote-allow-origins=* "
|
||
.. "--window-size=1280,800 --display=:%d '%s' >/tmp/llmsproxy-chrome-%d.log 2>&1 & echo $!"):format(
|
||
chromium, seq, cdpPort, disp, url, seq), "127.0.0.1", cdpPort, 15000 },
|
||
{ "x11vnc", ("x11vnc -display :%d -rfbport %d -%s -passwd '%s' -forever -shared -quiet "
|
||
.. ">/tmp/llmsproxy-x11vnc-%d.log 2>&1 & echo $!"):format(
|
||
disp, vport, bind == "127.0.0.1" and "localhost" or "listen", pass, seq), "127.0.0.1", vport, 8000 },
|
||
{ "websockify", ("websockify --web %s %s:%d 127.0.0.1:%d >/tmp/llmsproxy-ws-%d.log 2>&1 & echo $!"):format(
|
||
novnc, bind, wport, vport, seq), bind, wport, 8000 },
|
||
}
|
||
-- ① 先起 Xvfb（其余三步依赖 X display）
|
||
local xvfbStep = steps[1]
|
||
local xok, xerr = spawn(xvfbStep[1], xvfbStep[2], nil, 0, 0)
|
||
if not xok then
|
||
reapBrowser()
|
||
return nil, xerr
|
||
end
|
||
-- X 的 socket 在 /tmp/.X11-unix/X<n>，等它出现再起浏览器
|
||
local unixSock = ("/tmp/.X11-unix/X%d"):format(disp)
|
||
local xdeadline = (os.time and os.time() or 0) + 10
|
||
while true do
|
||
-- 同 pathExists 的理由：X socket 是 socket 文件，io.open 打不开，
|
||
-- 用它判"就绪"会永远等不到（这个坑在上面选号处也踩过一次）。
|
||
if pathExists(unixSock) then break end
|
||
if (os.time and os.time() or 0) >= xdeadline then
|
||
reapBrowser()
|
||
return nil, "Xvfb 未就绪（" .. unixSock .. " 未出现）"
|
||
end
|
||
os.execute("sleep 0.3")
|
||
end
|
||
-- ② 起浏览器/VNC/websockify（三步都有 TCP 端口可探）
|
||
for i = 2, #steps do
|
||
local st = steps[i]
|
||
local ok, err = spawn(st[1], st[2], st[3], st[4], st[5])
|
||
if not ok then
|
||
reapBrowser()
|
||
return nil, err
|
||
end
|
||
end
|
||
|
||
b.pids = pids
|
||
b.session = { display = disp, vnc = vport, ws = wport, cdp = cdpPort, pass = pass, seq = seq }
|
||
local host = (plugin.state.settings and plugin.state.settings.vnc_host) or "127.0.0.1"
|
||
return {
|
||
view_url = ("http://%s:%d/vnc.html?autoconnect=1&host=%s&port=%d&password=%s"):format(
|
||
host, wport, host, wport, pass),
|
||
password = pass,
|
||
cdp_port = cdpPort,
|
||
display = disp,
|
||
}
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 登录流程：优先级阶梯（① 本机浏览器 → ② 自动化 → ③ VNC 兜底）
|
||
-- ============================================================================
|
||
|
||
-- start_login 按优先级阶梯响应：
|
||
-- ① 本机浏览器：直接返回登录 URL（绝大多数场景到此为止 —— 平台重定向打在
|
||
-- 用户自己的机器上，插件轮询/收回调拿凭据）
|
||
-- ② 自动化：link-poll/callback 流程本身就是自动的（轮询 + nonce 回调），
|
||
-- 无需用户之外的动作
|
||
-- ③ VNC 兜底：仅 flow == "vnc" 且 ①② 无法完成的平台（无浏览器系统、
|
||
-- 注意回环重定向必须落在服务端）。此时插件自己拉起服务端浏览器栈。
|
||
-- ③ VNC 兜底：仅 flow == "vnc" 且 ①② 无法完成的平台（无浏览器系统、
|
||
-- 注意回环重定向必须落在服务端）。此时插件自己拉起服务端浏览器栈。
|
||
--
|
||
-- 有道 LobsterAI：portal 授权页要求 redirect_uri 是
|
||
-- http://127.0.0.1:{port}/auth/callback（**精确路径**，参考注释点名）。
|
||
-- 远程用户机器上的 127.0.0.1 **不是本网关** —— portal 重定向打不到本插件的
|
||
-- /api/plugins/http/... 挂载点。故插件（可信、有 OS 能力）在本机起一个
|
||
-- 轻量的 loopback 接收器，portal 重定向落到它的本地端口；它把 authCode/state
|
||
-- 写进一个文件，poll_login 读该文件完成交换。这样远程用户在服务端浏览器（VNC）
|
||
-- 里完成交互后，portal 直接重定向到该本机端口，无需远程浏览器与网关同机。
|
||
|
||
local function initLoginSession(plat, args, now)
|
||
local sess = {
|
||
id = newToken():sub(1, 24),
|
||
platform = plat.id,
|
||
flow = plat.flow,
|
||
url = plat.login_url,
|
||
nonce = newToken():sub(1, 32),
|
||
state = "pending",
|
||
created_at = now,
|
||
expires_at = now + SESSION_TTL,
|
||
}
|
||
if plat.id == "lobsterai" then
|
||
local seed = newToken()
|
||
sess.install_uuid = seed:sub(1, 8) .. "-" .. seed:sub(9, 12) .. "-4"
|
||
.. seed:sub(14, 16) .. "-8" .. seed:sub(18, 20) .. "-" .. seed:sub(21, 32)
|
||
sess.first_keyfrom = tostring(now * 1000)
|
||
elseif plat.id == "trae" then
|
||
-- 设备身份：参考生成两个 **hex32**（照 login.sh 的 `openssl rand -hex 16`），
|
||
-- 并在登录 URL 里下发。凭据里也要留一份（签到 X-Device-Id 用），
|
||
-- 且**每账号必须不同** —— 同一天两账号共用会被「该设备已签到」拦。
|
||
-- 此前只发 5 个参数、完全没造这两个值，登录页就停在「授权中」不回来。
|
||
sess.machine_id = newToken():sub(1, 32)
|
||
sess.device_id = newToken():sub(33, 64)
|
||
local joined = sess.machine_id .. sess.device_id
|
||
sess.login_trace_id = #joined >= 16 and joined:sub(-16) or joined
|
||
end
|
||
sessions()[sess.id] = sess
|
||
sess.account_id = args and args.account_id
|
||
return sess
|
||
end
|
||
|
||
function plugin.start_login(req)
|
||
local args = bodyOf(req)
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then
|
||
return { status = 400, json = { error = "未知平台: " .. tostring(args and args.platform) } }
|
||
end
|
||
sweepSessions()
|
||
local now = os.time and os.time() or 0
|
||
local sess = initLoginSession(plat, args, now)
|
||
logEvent("开始登录 " .. plat.name .. " (" .. plat.flow .. ")")
|
||
|
||
-- 响应里只带一次 nonce（回调校验要用），存侧不回显
|
||
local out = {
|
||
session = { id = sess.id, platform = sess.platform, flow = sess.flow,
|
||
state = sess.state, nonce = sess.nonce, expires_at = sess.expires_at },
|
||
platform = plat.id,
|
||
}
|
||
if plat.id == "lobsterai" or plat.id == "trae" or plat.id == "gemini" then
|
||
-- 这三个平台的 redirect_uri 都是**回环地址**（127.0.0.1 / localhost），
|
||
-- 且路径各自是注册值：有道 /auth/callback、Trae /authorize、
|
||
-- Gemini /oauth-callback。回环地址由「打开授权页的那台机器」解析，而
|
||
-- 服务端浏览器就在本机 → 重定向落本机 → 插件自己的接收器能接住它。
|
||
-- 远程用户在自己电脑上打开则永远接不住（这正是 callback 流在服务器
|
||
-- 部署下必须走服务端浏览器的原因）。
|
||
local cbPath = (plat.authorize and plat.authorize.callback_path)
|
||
or (plat.id == "gemini" and "/oauth-callback")
|
||
or (plat.id == "trae" and "/authorize") or "/auth/callback"
|
||
-- Gemini 注册的 redirect_uri 主机是 **localhost**（不是 127.0.0.1），
|
||
-- 参考注释明确点名；两者在多数机器上等价，但必须与注册值逐字一致。
|
||
if plat.id == "gemini" then sess.callback_host = "localhost" end
|
||
local cb_url, cb_err = loopbackReceiver(sess.id, cbPath)
|
||
if cb_err then
|
||
sess.state = "failed"
|
||
out.error = "无法启动回调接收器: " .. cb_err
|
||
return { status = 200, json = out }
|
||
end
|
||
sess.redirect_uri = cb_url
|
||
out.redirect_uri = cb_url
|
||
end
|
||
if plat.flow == "manual" then
|
||
-- 无法自动化的登录（WASM/captcha/扫码）：给明确说明而不是假装成功。
|
||
sess.state = "failed"
|
||
sess.message = plat.manual_hint or "该平台不支持自动登录"
|
||
out.manual_hint = sess.message
|
||
out.url = plat.login_url
|
||
logEvent("手动流程 " .. plat.id)
|
||
return { status = 200, json = out }
|
||
elseif plat.flow == "state-poll" then
|
||
-- Buddy：先拿 state + authUrl。页面给 authUrl，轮询 token 每推进一步。
|
||
local resp, err = __llmsproxy_http({
|
||
url = plat.state.state_url,
|
||
method = "POST",
|
||
headers = { ["Accept"] = "application/json", ["Content-Type"] = "application/json" },
|
||
body = "{\"platform\":\"ide\"}",
|
||
})
|
||
if err or resp.status ~= 200 then
|
||
sess.state = "failed"
|
||
out.error = "auth/state 失败: " .. (err or ("HTTP " .. tostring(resp.status)))
|
||
return { status = 200, json = out }
|
||
end
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if not ok or type(rec) ~= "table" or type(rec.data) ~= "table"
|
||
or not rec.data.state or rec.data.state == "" then
|
||
sess.state = "failed"
|
||
out.error = "auth/state 响应缺少 state 字段"
|
||
return { status = 200, json = out }
|
||
end
|
||
sess.state_token = rec.data.state
|
||
out.url = rec.data.authUrl or plat.login_url
|
||
logEvent("state 已申请 " .. plat.id)
|
||
elseif plat.flow == "vnc" then
|
||
-- ③ 兜底路径：服务端浏览器。重定向打在服务端回环上，回调命中本插件的挂载点。
|
||
local bs, berr = spawnBrowser(string.format(plat.login_url, 0))
|
||
if berr then
|
||
out.browser_error = berr
|
||
out.hint = "服务端浏览器不可用；运行 channels/deps/status 看缺什么依赖"
|
||
logEvent("服务端浏览器启动失败: " .. berr)
|
||
else
|
||
out.view_url = bs.view_url
|
||
out.session.cdp_port = bs.cdp_port
|
||
sess.cdp_port = bs.cdp_port
|
||
-- 登录页需要从服务端浏览器完成；用户交互后由 collect_credentials 取凭据
|
||
sess.collect_expr = plat.collect_expr
|
||
logEvent("服务端浏览器已就绪 " .. plat.id .. " (CDP :" .. tostring(bs.cdp_port) .. ")")
|
||
end
|
||
elseif plat.flow == "qr-poll" then
|
||
-- 自带二维码的扫码登录（Raccoon）：code 由**本地随机生成**，服务端接受
|
||
-- 任意自造 code 并进入 pending（参考注释实测）。二维码图交给前端渲染。
|
||
local q = plat.qr
|
||
local code = tostring(sha256_hex(tostring(os.time and os.time() or 0) .. tostring(math.random(1e12)))):sub(1, 32)
|
||
sess.qr_code = code
|
||
out.qr_url = q.api_base .. q.login_page .. "?code=" .. code
|
||
.. "&appname=" .. rfc3986Escape(q.app_name)
|
||
out.url = out.qr_url
|
||
out.session.interval = q.interval or 2
|
||
logEvent("二维码已生成 " .. plat.id)
|
||
elseif plat.flow == "wechat-poll" then
|
||
-- 微信扫码：取 uuid → 把二维码给前端渲染 → 长轮询等扫码确认。
|
||
-- uuid 从授权页 HTML 里抽（参考 extractLoomyWechatUuid 的两条正则兜底）。
|
||
local w = plat.wechat
|
||
local authUrl = w.auth_url:gsub("{state}", sess.nonce)
|
||
local resp, err = __llmsproxy_http({
|
||
url = authUrl, method = "GET",
|
||
headers = { ["Accept"] = "text/html", ["User-Agent"] = w.user_agent,
|
||
["Referer"] = "https://open.weixin.qq.com/" },
|
||
})
|
||
if err or not resp or resp.status ~= 200 then
|
||
sess.state = "failed"
|
||
out.error = "微信授权页拉取失败: " .. (err or ("HTTP " .. tostring(resp and resp.status)))
|
||
return { status = 200, json = out }
|
||
end
|
||
local html = resp.body or ""
|
||
-- 两条路径互为兜底（照参考 extractLoomyWechatUuid 的正则）：
|
||
-- 主：<img class="js_qrcode_img" src="/connect/qrcode/<uuid>"/>
|
||
-- 兜底：var fordevtool = "…/connect/l/qrconnect?uuid=<uuid>"
|
||
-- 关键：无需执行 JS —— 这是本方案能脱离浏览器的基础。
|
||
local uuid = html:match("/connect/qrcode/([%w_%-=+/]+)")
|
||
or html:match("l/qrconnect%?uuid=([%w_%-=+/]+)")
|
||
if not uuid or uuid == "" then
|
||
sess.state = "failed"
|
||
out.error = "微信授权页未包含二维码 uuid（页面结构可能已变化）"
|
||
return { status = 200, json = out }
|
||
end
|
||
sess.wechat_uuid = uuid
|
||
sess.wechat_last = ""
|
||
-- 二维码图交给前端渲染（参考把 JPEG 转 data URL；这里给前端 URL，省一次下载）
|
||
out.qr_url = w.qr_url:gsub("{uuid}", uuid)
|
||
out.url = authUrl
|
||
logEvent("微信二维码已就绪 " .. plat.id)
|
||
elseif plat.flow == "init-poll" then
|
||
-- 两段式服务端中介授权（ZCode）：init 拿 flow_id + authorize_url，
|
||
-- 用户授权后轮询 poll/{flow_id} 拿 token。
|
||
-- 会话密钥是**本地造的 32 字节 hex**，作 Bearer 用（官方就是这么做的）。
|
||
local ip = plat.initpoll
|
||
local flowSecret = sha256_hex(newToken() .. tostring(os.time and os.time() or 0))
|
||
.. sha256_hex(newToken())
|
||
local resp, err = __llmsproxy_http({
|
||
url = ip.init_url,
|
||
method = "POST",
|
||
headers = {
|
||
["Accept"] = "application/json",
|
||
["Content-Type"] = "application/json",
|
||
["Authorization"] = "Bearer " .. flowSecret,
|
||
["User-Agent"] = "ZCode/" .. (ip.app_version or "3.14.3"),
|
||
["HTTP-Referer"] = ip.origin or "",
|
||
["X-ZCode-App-Version"] = ip.app_version or "3.14.3",
|
||
["X-Platform"] = "win32",
|
||
},
|
||
body = json.encode({ provider = ip.provider or "bigmodel" }),
|
||
})
|
||
if err then
|
||
sess.state = "failed"
|
||
out.error = "授权初始化失败: " .. err
|
||
return { status = 200, json = out }
|
||
end
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
local data = ok and type(rec) == "table" and rec.data or nil
|
||
if not data or type(data.flow_id) ~= "string" or data.flow_id == "" then
|
||
sess.state = "failed"
|
||
out.error = "授权初始化响应缺少 flow_id（HTTP " .. tostring(resp.status) .. "）"
|
||
return { status = 200, json = out }
|
||
end
|
||
sess.init_flow_id = data.flow_id
|
||
sess.init_secret = flowSecret
|
||
sess.device_interval = tonumber(data.poll_interval_sec) or ip.interval or 2
|
||
out.url = data.authorize_url or plat.login_url
|
||
out.session.interval = sess.device_interval
|
||
logEvent("授权流程已初始化 " .. plat.id .. " flow=" .. tostring(data.flow_id):sub(1, 12))
|
||
elseif plat.flow == "device-poll" then
|
||
-- 设备码：申请码，把 user_code + 授权 URL 给用户，verifier 存进会话。
|
||
-- -- 两种形态：
|
||
-- ① OAuth 设备码（Minimax/Cline）：POST 拿 device_code + user_code，
|
||
-- 再 GET token_url?device_code=... 轮询（code_body / token_body 模板）。
|
||
-- ② PKCE 授权页（Qoder）：**不申请设备码** —— 本地造 PKCE，直接把
|
||
-- {authBase}/...?challenge&nonce&machine_id&client_id 给用户当授权页，
|
||
-- 再轮询 token_url?nonce&verifier 由服务端"回填"token（404=继续）。
|
||
-- 此时 code_url 带 Q_QUERY 后缀表示"GET + query 模板"，无 device_code。
|
||
local verifier, challenge = devicePkce()
|
||
local machineId = newToken():sub(1, 32)
|
||
local dm = plat.device.code_method or "POST"
|
||
local rec = nil
|
||
if dm == "GET_QUERY" or plat.device.auth_query then
|
||
-- 形态②：授权页 URL 由模板拼装，无网络申请
|
||
local q = (plat.device.auth_query or "")
|
||
:gsub("{challenge}", challenge):gsub("{nonce}", sess.nonce)
|
||
:gsub("{machine_id}", machineId):gsub("{verifier}", verifier)
|
||
out.url = plat.device.code_url .. "?" .. q
|
||
sess.device_verifier = verifier
|
||
sess.device_challenge = challenge
|
||
sess.device_nonce = sess.nonce
|
||
sess.device_machine = machineId
|
||
sess.device_interval = plat.device.interval or 2
|
||
out.session.interval = sess.device_interval
|
||
logEvent("授权页已就绪 " .. plat.id)
|
||
return { status = 200, json = out }
|
||
end
|
||
local body = (plat.device.code_body:gsub("{challenge}", challenge))
|
||
local resp, err = __llmsproxy_http({
|
||
url = plat.device.code_url,
|
||
method = dm,
|
||
headers = { ["Accept"] = "application/json", ["Content-Type"] = "application/x-www-form-urlencoded" },
|
||
body = body,
|
||
})
|
||
if err then
|
||
sess.state = "failed"
|
||
out.error = "设备码申请失败: " .. err
|
||
return { status = 200, json = out }
|
||
end
|
||
local ok, r2 = pcall(json.decode, resp.body or "")
|
||
rec = ok and type(r2) == "table" and r2 or nil
|
||
if not rec or not rec.device_code then
|
||
sess.state = "failed"
|
||
out.error = "设备码响应无法解析（HTTP " .. tostring(resp.status) .. "）"
|
||
return { status = 200, json = out }
|
||
end
|
||
sess.device_code = rec.device_code
|
||
sess.device_verifier = verifier
|
||
sess.device_challenge = challenge
|
||
sess.device_interval = tonumber(rec.interval) or plat.device.interval or 5
|
||
sess.user_code = rec.user_code
|
||
-- 授权页 URL：优先用 verification_uri_complete（免手输 user_code）
|
||
out.url = rec.verification_uri_complete or rec.verification_uri or rec.verification_url or plat.login_url
|
||
out.session.user_code = rec.user_code
|
||
out.session.interval = sess.device_interval
|
||
logEvent("设备码已申请 " .. plat.id .. " user_code=" .. tostring(rec.user_code))
|
||
else
|
||
-- ①②：URL 交给用户自己的浏览器。
|
||
--
|
||
-- callback 流程的授权 URL 构造有三条硬性要求（此前都错）：
|
||
-- 1) **每个平台的参数集不同**，不能套通用模板：Trae 用 auth_callback_url
|
||
-- （不是 redirect_uri）、Gemini 用标准 OAuth 四参数、LobsterAI 的 login
|
||
-- 在 **hash 段**（/portal#/login）。
|
||
-- 2) 端口必须用**本机实际监听端口**，不能硬编码 8081（非默认部署会全错）。
|
||
-- 3) redirect_uri 必须百分号编码（含 :// 与 :，不编码会被授权页拒）。
|
||
local port = gatewayPort()
|
||
if plat.flow == "callback" then
|
||
if type(plat.authorize) == "table" then
|
||
local vars
|
||
if sess.machine_id then
|
||
vars = { machine_id = sess.machine_id, device_id = sess.device_id,
|
||
trace_id = sess.login_trace_id }
|
||
end
|
||
out.url = buildAuthorizeUrl(plat, port, sess.nonce, sess.redirect_uri, vars)
|
||
else
|
||
local cb = "http://localhost:" .. tostring(port) .. "/api/plugins/http/channels/callback"
|
||
local sep = plat.login_url:find("?", 1, true) and "&" or "?"
|
||
out.url = plat.login_url .. sep .. "redirect_uri=" .. rfc3986Escape(cb)
|
||
.. "&state=" .. sess.nonce
|
||
end
|
||
-- callback 流的 redirect_uri 是**回环地址**（127.0.0.1 / localhost）。
|
||
-- 回环地址由「打开授权页的那台机器」解析：用户在自己电脑上打开时，重定向
|
||
-- 落在**用户机器**，回调永远到不了本网关 —— 这是服务器部署下 callback 流
|
||
-- 无法靠「本机浏览器」完成的根本原因（CodeBuddy 能用的原因是它走
|
||
-- state-poll，根本不需要回调）。
|
||
--
|
||
-- 故 callback 流要走**服务端浏览器**：授权页在网关本机打开（经 VNC 呈现给
|
||
-- 运维交互），重定向落本机回环，回调命中本插件的 loopback 接收器/挂载点。
|
||
-- 没有浏览器栈时**如实说明**，不假装这个 URL 在用户机器上能用。
|
||
local deps = browserDeps()
|
||
if deps.ok then
|
||
local bs, berr = spawnBrowser(out.url)
|
||
if not berr then
|
||
out.view_url = bs.view_url
|
||
out.session.cdp_port = bs.cdp_port
|
||
sess.cdp_port = bs.cdp_port
|
||
sess.collect_expr = plat.collect_expr or plat.callback_collect_expr
|
||
out.server_browser = true
|
||
logEvent("服务端浏览器已就绪 " .. plat.id .. " (CDP :" .. tostring(bs.cdp_port) .. ")")
|
||
else
|
||
out.browser_error = berr
|
||
logEvent("服务端浏览器启动失败 " .. plat.id .. ": " .. berr)
|
||
end
|
||
else
|
||
local miss = {}
|
||
for _, m in ipairs(deps.missing) do miss[#miss + 1] = m.bin end
|
||
out.browser_error = "缺浏览器栈依赖: " .. table.concat(miss, ", ")
|
||
end
|
||
out.hint = out.server_browser
|
||
and "请在 VNC 窗口内完成授权（回调会落在网关本机）"
|
||
or "callback 流的回调是回环地址，只有与网关同机的浏览器才能完成；请先安装浏览器栈（channels/deps/status 可查缺什么）"
|
||
else
|
||
out.url = plat.login_url
|
||
end
|
||
end
|
||
return { status = 200, json = out }
|
||
end
|
||
|
||
-- lobsteraiClientVersion(plat)：解析有道客户端版本号（带缓存与兜底）。
|
||
--
|
||
-- 三个消费点都要它：exchange 的 `version`、续期请求体的 `version`、签到 query。
|
||
-- 集中一处避免各自拉取。照参考 LobsteraiVersionResolver：
|
||
-- - 远程成功 → 用远程值并缓存；
|
||
-- - 失败 → 用兜底值但**不缓存**（缓存会让一次瞬时故障在 TTL 内持续发酵）。
|
||
-- **绝不能写死**：实测 2026-10-13 上游已是 2026.9.23。
|
||
local function lobsteraiClientVersion(plat)
|
||
local cv = plat.client_version
|
||
if type(cv) ~= "table" then return "2026.9.4" end
|
||
local cache = plugin.state.clientVersion
|
||
local now = os.time and os.time() or 0
|
||
if type(cache) == "table" and cache.value and cache.at
|
||
and (now - cache.at) < (cv.ttl or 3600) then
|
||
return cache.value
|
||
end
|
||
local resp, err = __llmsproxy_http({
|
||
url = cv.url, method = "GET",
|
||
headers = { ["Accept"] = "application/json", ["User-Agent"] = "LobsterAI/0.1.0" },
|
||
})
|
||
if not err and resp and resp.status == 200 then
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
local v = ok and rec
|
||
-- 按 path（data.value.version）逐层下钻
|
||
for seg in tostring(cv.path or ""):gmatch("[^%.]+") do
|
||
if type(v) ~= "table" then v = nil break end
|
||
v = v[seg]
|
||
end
|
||
-- 格式校验（照参考的日期式版本号正则）：主干点分数字，可选预发布后缀。
|
||
-- 不校验而直接采信：上游返 HTML/空值时会拼出一个更费解的失败。
|
||
if type(v) == "string" and v:match("^%d+[%d%.]*[%w%.%-]*$") then
|
||
plugin.state.clientVersion = { value = v, at = now }
|
||
return v
|
||
end
|
||
logEvent("有道版本号格式异常，改用兜底: " .. tostring(v))
|
||
end
|
||
-- 失败：兜底且不缓存
|
||
return cv.fallback or "2026.9.4"
|
||
end
|
||
|
||
-- lobsteraiExchange(plat, code, s)：用 authCode 换有道凭据。
|
||
--
|
||
-- 同一段交换逻辑有两处入口：① 回调落到本插件挂载点（oauth_callback），
|
||
-- ② 回调落到本机 loopback 接收器、由 poll_login 读文件推进。两条路必须
|
||
-- 逐字一致 —— 否则改一处漏一处，正是 go:embed 三连坑那种「同一 bug 多副面孔」。
|
||
-- 故集中在此，返回 (credential_json, account, err)。
|
||
local function lobsteraiExchange(plat, code, s)
|
||
if type(code) ~= "string" or code == "" then return nil, nil, "missing authCode" end
|
||
local now = tostring(os.time() * 1000)
|
||
local resp, err = __llmsproxy_http({
|
||
url = plat.callback.token_url, method = "POST",
|
||
headers = { ["Content-Type"] = "application/json", ["Accept"] = "application/json",
|
||
["User-Agent"] = "LobsterAI/0.1.0" },
|
||
body = json.encode({ authCode = code, firstKeyfrom = s.first_keyfrom,
|
||
latestKeyfrom = now, uuid = s.install_uuid, version = lobsteraiClientVersion(plat) }),
|
||
})
|
||
if err or not resp or resp.status ~= 200 then
|
||
return nil, nil, "LobsterAI exchange 请求失败: " .. tostring(err or (resp and resp.status))
|
||
end
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
local d = ok and type(rec) == "table" and rec.data
|
||
if not (rec and type(rec) == "table" and rec.code == 0 and type(d) == "table"
|
||
and type(d.accessToken) == "string" and d.accessToken ~= "") then
|
||
-- 把上游的原因带出来（实测失败形如 code=40102 message="无效或已过期的授权码"），
|
||
-- 否则运维只看到「交换失败」而无法区分是码过期、参数错还是版本被拒。
|
||
local why = ""
|
||
if ok and type(rec) == "table" then
|
||
why = tostring(rec.msg or rec.message or ("code=" .. tostring(rec.code)))
|
||
end
|
||
return nil, nil, "LobsterAI exchange 失败: " .. why
|
||
end
|
||
local u = type(d.user) == "table" and d.user or {}
|
||
local function nonempty(v) return type(v) == "string" and v ~= "" and v or nil end
|
||
-- uid 四级回退（照参考 resolveLobsteraiUid）：user.id → userId → yid → token 摘要
|
||
local uid = nonempty(u.id) or nonempty(u.userId) or nonempty(u.yid)
|
||
or sha256_hex(d.accessToken):sub(1, 16)
|
||
local account = nonempty(u.nickname) or uid
|
||
-- uuid/first_keyfrom 必须随凭据保存：续期请求体要原样回传（参考注释点名）。
|
||
local cred = { access_token = d.accessToken, refresh_token = d.refreshToken or "",
|
||
uid = uid, user_id = nonempty(u.userId) or nonempty(u.yid) or "", nickname = account,
|
||
uuid = s.install_uuid, first_keyfrom = s.first_keyfrom, latest_keyfrom = now }
|
||
local exp = tonumber(d.expiresIn)
|
||
if exp and exp > 0 then cred.expires_at = tostring(os.time() * 1000 + exp * 1000)
|
||
else cred.expires_at = credentialExpiresAtMs(cred) end
|
||
return json.encode(cred), account, nil
|
||
end
|
||
|
||
-- plugin.poll_login(session_id) 由页面轮询：会话是否完成。
|
||
--
|
||
-- 对 device-poll 会话，每次轮询**推进一步**设备码换 token（deviceOneStep）：
|
||
-- 轮询由页面驱动而不在 Lua 里阻塞，因为插件是单 VM 单锁，阻塞循环会卡死
|
||
-- 本插件全部钩子。成功则落凭据+接入源（走 complete_login）。
|
||
--
|
||
-- 关键：**必须把 session 上的 account_id 传给 complete_login**（真实缺陷）：
|
||
-- 页面流程是「先 account/add 建占位账号（credentialRef=channels:<plat>:<aid>）
|
||
-- → login 带 account_id → 轮询」。若这里不带 account_id，complete_login 会走
|
||
-- 兼容旧路径，凭据落到 `channels:<plat>` 这个**与占位账号无关的键**，而账号池
|
||
-- 条目的 credentialRef 指向 `channels:<plat>:<aid>` —— 于是 account/list 报
|
||
-- has_credential=false、credits/balances 报「无凭据」，表现为「登录成功但无法
|
||
-- 获取账号信息」。对齐参考 BuddyAuth.login 的 `flowOptions.accountId` 语义。
|
||
-- 前向声明：这些实现都在本文件下方，而 poll_login / oauth_callback（更早的代码）
|
||
-- 就要调用它们。Lua 的 local 作用域看不到其后的定义，所以必须在**第一个调用点
|
||
-- 之前**占坑。此前它们是全局函数，靠「全局表在运行时才解析」侥幸工作；
|
||
-- 改成 local 后这个隐式依赖就断了 —— 表现为
|
||
-- attempt to call global 'traeCallback' (a nil value)。
|
||
local traeCallback, traeDeriveDeviceId15, traeDeriveMarketUserId, traeDeriveSessionId
|
||
local traeCheckinHeaders, traeFixNickname
|
||
|
||
function plugin.poll_login(req)
|
||
local id = (req and req.query and req.query.id) or ""
|
||
sweepSessions()
|
||
local s = sessions()[id]
|
||
if not s then return { status = 200, json = { state = "gone" } } end
|
||
|
||
-- 回调流（callback）的凭据推进：授权页在**服务端浏览器**里打开，平台把
|
||
-- 授权结果重定向回**本机回环地址**，由插件自己的 loopback 接收器（路径按各
|
||
-- 平台注册值：有道 /auth/callback、Trae /authorize、Gemini /oauth-callback）
|
||
-- 接住并写下 {code,state}。这里读它并完成交换。
|
||
--
|
||
-- 为什么要服务端浏览器：redirect_uri 是回环地址，由「打开授权页的那台机器」
|
||
-- 解析。远程用户在自己电脑上打开时，重定向落在**用户机器**上，永远到不了
|
||
-- 本网关。CodeBuddy 之所以一直能用，是因为它走 state-poll，根本不需要回调。
|
||
if s.flow == "callback" and s.state == "pending" and s.redirect_uri then
|
||
local cb, _ = readLoopbackCallback(s.id)
|
||
local gotState = cb and (cb.state or "")
|
||
local code = cb and (cb.code or cb.authCode or "")
|
||
-- Trae 的回调不带 state（token 直接放在 query 里），非 Trae 必须 state 匹配。
|
||
local stateOK = (s.platform == "trae") or (gotState ~= "" and gotState == s.nonce)
|
||
-- 只有「回调真到了且 state 对」才推进；文件还没出现时保持 pending，
|
||
-- 绝不能把「用户还没操作完」当成失败。
|
||
if cb and stateOK then
|
||
local plat = platformById(s.platform)
|
||
local credential, account, cerr
|
||
if s.platform == "lobsterai" then
|
||
-- 有道：authCode → exchange（与 oauth_callback 路径共用同一助手，防漂移）
|
||
credential, account, cerr = lobsteraiExchange(plat, code, s)
|
||
elseif s.platform == "trae" then
|
||
-- Trae：回调把 token 直接放在 query 里（refreshToken/userJwt/userInfo），
|
||
-- 故把整个回调 query 交给 traeCallback（它在两条路径上共用）。
|
||
credential, account, cerr = traeCallback(plat, cb, s)
|
||
if not credential and code ~= "" then
|
||
-- 回调只给了 code（PKCE 形态）→ 用 exchange 端点的标准交换
|
||
local body = (plat.callback.exchange_body or "")
|
||
:gsub("{client_id}", plat.callback.client_id or "")
|
||
:gsub("{code}", code)
|
||
:gsub("{port}", tostring(gatewayPort()))
|
||
local resp, err = __llmsproxy_http({ url = plat.callback.exchange_url,
|
||
method = "POST", headers = { ["Content-Type"] = "application/json" }, body = body })
|
||
if err or not resp or resp.status ~= 200 then
|
||
cerr = "Trae 授权码交换失败: " .. tostring(err or (resp and resp.status))
|
||
else
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
local access = ok and type(rec) == "table"
|
||
and (rec.Token or rec.token or rec.AccessToken or rec.access_token)
|
||
if not access then cerr = "Trae 授权码交换响应缺少 Token"
|
||
else credential, account, cerr = json.encode({ access_token = access }), "trae", nil end
|
||
end
|
||
end
|
||
else
|
||
-- Gemini 等标准 OAuth：表单交换（必带 client_secret，见 token_body 注释）
|
||
local body = (plat.callback.token_body or "")
|
||
:gsub("{code}", code)
|
||
:gsub("{port}", tostring(gatewayPort()))
|
||
:gsub("{verifier}", s.device_verifier or "")
|
||
local resp, err = __llmsproxy_http({
|
||
url = plat.callback.token_url, method = "POST",
|
||
headers = { ["Content-Type"] = "application/x-www-form-urlencoded",
|
||
["Accept"] = "application/json" },
|
||
body = body,
|
||
})
|
||
if err or not resp or resp.status ~= 200 then
|
||
cerr = "token 交换失败: " .. tostring(err or (resp and resp.status))
|
||
if resp and resp.body then cerr = cerr .. "（" .. tostring(resp.body):sub(1, 160) .. "）" end
|
||
else
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if not ok or type(rec) ~= "table" or not rec.access_token then
|
||
cerr = "token 交换响应缺少 access_token"
|
||
else
|
||
credential, account = json.encode(rec), "oauth"
|
||
end
|
||
end
|
||
end
|
||
reapLoopback(s.id)
|
||
if cerr then
|
||
s.state = "failed"
|
||
s.message = cerr
|
||
else
|
||
local res = plugin.complete_login({ platform = s.platform, credential = credential,
|
||
account = account, account_id = s.account_id })
|
||
if res.json and (res.json.ok or res.json.account_id) then
|
||
s.state = "completed"
|
||
s.account = account
|
||
else
|
||
s.state = "failed"
|
||
s.message = (res.json and res.json.error) or "接入源失败"
|
||
end
|
||
end
|
||
end
|
||
end
|
||
|
||
-- 条件不能要求 device_code：Qoder 形态是 PKCE 授权页，**没有 device_code**
|
||
-- （本地造 verifier/challenge，服务端按 nonce 找回待授权会话）。
|
||
-- 用「有 device_code 或有 device_verifier」表达"这是个可推进的设备码/授权页会话"。
|
||
if s.flow == "device-poll" and s.state == "pending"
|
||
and (s.device_code or s.device_verifier) then
|
||
local plat = platformById(s.platform)
|
||
local done, payload = deviceOneStep(plat, s)
|
||
if done and payload then
|
||
if payload.ok then
|
||
-- 设备码到 token 后，有的平台还要第二跳（Cline register）换最终凭据
|
||
local cred, acct, rerr = deviceRegister(plat, payload)
|
||
if rerr then
|
||
s.state = "failed"
|
||
s.message = rerr
|
||
else
|
||
-- 必须带 account_id：页面流程先 account/add 建了占位账号，
|
||
-- 不带就会落到与占位账号无关的 `channels:<plat>` 键（见 poll_login 顶部注释）。
|
||
local res = plugin.complete_login({ platform = s.platform, credential = cred,
|
||
account = acct or payload.account, account_id = s.account_id })
|
||
if res.json and res.json.ok then
|
||
s.state = "completed"
|
||
s.account = acct or payload.account
|
||
else
|
||
s.state = "failed"
|
||
s.message = (res.json and res.json.error) or "接入源失败"
|
||
end
|
||
end
|
||
else
|
||
s.state = "failed"
|
||
s.message = payload.message
|
||
end
|
||
end
|
||
elseif s.flow == "qr-poll" and s.state == "pending" and s.qr_code then
|
||
-- 轮询 login_with_qrcode_code：status ∈ pending/logging/canceled/success。
|
||
-- 参考：**任何异常都降级为 pending**（网络抖动/响应畸形/未知 status），
|
||
-- success 但缺 token 也视为未完成（否则产出空凭据并卡死）。
|
||
local plat = platformById(s.platform)
|
||
local q = plat and plat.qr
|
||
if q then
|
||
local resp, err = __llmsproxy_http({
|
||
url = q.api_base .. q.auth_prefix .. q.poll_path,
|
||
method = "POST",
|
||
headers = { ["Accept"] = "application/json", ["Content-Type"] = "application/json" },
|
||
body = json.encode({ qrcode_code = s.qr_code }),
|
||
})
|
||
if not err and resp then
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
local env = ok and type(rec) == "table" and rec or nil
|
||
if env and env.code == 0 and type(env.data) == "table" then
|
||
local st = env.data.status
|
||
if st == "canceled" then
|
||
s.state = "failed"
|
||
s.message = "用户取消了扫码授权"
|
||
elseif st == "success" then
|
||
local at = env.data.access_token
|
||
if type(at) ~= "string" or at == "" then
|
||
-- 缺 token 的 success 视为未完成（不产出空凭据）
|
||
s.wechat_hint = "扫码成功，等待凭据下发"
|
||
else
|
||
local cred = json.encode({
|
||
access_token = at,
|
||
refresh_token = env.data.refresh_token,
|
||
office_identity = env.data.office_identity,
|
||
token_type = "Bearer",
|
||
account_type = "personal",
|
||
})
|
||
local res = plugin.complete_login({ platform = s.platform, credential = cred,
|
||
account = "raccoon", account_id = s.account_id })
|
||
if res.json and res.json.ok then
|
||
s.state = "completed"
|
||
s.account = "raccoon"
|
||
else
|
||
s.state = "failed"
|
||
s.message = (res.json and res.json.error) or "接入源失败"
|
||
end
|
||
end
|
||
elseif st == "logging" then
|
||
s.wechat_hint = "已扫码，正在登录"
|
||
end
|
||
-- pending 与未知值：继续等
|
||
end
|
||
end
|
||
end
|
||
elseif s.flow == "wechat-poll" and s.state == "pending" and s.wechat_uuid then
|
||
-- 长轮询一步：判据照参考（**404 与 405 不可读反**）。
|
||
local plat = platformById(s.platform)
|
||
local w = plat and plat.wechat
|
||
if w then
|
||
local last = s.wechat_last or ""
|
||
local url = w.poll_url .. "?uuid=" .. s.wechat_uuid
|
||
.. (last ~= "" and ("&last=" .. last) or "")
|
||
.. "&_=" .. tostring(os.time and os.time() or 0)
|
||
local resp, err = __llmsproxy_http({
|
||
url = url, method = "GET",
|
||
headers = { ["Accept"] = "*/*", ["User-Agent"] = w.user_agent,
|
||
["Referer"] = w.auth_url:sub(1, (w.auth_url:find("?")) and w.auth_url:find("?") - 1 or #w.auth_url) },
|
||
})
|
||
if not err and resp then
|
||
local body = resp.body or ""
|
||
local errcode = body:match("wx_errcode%s*=%s*(%d+)") or ""
|
||
local code = body:match("wx_code%s*=%s*'([^']*)'") or ""
|
||
s.wechat_last = errcode
|
||
if errcode == "405" then
|
||
-- **已确认**（wx_code 在此帧）。405 却没带 code 是异常形态，
|
||
-- 保守判"已扫码"继续轮询，**绝不**拿空 code 去换凭据。
|
||
if code ~= "" then
|
||
local cred, cerr = wechatExchange(plat, code)
|
||
if cerr then
|
||
s.state = "failed"
|
||
s.message = cerr
|
||
else
|
||
local acct = "wechat"
|
||
local res = plugin.complete_login({ platform = s.platform, credential = cred,
|
||
account = acct, account_id = s.account_id })
|
||
if res.json and res.json.ok then
|
||
s.state = "completed"
|
||
s.account = acct
|
||
else
|
||
s.state = "failed"
|
||
s.message = (res.json and res.json.error) or "接入源失败"
|
||
end
|
||
end
|
||
end
|
||
elseif errcode == "404" then
|
||
-- 已扫码待确认：继续轮询（**不是**完成 —— 早期读反导致卡住）
|
||
s.wechat_hint = "已扫码，请在手机上确认"
|
||
elseif errcode == "403" then
|
||
s.state = "failed"
|
||
s.message = "用户取消了授权"
|
||
elseif errcode == "402" then
|
||
s.state = "failed"
|
||
s.message = "二维码已失效，请重新发起登录"
|
||
end
|
||
-- 408 与未知值一律继续等（保守：绝不误判成功）
|
||
end
|
||
end
|
||
elseif s.flow == "init-poll" and s.state == "pending" and s.init_flow_id then
|
||
-- 轮询 poll/{flow_id}：判据照参考 —— 4xx（除 408/429）才是终态失败，
|
||
-- 5xx 与网络错误继续重试；code!=0 或 data 缺失 → pending。
|
||
local plat = platformById(s.platform)
|
||
local ip = plat and plat.initpoll
|
||
if ip then
|
||
local url = ip.poll_url:gsub("{flow_id}", s.init_flow_id)
|
||
local resp, err = __llmsproxy_http({
|
||
url = url, method = "GET",
|
||
headers = {
|
||
["Accept"] = "application/json",
|
||
["Authorization"] = "Bearer " .. (s.init_secret or ""),
|
||
["User-Agent"] = "ZCode/" .. (ip.app_version or "3.14.3"),
|
||
["HTTP-Referer"] = ip.origin or "",
|
||
["X-ZCode-App-Version"] = ip.app_version or "3.14.3",
|
||
},
|
||
})
|
||
if not err and resp then
|
||
local st = resp.status
|
||
local terminal = st >= 400 and st < 500 and st ~= 408 and st ~= 429
|
||
if terminal then
|
||
s.state = "failed"
|
||
s.message = "轮询被拒（HTTP " .. tostring(st) .. "）"
|
||
else
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if ok and type(rec) == "table" and rec.code == 0 and type(rec.data) == "table" then
|
||
local d = rec.data
|
||
local status = d.status
|
||
if status == "failed" then
|
||
s.state = "failed"
|
||
s.message = "用户拒绝了授权或授权失败"
|
||
elseif status == "ready" then
|
||
-- token（zcode JWT）与 user.user_id 必需；第三方 token 取
|
||
-- bigmodel/zai 二者之一（参考按 provider 取对应分支）。
|
||
local jwt = d.token
|
||
local user = d.user or {}
|
||
local pick = function(blk)
|
||
if type(blk) ~= "table" then return nil, nil end
|
||
return blk.access_token or blk.accessToken, blk.refresh_token or blk.refreshToken
|
||
end
|
||
local bmAt, bmRt = pick(d.bigmodel)
|
||
local zaiAt, zaiRt = pick(d.zai)
|
||
local thirdAt = bmAt or zaiAt
|
||
if type(jwt) ~= "string" or jwt == "" then
|
||
s.state = "failed"
|
||
s.message = "授权响应缺少 zcode token"
|
||
else
|
||
local cred = json.encode({
|
||
access_token = jwt,
|
||
zcode_jwt = jwt,
|
||
-- 第三方 token 仅作备用身份，不参与推理（参考明确）
|
||
bigmodel_access_token = bmAt,
|
||
zai_access_token = zaiAt,
|
||
refresh_token = bmRt or zaiRt,
|
||
user_id = user.user_id or user.id,
|
||
nickname = user.name or user.email,
|
||
token_type = "Bearer",
|
||
account_type = "personal",
|
||
})
|
||
local acct = user.name or user.email or user.user_id or "zcode"
|
||
local res = plugin.complete_login({ platform = s.platform, credential = cred,
|
||
account = acct, account_id = s.account_id })
|
||
if res.json and res.json.ok then
|
||
s.state = "completed"
|
||
s.account = acct
|
||
else
|
||
s.state = "failed"
|
||
s.message = (res.json and res.json.error) or "接入源失败"
|
||
end
|
||
end
|
||
end
|
||
-- status == "pending" 或其它未知值：继续等（不误报）
|
||
end
|
||
end
|
||
end
|
||
end
|
||
elseif s.flow == "state-poll" and s.state == "pending" and s.state_token then
|
||
-- Buddy（CodeBuddy）：state 轮询。状态里的 state_token 是 auth/state 下发的。
|
||
local plat = platformById(s.platform)
|
||
local sp = plat and plat.state
|
||
local resp, err = __llmsproxy_http({
|
||
url = (sp.token_url or "") .. "?state=" .. tostring(s.state_token),
|
||
method = "GET",
|
||
headers = { ["Accept"] = "application/json", ["X-No-Authorization"] = "true" },
|
||
})
|
||
-- 网络错误：继续轮询不中断（对齐参考 loopGetToken 的 catch 继续）
|
||
if not err and resp then
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if ok and type(rec) == "table" then
|
||
local code = rec.code
|
||
local data = rec.data
|
||
if resp.status == 200 and data ~= nil and type(data) == "table" and (data.accessToken or data.access_token) then
|
||
-- token 就绪。再拿账号（失败不阻塞，回退默认名）。
|
||
local access = data.accessToken or data.access_token
|
||
local accountData = nil
|
||
local aresp, aerr = __llmsproxy_http({
|
||
url = (sp.account_url or "") .. "?state=" .. tostring(s.state_token),
|
||
method = "GET",
|
||
headers = { ["Accept"] = "application/json", ["Authorization"] = "Bearer " .. access },
|
||
})
|
||
if not aerr and aresp and aresp.status == 200 then
|
||
local aok, arec = pcall(json.decode, aresp.body or "")
|
||
if aok and type(arec) == "table" and type(arec.data) == "table" then
|
||
accountData = arec.data
|
||
end
|
||
end
|
||
-- ① 组合完整凭据 JSON（对齐参考 buildCredential）：带 refresh_token /
|
||
-- expires_at / domain / user_id / nickname，而非只存裸 access_token。
|
||
-- 只存裸 token 会丢掉 refresh_token，导致 refreshable=false、无法静默
|
||
-- 续期，且 expires_at 未知。
|
||
local credTable = buildCredential(data, accountData)
|
||
local credJson = json.encode(credTable)
|
||
local acct = credTable.nickname
|
||
if acct == nil or acct == "" then
|
||
acct = credTable.user_id
|
||
end
|
||
if acct == nil or acct == "" then acct = "codebuddy" end
|
||
-- ② 必须带 account_id（页面流程的占位账号）；否则凭据落到无关的
|
||
-- `channels:<plat>` 键，账号池查不到。
|
||
local res = plugin.complete_login({ platform = s.platform, credential = credJson,
|
||
account = acct, account_id = s.account_id,
|
||
expires_at = credTable.expires_at, refreshable = credentialIsRefreshable(credTable) })
|
||
if res.json and res.json.ok then
|
||
s.state = "completed"
|
||
s.account = acct
|
||
else
|
||
s.state = "failed"
|
||
s.message = (res.json and res.json.error) or "接入源失败"
|
||
end
|
||
elseif code == sp.code_not_ready then
|
||
-- 11217 = 未就绪，继续轮询（对齐参考：业务码 11217 继续等）
|
||
elseif resp.status == 200 and data == nil then
|
||
-- data 为 null，继续轮询（参考明确此分支）
|
||
else
|
||
s.state = "failed"
|
||
s.message = "auth/token HTTP " .. tostring(resp.status) .. " code=" .. tostring(code)
|
||
end
|
||
end
|
||
end
|
||
end
|
||
return { status = 200, json = { state = s.state, account = s.account, message = s.message, interval = s.device_interval } }
|
||
end
|
||
|
||
-- plugin.complete_login(args) 由页面/回调调用：登录成功，存凭据并接入源。
|
||
--
|
||
-- 凭据只进保险库（0600、跨插件不可读），不进 state：state 会被
|
||
-- PUT /api/plugins/channels/state 整体替换，也会出现在 WebUI 里。
|
||
function plugin.complete_login(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then
|
||
-- 内部调用会直接传表
|
||
args = req
|
||
end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local token = args and args.credential
|
||
if not token or token == "" then return { status = 400, json = { error = "缺少凭据" } } end
|
||
|
||
-- 账号池路径：带 account_id 时写入池条目（对齐参考 account.create 的
|
||
-- 占位账号语义 —— 先有账号行，凭据随后填入）。
|
||
local aid = args.account_id
|
||
if aid and aid ~= "" then
|
||
local acct = poolGet(plat.id, aid)
|
||
if not acct then return { status = 400, json = { error = "账号不存在: " .. tostring(aid) } } end
|
||
local ref = acct.credentialRef
|
||
local _, serr = __llmsproxy_secrets.set(ref, token)
|
||
if serr then return { status = 400, json = { error = serr } } end
|
||
-- 从凭据自动补齐展示/续期字段（调用方漏传也不丢）。
|
||
-- 对齐参考 saveCredential：昵称取 credential.nickname，
|
||
-- expiresAt 由 credentialExpiresAtMs 推断（expires_at 或 JWT exp），
|
||
-- refreshable 看是否携带 refresh_token。
|
||
local credTbl = nil
|
||
if type(token) == "string" and token:sub(1, 1) == "{" then
|
||
local dok, drec = pcall(json.decode, token)
|
||
if dok and type(drec) == "table" then credTbl = drec end
|
||
end
|
||
local derivedNick = credTbl and credTbl.nickname
|
||
if derivedNick == nil or derivedNick == "" then derivedNick = credTbl and credTbl.user_id end
|
||
local derivedExp = credTbl and credentialExpiresAtMs(credTbl)
|
||
acct.nickname = args.account or derivedNick or acct.nickname or aid
|
||
acct.expiresAt = args.expires_at or (derivedExp and tostring(derivedExp)) or acct.expiresAt
|
||
if args.refreshable ~= nil then
|
||
acct.refreshable = args.refreshable and true or false
|
||
elseif credTbl ~= nil then
|
||
acct.refreshable = credentialIsRefreshable(credTbl)
|
||
else
|
||
acct.refreshable = acct.refreshable or false
|
||
end
|
||
poolAdd(plat.id, acct)
|
||
-- 终结该账号的未决会话
|
||
for id, sess in pairs(sessions()) do
|
||
if sess.platform == plat.id and sess.state == "pending"
|
||
and (sess.account_id == aid or sess.pool_account_id == aid) then
|
||
sess.state = "completed"
|
||
end
|
||
end
|
||
logEvent("账号凭据已入池 " .. plat.id .. "/" .. aid)
|
||
syncAccountSource(plat.id, aid)
|
||
return { status = 200, json = { ok = true, account_id = aid, source = accountSourceName(plat.id, aid) } }
|
||
end
|
||
|
||
-- 兼容旧路径：单账号模式（e2e 与既有端点仍走它）。
|
||
local ok, err = __llmsproxy_secrets.set("channels:" .. plat.id, token)
|
||
if err then return { status = 400, json = { error = err } } end
|
||
-- 上游源只吃 access token：凭据可能是完整 JSON（buddy 等 state-poll 平台），
|
||
-- 必须经 credentialOf 取出 access_token，不能把整个 JSON 当 api_key 发上去。
|
||
local legacyTok = credentialOf("channels:" .. plat.id) or token
|
||
|
||
plugin.state.accounts[plat.id] = {
|
||
account = args.account or "已登录",
|
||
added_at = os.time and os.time() or 0,
|
||
enabled = true,
|
||
}
|
||
-- 终结该平台未决会话
|
||
for id, sess in pairs(sessions()) do
|
||
if sess.platform == plat.id and sess.state == "pending" then sess.state = "completed" end
|
||
end
|
||
logEvent("已登录 " .. plat.name)
|
||
|
||
-- 接入为上游源 —— 这是本插件存在的意义
|
||
local r, aerr = __llmsproxy_kernel.call("add_source", {
|
||
source = {
|
||
name = "channels-" .. plat.id,
|
||
base_url = plat.base_url,
|
||
adapter = "openai",
|
||
api_key = legacyTok,
|
||
max_concurrent = 2,
|
||
models = (function()
|
||
local ms = {}
|
||
local eff = effectiveModels(plat.id)
|
||
for i, m in ipairs(eff) do ms[i] = { id = m, kind = "chat", priority = 20 } end
|
||
return ms
|
||
end)(),
|
||
},
|
||
})
|
||
if aerr then
|
||
-- 凭据已存下，但接入源失败。如实分开报告：把两者混成一个 ok=false 会让
|
||
-- 调用方以为登录失败从而重复登录。
|
||
logEvent("接入源失败 " .. plat.id .. ": " .. aerr)
|
||
return { status = 200, json = { ok = true, source_error = aerr } }
|
||
end
|
||
logEvent("已接入源 " .. r.name)
|
||
return { status = 200, json = { ok = true, source = r.name } }
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 额度领取
|
||
-- ============================================================================
|
||
|
||
-- plugin.claim_daily(platform_id) 领每日额度。设计为**可被定时任务调用**。
|
||
--
|
||
-- 只返回结果，不改 state 之外的东西：真正的额度体现在平台的响应里
|
||
-- （已用/剩余），本插件记录以便面板显示。
|
||
function plugin.claim_daily(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
if not plat.checkin or not plat.checkin.url then
|
||
return { status = 400, json = { error = plat.name .. " 不支持每日签到（平台未声明 checkin）" } }
|
||
end
|
||
-- 账号池路径：claim 某个池账号；否则旧路径单凭据。
|
||
-- credArgs 要一并交给 claim_fn：Trae 的签到头要用凭据里的
|
||
-- uid/access_token 派生设备身份（仅凭裸 token 拿不到这些字段）。
|
||
local tok, acctEntry, credArgs
|
||
if args.account_id and args.account_id ~= "" then
|
||
acctEntry = poolGet(plat.id, args.account_id)
|
||
if not acctEntry then return { status = 400, json = { error = "账号不存在" } } end
|
||
local _, _, rec = credentialOf(acctEntry.credentialRef)
|
||
tok = credentialOf(acctEntry.credentialRef)
|
||
credArgs = { account_id = args.account_id, credential = rec }
|
||
else
|
||
local _, _, rec = credentialOf("channels:" .. plat.id)
|
||
tok = credentialOf("channels:" .. plat.id)
|
||
credArgs = { credential = rec }
|
||
end
|
||
if not tok then return { status = 400, json = { error = "未登录" } } end
|
||
|
||
-- 平台可自定义领取请求形状；默认 Bearer + POST {}。
|
||
-- 参考实现的特殊形状（SDK-HMAC-SHA256 签名等）由该平台的 claim 钩子生成
|
||
-- （见 PLATFORMS 的 claim_fn），这里是通用路径。
|
||
local spec = {
|
||
url = plat.checkin.url,
|
||
method = plat.checkin.method or "POST",
|
||
headers = plat.checkin.headers or { ["Authorization"] = "Bearer " .. tok, ["Content-Type"] = "application/json" },
|
||
body = plat.checkin.body or "{}",
|
||
}
|
||
if plat.claim_fn then
|
||
local custom, cerr = plat.claim_fn(plat, tok, credArgs)
|
||
if cerr then return { status = 400, json = { error = cerr } } end
|
||
if custom then spec = custom end
|
||
end
|
||
|
||
local resp, err = __llmsproxy_http(spec)
|
||
if err then
|
||
logEvent("领取失败 " .. plat.id .. ": " .. err)
|
||
return { status = 400, json = { error = err } }
|
||
end
|
||
|
||
local acct
|
||
if acctEntry then
|
||
acct = acctEntry
|
||
else
|
||
acct = plugin.state.accounts[plat.id] or {}
|
||
end
|
||
acct.last_claim = os.time and os.time() or 0
|
||
acct.last_claim_status = resp.status
|
||
-- 平台可提供解析器把响应转成可读摘要（余额/获得额度）
|
||
if plat.claim_result_fn and resp.status == 200 then
|
||
local ok, summary = pcall(plat.claim_result_fn, resp.body)
|
||
if ok and summary then acct.last_claim_summary = summary end
|
||
end
|
||
if acctEntry then
|
||
poolAdd(plat.id, acctEntry)
|
||
else
|
||
plugin.state.accounts[plat.id] = acct
|
||
end
|
||
logEvent("领取返回 " .. tostring(resp.status))
|
||
return { status = 200, json = { ok = true, upstream_status = resp.status, body = resp.body, summary = acct.last_claim_summary } }
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 定时任务：自动领取
|
||
-- ============================================================================
|
||
--
|
||
-- 声明了 schedule 的插件会得到内核 ticker 驱动（无浏览器也执行），
|
||
-- 且任务跑在本插件自己的 VM 上 —— 所以任务里读 state/保险库与钩子看到的是同一份。
|
||
plugin.schedule = {
|
||
{ fn = "auto_claim", every = 86400, at = "08:00", jitter = 300 },
|
||
}
|
||
|
||
function plugin.auto_claim()
|
||
-- 自动签到开关（对齐参考 usage.autoCheckin）：关闭时不做任何领取。
|
||
plugin.state.settings = plugin.state.settings or {}
|
||
if plugin.state.settings.auto_checkin == false then return end
|
||
for _, plat in ipairs(allPlatforms()) do
|
||
local cap = CHANNEL_CREDITS[plat.id]
|
||
if not cap or not cap.claim then goto continue end
|
||
local legacy = accountOf(plat.id)
|
||
if legacy and legacy.enabled then
|
||
plugin.claim_daily({ platform = plat.id })
|
||
end
|
||
for _, a in ipairs(poolList(plat.id)) do
|
||
if a.enabled ~= false and credentialOf(a.credentialRef) then
|
||
plugin.claim_daily({ platform = plat.id, account_id = a.id })
|
||
end
|
||
end
|
||
::continue::
|
||
end
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 对外 HTTP 端点（设置页调用）
|
||
-- ============================================================================
|
||
|
||
plugin.http = {
|
||
{ path = "channels/platforms", method = "GET", handler = "list_platforms",
|
||
roles = { "admin" }, description = "平台清单与账号状态" },
|
||
{ path = "channels/login", method = "POST", handler = "start_login",
|
||
roles = { "admin" }, description = "发起某平台的登录" },
|
||
{ path = "channels/login/status", method = "GET", handler = "poll_login",
|
||
roles = { "admin" }, description = "轮询登录会话状态" },
|
||
{ path = "channels/login/complete", method = "POST", handler = "complete_login",
|
||
roles = { "admin" }, description = "登录完成：存凭据并接入源" },
|
||
{ path = "channels/claim", method = "POST", handler = "claim_daily",
|
||
roles = { "admin" }, description = "手动领取某平台每日额度" },
|
||
{ path = "channels/status", method = "GET", handler = "status_page",
|
||
roles = { "admin" }, description = "接入状态与最近日志" },
|
||
-- OAuth 回调落点：平台重定向回来带 code。
|
||
{ path = "channels/callback", method = "GET", handler = "oauth_callback",
|
||
public = false, roles = { "admin" }, description = "OAuth 回调" },
|
||
-- 账号池 / 模型开关 / 供应商治理 / 备份（对齐参考 channel-pack RPC 面）
|
||
{ path = "channels/account/add", method = "POST", handler = "account_add",
|
||
roles = { "admin" }, description = "向平台添加账号（占位或带凭据）" },
|
||
{ path = "channels/account/list", method = "POST", handler = "account_list",
|
||
roles = { "admin" }, description = "列平台账号池" },
|
||
{ path = "channels/account/update", method = "POST", handler = "account_update",
|
||
roles = { "admin" }, description = "改账号昵称/启用态" },
|
||
{ path = "channels/account/delete", method = "POST", handler = "account_delete",
|
||
roles = { "admin" }, description = "删除账号（含凭据与上游源）" },
|
||
{ path = "channels/account/test", method = "POST", handler = "account_test",
|
||
roles = { "admin" }, description = "测账号可达" },
|
||
{ path = "channels/account/refresh", method = "POST", handler = "account_refresh",
|
||
roles = { "admin" }, description = "刷新账号（重同步源）" },
|
||
{ path = "channels/account/reorder", method = "POST", handler = "account_reorder",
|
||
roles = { "admin" }, description = "调账号优先级" },
|
||
{ path = "channels/model/list", method = "POST", handler = "model_list",
|
||
roles = { "admin" }, description = "列平台模型与开关态" },
|
||
{ path = "channels/model/refresh", method = "POST", handler = "model_refresh",
|
||
roles = { "admin" }, description = "从上游拉取模型目录（远端为主、兜底补位）" },
|
||
{ path = "channels/model/set_disabled", method = "POST", handler = "model_set_disabled",
|
||
roles = { "admin" }, description = "开关单个模型" },
|
||
{ path = "channels/model/set_all_disabled", method = "POST", handler = "model_set_all_disabled",
|
||
roles = { "admin" }, description = "全开/全关平台模型" },
|
||
{ path = "channels/provider/status", method = "POST", handler = "provider_status",
|
||
roles = { "admin" }, description = "全平台状态（账号数/模型数/关闭态）" },
|
||
{ path = "channels/provider/set_enabled", method = "POST", handler = "provider_set_enabled",
|
||
roles = { "admin" }, description = "供应商整体开关" },
|
||
{ path = "channels/credits/claim_all", method = "POST", handler = "credits_claim_all",
|
||
roles = { "admin" }, description = "一键领取全平台每日额度" },
|
||
{ path = "channels/backup/export", method = "POST", handler = "backup_export",
|
||
roles = { "admin" }, description = "导出账号备份（含凭据）" },
|
||
{ path = "channels/backup/import", method = "POST", handler = "backup_import",
|
||
roles = { "admin" }, description = "导入账号备份" },
|
||
{ path = "channels/auto_checkin", method = "POST", handler = "auto_checkin",
|
||
roles = { "admin" }, description = "自动签到开关读写" },
|
||
{ path = "channels/credits/status", method = "POST", handler = "credits_status",
|
||
roles = { "admin" }, description = "逐账号签到状态" },
|
||
{ path = "channels/credits/balances", method = "POST", handler = "credits_balances",
|
||
roles = { "admin" }, description = "逐账号余额" },
|
||
{ path = "channels/credits/permanent_lock", method = "POST", handler = "credits_permanent_lock",
|
||
roles = { "admin" }, description = "永久积分锁定" },
|
||
{ path = "channels/account/reset", method = "POST", handler = "account_reset",
|
||
roles = { "admin" }, description = "清账号限流标记" },
|
||
{ path = "channels/account/retest", method = "POST", handler = "account_retest",
|
||
roles = { "admin" }, description = "重测账号" },
|
||
{ path = "channels/model/set_disabled_many", method = "POST", handler = "model_set_disabled_many",
|
||
roles = { "admin" }, description = "批量开关模型" },
|
||
{ path = "channels/model/clear_dead", method = "POST", handler = "model_clear_dead",
|
||
roles = { "admin" }, description = "清死模型" },
|
||
{ path = "channels/provider/get_order", method = "POST", handler = "provider_get_order",
|
||
roles = { "admin" }, description = "供应商显示顺序" },
|
||
{ path = "channels/provider/set_order", method = "POST", handler = "provider_set_order",
|
||
roles = { "admin" }, description = "设置供应商显示顺序" },
|
||
{ path = "channels/gateway/get_enabled", method = "POST", handler = "gateway_get_enabled",
|
||
roles = { "admin" }, description = "网关开关状态" },
|
||
{ path = "channels/gateway/set_enabled", method = "POST", handler = "gateway_set_enabled",
|
||
roles = { "admin" }, description = "网关整体开关" },
|
||
{ path = "channels/backup/status", method = "POST", handler = "backup_status",
|
||
roles = { "admin" }, description = "备份健康度" },
|
||
{ path = "channels/usage/token_ledger", method = "POST", handler = "usage_token_ledger",
|
||
roles = { "admin" }, description = "token 用量快照" },
|
||
{ path = "channels/usage/badge", method = "POST", handler = "usage_badge",
|
||
roles = { "admin" }, description = "渠道徽标" },
|
||
{ path = "channels/usage/badge_preference", method = "POST", handler = "usage_badge_preference",
|
||
roles = { "admin" }, description = "徽标显示偏好" },
|
||
{ path = "channels/onboarding/status", method = "POST", handler = "onboarding_status",
|
||
roles = { "admin" }, description = "新人任务状态" },
|
||
{ path = "channels/onboarding/claim", method = "POST", handler = "onboarding_claim",
|
||
roles = { "admin" }, description = "领取新人奖励" },
|
||
{ path = "channels/inject_platforms", method = "POST", handler = "inject_platforms",
|
||
roles = { "admin" }, description = "注入测试/扩展平台定义（运行时，不落盘）" },
|
||
-- 服务端浏览器栈（VNC 兜底）的运维面
|
||
{ path = "channels/deps/status", method = "GET", handler = "deps_status",
|
||
roles = { "admin" }, description = "浏览器栈依赖预检（缺什么、装哪个包）" },
|
||
{ path = "channels/browser/status", method = "GET", handler = "browser_status",
|
||
roles = { "admin" }, description = "服务端浏览器会话状态" },
|
||
{ path = "channels/browser/collect", method = "POST", handler = "collect_credentials",
|
||
roles = { "admin" }, description = "从服务端浏览器取凭据（CDP）" },
|
||
{ path = "channels/browser/stop", method = "POST", handler = "stop_browser",
|
||
roles = { "admin" }, description = "回收服务端浏览器栈" },
|
||
}
|
||
|
||
-- set_endpoints：改写某平台的端点声明（device.code_url/token_url、checkin.url、
|
||
-- base_url）。两个用途：
|
||
-- 1. 运维把某渠道指向自建代理/镜像（厂商被墙、企业出口、审计要求）
|
||
-- 2. 测试把端点指到假上游，行为测试才能不打真厂商
|
||
-- 只允许改已知字段，未知键拒绝 —— 端点声明是协议形状的一部分，静默加字段
|
||
-- 会破坏后续逻辑对形状的假设。
|
||
-- ============================================================================
|
||
-- 账号池 RPC（对齐参考 account.* 契约）
|
||
-- ============================================================================
|
||
-- account_add：向平台加一个账号（占位或带凭据）。
|
||
-- 对应参考 account.create；登录类的流程返回登录 URL，凭据在 login 完成后回填。
|
||
function plugin.account_add(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local aid = args.account_id or newToken():sub(1, 12)
|
||
if poolGet(plat.id, aid) then return { status = 400, json = { error = "账号已存在: " .. aid } } end
|
||
local ref = "channels:" .. plat.id .. ":" .. aid
|
||
if args.credential and args.credential ~= "" then
|
||
local _, serr = __llmsproxy_secrets.set(ref, args.credential)
|
||
if serr then return { status = 400, json = { error = serr } } end
|
||
end
|
||
local now = os.time and os.time() or 0
|
||
local entry = {
|
||
id = aid, provider = plat.id,
|
||
nickname = args.nickname or aid,
|
||
enabled = args.enabled ~= false,
|
||
credentialRef = ref,
|
||
refreshable = args.refreshable or false,
|
||
createdAt = now,
|
||
expiresAt = args.expires_at,
|
||
last_claim = 0, last_claim_status = 0, last_claim_summary = "",
|
||
}
|
||
poolAdd(plat.id, entry)
|
||
logEvent("账号入池 " .. plat.id .. "/" .. aid)
|
||
-- 已带凭据的账号立即同步上游源；未带凭据的等 login 完成
|
||
if args.credential and args.credential ~= "" then syncAccountSource(plat.id, aid) end
|
||
return { status = 200, json = { ok = true, account_id = aid, credentialRef = ref } }
|
||
end
|
||
|
||
-- account_list：列平台的账号（对齐参考 account.list，含余额状态字段）
|
||
function plugin.account_list(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local out = {}
|
||
for _, a in ipairs(poolList(plat.id)) do
|
||
local has = credentialOf(a.credentialRef)
|
||
out[#out+1] = {
|
||
id = a.id, nickname = a.nickname, enabled = a.enabled ~= false,
|
||
credentialRef = a.credentialRef, refreshable = a.refreshable or false,
|
||
createdAt = a.createdAt, expiresAt = a.expiresAt,
|
||
has_credential = has ~= nil and has ~= "",
|
||
-- 签到/余额展示字段
|
||
last_claim = a.last_claim, last_claim_status = a.last_claim_status,
|
||
last_claim_summary = a.last_claim_summary,
|
||
}
|
||
end
|
||
return { status = 200, json = { ok = true, accounts = out } }
|
||
end
|
||
|
||
-- account_update：改昵称 / enabled（对齐 account.update）
|
||
function plugin.account_update(req)
|
||
local args = bodyOf(req)
|
||
if args.account_id == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local acct = poolGet(plat.id, args and args.account_id)
|
||
if not acct then return { status = 400, json = { error = "账号不存在" } } end
|
||
local patch = type(args.patch) == "table" and args.patch or {}
|
||
if patch.nickname ~= nil then acct.nickname = tostring(patch.nickname) end
|
||
if patch.enabled ~= nil then acct.enabled = patch.enabled and true or false end
|
||
poolAdd(plat.id, acct)
|
||
-- enabled 变化要同步上游源（禁用即删掉该源）
|
||
if patch.enabled ~= nil then
|
||
if acct.enabled then syncAccountSource(plat.id, acct.id)
|
||
else dropAccountSource(plat.id, acct.id) end
|
||
end
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- account_delete：删账号 + 删凭据 + 删源（对齐 account.delete）
|
||
function plugin.account_delete(req)
|
||
local args = bodyOf(req)
|
||
if args.account_id == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local acct = poolGet(plat.id, args and args.account_id)
|
||
if not acct then return { status = 400, json = { error = "账号不存在" } } end
|
||
dropAccountSource(plat.id, acct.id)
|
||
__llmsproxy_secrets.delete(acct.credentialRef)
|
||
poolRemove(plat.id, acct.id)
|
||
logEvent("账号删除 " .. plat.id .. "/" .. acct.id)
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- account_test：测账号（对齐 account.test）—— 做一次上游可达探测。
|
||
-- 简化：内核 probe_all 是全局的；这里用 list_sources 里该账号源存在与否 + 凭据非空作为可达判据。
|
||
function plugin.account_test(req)
|
||
local args = bodyOf(req)
|
||
if args.account_id == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local acct = poolGet(plat.id, args and args.account_id)
|
||
if not acct then return { status = 400, json = { error = "账号不存在" } } end
|
||
local tok = credentialOf(acct.credentialRef)
|
||
if not tok or tok == "" then return { status = 200, json = { ok = false, error = "无凭据" } } end
|
||
-- 同步一次源（确保最新凭据已入），返回同步结果
|
||
syncAccountSource(plat.id, acct.id)
|
||
local srcs, _ = __llmsproxy_kernel.call("list_sources", {})
|
||
local found = false
|
||
for _, s in ipairs(srcs or {}) do
|
||
if s.name == accountSourceName(plat.id, acct.id) then found = true break end
|
||
end
|
||
if not found then return { status = 200, json = { ok = false, error = "源未同步（上游可能不可达）" } } end
|
||
return { status = 200, json = { ok = true, ms = 1 } }
|
||
end
|
||
|
||
-- account_refresh：刷新账号（对齐 account.refresh）—— 重新同步源 + 重新查余额
|
||
function plugin.account_refresh(req)
|
||
local args = bodyOf(req)
|
||
if args.account_id == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local acct = poolGet(plat.id, args and args.account_id)
|
||
if not acct then return { status = 400, json = { error = "账号不存在" } } end
|
||
local tok = credentialOf(acct.credentialRef)
|
||
if tok and tok ~= "" then syncAccountSource(plat.id, acct.id) end
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- account_reorder：调账号优先级（对齐 account.reorder）
|
||
function plugin.account_reorder(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local ordered = args and args.ordered_ids
|
||
if type(ordered) ~= "table" then return { status = 400, json = { error = "ordered_ids 必须是数组" } } end
|
||
for i, aid in ipairs(ordered) do
|
||
local acct = poolGet(plat.id, tostring(aid))
|
||
if acct then acct.priority = #ordered - i + 1 poolAdd(plat.id, acct) end
|
||
end
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 模型开关 RPC（对齐参考 model.*）
|
||
-- ============================================================================
|
||
-- plugin.model_refresh(platform?)：从上游拉模型目录。
|
||
--
|
||
-- 不传 platform 就刷新所有**声明了 models_remote** 的平台。失败不清缓存
|
||
-- （宁可留旧目录也别让平台变空），逐个返回结果供 UI 提示。
|
||
function plugin.model_refresh(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local targets = {}
|
||
if args and args.platform then
|
||
local plat = platformById(args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
targets = { plat }
|
||
else
|
||
for _, p in ipairs(allPlatforms()) do
|
||
if p.models_remote then targets[#targets+1] = p end
|
||
end
|
||
end
|
||
local results = {}
|
||
for _, plat in ipairs(targets) do
|
||
local ids, err = refreshRemoteModels(plat.id)
|
||
results[#results+1] = {
|
||
platform = plat.id,
|
||
ok = ids ~= nil,
|
||
count = ids and #ids or 0,
|
||
error = err,
|
||
}
|
||
-- 目录变了就重同步该平台所有源（模型清单写进了上游源）
|
||
if ids then
|
||
for _, a in ipairs(poolList(plat.id)) do syncAccountSource(plat.id, a.id) end
|
||
end
|
||
end
|
||
return { status = 200, json = { ok = true, results = results } }
|
||
end
|
||
|
||
function plugin.model_list(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local disabled = disabledModelsOf(plat.id)
|
||
local out = {}
|
||
for i, m in ipairs(effectiveModels(plat.id)) do
|
||
out[#out+1] = { id = m, name = m, disabled = disabled[m] and true or false, isFree = false }
|
||
end
|
||
local remote = plugin.state.remoteModels and plugin.state.remoteModels[plat.id]
|
||
return { status = 200, json = {
|
||
ok = true, models = out,
|
||
remote = remote ~= nil,
|
||
fetched_at = remote and remote.fetched_at or nil,
|
||
fallbackOnly = remote == nil,
|
||
} }
|
||
end
|
||
|
||
function plugin.model_set_disabled(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local mid = tostring(args and args.model_id or "")
|
||
if mid == "" then return { status = 400, json = { error = "缺 model_id" } } end
|
||
local want = args.disabled and true or false
|
||
setModelDisabled(plat.id, mid, want)
|
||
-- 重同步该平台的全部源，让模型开关立即生效
|
||
for _, a in ipairs(poolList(plat.id)) do syncAccountSource(plat.id, a.id) end
|
||
return { status = 200, json = { ok = true, disabled = want } }
|
||
end
|
||
|
||
function plugin.model_set_all_disabled(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local disabled = disabledModelsOf(plat.id)
|
||
if args.disabled then
|
||
for _, m in ipairs(effectiveModels(plat.id)) do disabled[m] = true end
|
||
else
|
||
for k in pairs(disabled) do disabled[k] = nil end
|
||
end
|
||
markDirty()
|
||
for _, a in ipairs(poolList(plat.id)) do syncAccountSource(plat.id, a.id) end
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 供应商开关 + 状态（对齐参考 provider.*）
|
||
-- ============================================================================
|
||
function plugin.provider_status(req)
|
||
local out = {}
|
||
for _, p in ipairs(allPlatforms()) do
|
||
local accts = poolList(p.id)
|
||
local enabledN = 0
|
||
for _, a in ipairs(accts) do if a.enabled ~= false then enabledN = enabledN + 1 end end
|
||
local disabled = disabledModelsOf(p.id)
|
||
local disabledN = 0
|
||
local eff = effectiveModels(p.id)
|
||
for _, m in ipairs(eff) do if disabled[m] then disabledN = disabledN + 1 end end
|
||
local closed = #eff > 0 and disabledN == #eff
|
||
local state_accounts = plugin.state.accounts[p.id]
|
||
local legacyN = (state_accounts and credentialOf("channels:" .. p.id)) and 1 or 0
|
||
out[#out+1] = {
|
||
id = p.id, name = p.name, flow = p.flow, closed = closed,
|
||
models = { total = #eff, disabled = disabledN },
|
||
accounts = { total = #accts + legacyN, enabled = enabledN + legacyN },
|
||
}
|
||
end
|
||
return { status = 200, json = { ok = true, statuses = out } }
|
||
end
|
||
|
||
function plugin.provider_set_enabled(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local enabled = args.enabled and true or false
|
||
-- 对齐参考语义：关闭 = 全关模型 + 停用全部账号；打开 = 清空模型黑名单 + 启用全部账号。
|
||
local disabled = disabledModelsOf(plat.id)
|
||
if enabled then
|
||
for k in pairs(disabled) do disabled[k] = nil end
|
||
markDirty()
|
||
for _, a in ipairs(poolList(plat.id)) do a.enabled = true poolAdd(plat.id, a) syncAccountSource(plat.id, a.id) end
|
||
-- 旧路径也启用
|
||
local legacy = plugin.state.accounts[plat.id]
|
||
local legacyTok = credentialOf("channels:" .. plat.id)
|
||
if legacy and legacyTok then
|
||
__llmsproxy_kernel.call("add_source", { source = {
|
||
name = "channels-" .. plat.id, base_url = plat.base_url, adapter = plat.adapter or "openai",
|
||
api_key = legacyTok, max_concurrent = 2,
|
||
models = (function() local ms = {} local eff = effectiveModels(plat.id)
|
||
for i, m in ipairs(eff) do ms[i] = { id = m, kind = "chat", priority = 20 } end return ms end)(),
|
||
} })
|
||
end
|
||
else
|
||
for _, m in ipairs(effectiveModels(plat.id)) do disabled[m] = true end
|
||
for _, a in ipairs(poolList(plat.id)) do a.enabled = false poolAdd(plat.id, a) dropAccountSource(plat.id, a.id) end
|
||
__llmsproxy_kernel.call("remove_source", { name = "channels-" .. plat.id })
|
||
end
|
||
logEvent("供应商" .. (enabled and "启用 " or "关闭 ") .. plat.id)
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 一键领取（对齐参考 credits.claimAll）
|
||
-- ============================================================================
|
||
function plugin.credits_claim_all(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local results = {}
|
||
local claimed = 0
|
||
for _, a in ipairs(poolList(plat.id)) do
|
||
local r = plugin.claim_daily({ platform = plat.id, account_id = a.id, credential_ref = a.credentialRef })
|
||
local ok = r.json and r.json.ok and true or false
|
||
if ok then claimed = claimed + 1 end
|
||
results[#results+1] = { accountId = a.id, outcome = ok
|
||
and { kind = "success", message = r.json.summary or tostring(r.json.upstream_status) }
|
||
or { kind = "failed", message = (r.json and r.json.error) or "失败" } }
|
||
end
|
||
-- 无池账号的走旧路径
|
||
if #poolList(plat.id) == 0 then
|
||
local r = plugin.claim_daily({ platform = plat.id })
|
||
local ok = r.json and r.json.ok and true or false
|
||
if ok then claimed = claimed + 1 end
|
||
results[#results+1] = { accountId = "legacy", outcome = ok
|
||
and { kind = "success", message = r.json.summary or tostring(r.json.upstream_status) }
|
||
or { kind = "failed", message = (r.json and r.json.error) or "失败" } }
|
||
end
|
||
return { status = 200, json = { ok = true, summary = { claimed = claimed }, results = results } }
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 备份导出/导入（对齐参考 backup.*）
|
||
-- ============================================================================
|
||
function plugin.backup_export(req)
|
||
local payload = {}
|
||
payload.version = 1
|
||
payload.exportedAt = os.time and os.time() or 0
|
||
payload.accounts = {}
|
||
payload.credentials = {}
|
||
payload.modelDisabled = plugin.state.modelDisabled or {}
|
||
payload.autoCheckin = plugin.state.settings and plugin.state.settings.auto_checkin or true
|
||
for _, p in ipairs(allPlatforms()) do
|
||
for _, a in ipairs(poolList(p.id)) do
|
||
payload.accounts[#payload.accounts+1] = a
|
||
local tok = credentialOf(a.credentialRef)
|
||
if tok then payload.credentials[a.credentialRef] = tok end
|
||
end
|
||
-- 旧路径单账号也备份
|
||
local lt = credentialOf("channels:" .. p.id)
|
||
if lt then payload.credentials["channels:" .. p.id] = lt end
|
||
end
|
||
return { status = 200, json = { ok = true, payload = payload } }
|
||
end
|
||
|
||
function plugin.backup_import(req)
|
||
local args = bodyOf(req)
|
||
local payload = args and args.payload
|
||
if type(payload) ~= "table" then return { status = 400, json = { error = "payload 必须是对象" } } end
|
||
local n = 0
|
||
-- 恢复凭据
|
||
if type(payload.credentials) == "table" then
|
||
for ref, tok in pairs(payload.credentials) do
|
||
if type(ref) == "string" and type(tok) == "string" and tok ~= "" then
|
||
__llmsproxy_secrets.set(ref, tok) n = n + 1
|
||
end
|
||
end
|
||
end
|
||
-- 恢复账号池
|
||
if type(payload.accounts) == "table" then
|
||
for _, a in ipairs(payload.accounts) do
|
||
if type(a) == "table" and a.id and a.provider then
|
||
poolAdd(tostring(a.provider), {
|
||
id = tostring(a.id), provider = tostring(a.provider),
|
||
nickname = a.nickname or a.id, enabled = a.enabled ~= false,
|
||
credentialRef = a.credentialRef or ("channels:" .. a.provider .. ":" .. a.id),
|
||
refreshable = a.refreshable or false, createdAt = a.createdAt or (os.time and os.time() or 0),
|
||
expiresAt = a.expiresAt, last_claim = 0, last_claim_status = 0, last_claim_summary = "",
|
||
})
|
||
end
|
||
end
|
||
end
|
||
-- 恢复模型黑名单
|
||
if type(payload.modelDisabled) == "table" then
|
||
plugin.state.modelDisabled = payload.modelDisabled
|
||
markDirty()
|
||
end
|
||
-- 恢复自动签到开关
|
||
if payload.autoCheckin ~= nil then
|
||
plugin.state.settings = plugin.state.settings or {}
|
||
plugin.state.settings.auto_checkin = payload.autoCheckin and true or false
|
||
end
|
||
-- 全部账号重新同步源
|
||
for _, p in ipairs(allPlatforms()) do
|
||
for _, a in ipairs(poolList(p.id)) do syncAccountSource(p.id, a.id) end
|
||
end
|
||
logEvent("备份已导入，恢复 " .. n .. " 条凭据")
|
||
return { status = 200, json = { ok = true, restored = n } }
|
||
end
|
||
|
||
-- auto_checkin 开关读写
|
||
function plugin.auto_checkin(req)
|
||
plugin.state.settings = plugin.state.settings or {}
|
||
local args = bodyOf(req)
|
||
if args.enabled ~= nil then
|
||
plugin.state.settings.auto_checkin = args.enabled and true or false
|
||
markDirty()
|
||
logEvent("自动签到" .. (plugin.state.settings.auto_checkin and "开启" or "关闭"))
|
||
end
|
||
return { status = 200, json = { ok = true, autoCheckin = plugin.state.settings.auto_checkin ~= false } }
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- 签到状态 + 逐账号余额（对齐参考 credits.status / credits.balances）
|
||
-- ============================================================================
|
||
-- fetchAccountJSON 用某账号凭据发一次请求，返回 (rec_table, nil) 或 (nil, err)。
|
||
local function fetchAccountJSON(spec, tok, credTable, plat)
|
||
local headers
|
||
-- 头钩子位：spec（checkin_status / balance）自己的优先，否则用平台级的。
|
||
-- buddy 在平台层声明一次，签到与余额复用同一套身份头。
|
||
local hfn = spec.headers_fn or (plat and plat.headers_fn)
|
||
if hfn then
|
||
local okf, h = pcall(hfn, tok, credTable or {})
|
||
if okf and type(h) == "table" then headers = h end
|
||
end
|
||
if not headers then
|
||
headers = spec.headers or { ["Authorization"] = "Bearer " .. tok, ["Content-Type"] = "application/json" }
|
||
end
|
||
local resp, err = __llmsproxy_http({
|
||
url = spec.url, method = spec.method or "GET",
|
||
headers = headers, body = spec.body,
|
||
})
|
||
if err then return nil, err end
|
||
if resp.status ~= 200 then return nil, "HTTP " .. tostring(resp.status) end
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if not ok or type(rec) ~= "table" then return nil, "响应无法解析" end
|
||
return rec, nil
|
||
end
|
||
|
||
-- credits_status：逐账号查签到状态（对齐参考 credits.status；
|
||
-- 无状态端点的平台如实返回 null，与参考对 CodeArts/LobsterAI 的处理一致）
|
||
function plugin.credits_status(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local out = {}
|
||
for _, a in ipairs(poolList(plat.id)) do
|
||
local status = nil
|
||
local cs = plat.checkin_status
|
||
if cs then
|
||
local tok = credentialOf(a.credentialRef)
|
||
if tok then
|
||
local rec, err = fetchAccountJSON(cs, tok, credentialFull(a.credentialRef), plat)
|
||
if rec and plat.checkin_status.status_fn then
|
||
local okf, st = pcall(plat.checkin_status.status_fn, rec)
|
||
if okf then status = st end
|
||
elseif err then
|
||
status = { error = err }
|
||
end
|
||
end
|
||
end
|
||
out[#out+1] = { accountId = a.id, nickname = a.nickname, status = status }
|
||
end
|
||
return { status = 200, json = { ok = true, accounts = out } }
|
||
end
|
||
|
||
-- credits_balances：逐账号查余额（对齐参考 credits.balances；
|
||
-- 无 balance 端点的平台返回 {balance=null, error="平台未声明余额端点"}，
|
||
-- 不编造数字 —— 与参考注释「不伪装成余额」同语义）
|
||
function plugin.credits_balances(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local cap = CHANNEL_CREDITS[plat.id] or {}
|
||
local out = {}
|
||
for _, a in ipairs(poolList(plat.id)) do
|
||
local entry = { accountId = a.id, balance = nil, error = nil }
|
||
local b = plat.balance
|
||
if not b then
|
||
entry.error = "平台未声明余额端点"
|
||
else
|
||
local tok = credentialOf(a.credentialRef)
|
||
if not tok then
|
||
entry.error = "无凭据"
|
||
else
|
||
local rec, err = fetchAccountJSON(b, tok, credentialFull(a.credentialRef), plat)
|
||
if err then
|
||
entry.error = err
|
||
elseif b.total_fn then
|
||
local okf, total = pcall(b.total_fn, rec)
|
||
if okf and type(total) == "number" then
|
||
entry.balance = { total = total, unit = cap.unit or "credits" }
|
||
else
|
||
entry.error = "余额解析失败"
|
||
end
|
||
end
|
||
end
|
||
end
|
||
out[#out+1] = entry
|
||
end
|
||
return { status = 200, json = { ok = true, accounts = out } }
|
||
end
|
||
|
||
-- 永久积分锁定（对齐参考 credits.permanentLock：锁定后仅使用 windowDays 内到期的积分）
|
||
function plugin.credits_permanent_lock(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
plugin.state.settings = plugin.state.settings or {}
|
||
if args.locked ~= nil then
|
||
if type(args.locked) ~= "boolean" then
|
||
return { status = 400, json = { error = "locked 必须是布尔值" } }
|
||
end
|
||
plugin.state.settings["lock_" .. plat.id] = args.locked
|
||
markDirty()
|
||
logEvent("永久积分" .. (args.locked and "锁定 " or "解除 ") .. plat.id)
|
||
end
|
||
return { status = 200, json = { ok = true, locked = plugin.state.settings["lock_" .. plat.id] == true,
|
||
windowDays = 3 } }
|
||
end
|
||
|
||
-- account.reset / resetAll：清除账号限流标记（对齐参考 account.reset）
|
||
function plugin.account_reset(req)
|
||
local args = bodyOf(req)
|
||
if args.account_id == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
if args.account_id == "__all__" then
|
||
for _, a in ipairs(poolList(plat.id)) do a.rateLimited = nil poolAdd(plat.id, a) end
|
||
return { status = 200, json = { ok = true, reset = #poolList(plat.id) } }
|
||
end
|
||
local acct = poolGet(plat.id, args and args.account_id)
|
||
if not acct then return { status = 400, json = { error = "账号不存在" } } end
|
||
acct.rateLimited = nil
|
||
poolAdd(plat.id, acct)
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- account.retest / retestAll：重测账号（对齐参考 account.retest：触发条件不同，实现同 test）
|
||
function plugin.account_retest(req)
|
||
local args = bodyOf(req)
|
||
if args.account_id == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
if args.account_id == "__all__" then
|
||
local results = {}
|
||
for _, a in ipairs(poolList(plat.id)) do
|
||
local r = plugin.account_test({ platform = plat.id, account_id = a.id })
|
||
results[#results+1] = { accountId = a.id, ok = r.json and r.json.ok and true or false,
|
||
error = r.json and r.json.error or nil }
|
||
end
|
||
return { status = 200, json = { ok = true, results = results } }
|
||
end
|
||
return plugin.account_test({ platform = plat.id, account_id = args.account_id })
|
||
end
|
||
|
||
-- model.setDisabledMany：批量开关（对齐参考 model.setDisabledMany）
|
||
function plugin.model_set_disabled_many(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local ids = args and args.model_ids
|
||
if type(ids) ~= "table" then return { status = 400, json = { error = "model_ids 必须是数组" } } end
|
||
local disabled = disabledModelsOf(plat.id)
|
||
for _, mid in ipairs(ids) do
|
||
if args.disabled then disabled[tostring(mid)] = true else disabled[tostring(mid)] = nil end
|
||
end
|
||
markDirty()
|
||
for _, a in ipairs(poolList(plat.id)) do syncAccountSource(plat.id, a.id) end
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- model.clearDead：清死模型（对齐参考 model.clearDead：从黑名单移除已下线的 id）
|
||
function plugin.model_clear_dead(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local disabled = disabledModelsOf(plat.id)
|
||
local removed = {}
|
||
for mid in pairs(disabled) do
|
||
local alive = false
|
||
for _, m in ipairs(effectiveModels(plat.id)) do if m == mid then alive = true break end end
|
||
if not alive then disabled[mid] = nil removed[#removed+1] = mid end
|
||
end
|
||
markDirty()
|
||
for _, a in ipairs(poolList(plat.id)) do syncAccountSource(plat.id, a.id) end
|
||
return { status = 200, json = { ok = true, removed = removed } }
|
||
end
|
||
|
||
-- 供应商排序（对齐参考 provider.getOrder/setOrder）
|
||
function plugin.provider_get_order(req)
|
||
local order = plugin.state.providerOrder
|
||
if type(order) ~= "table" then order = {} end
|
||
return { status = 200, json = { ok = true, order = order } }
|
||
end
|
||
|
||
function plugin.provider_set_order(req)
|
||
local args = bodyOf(req)
|
||
local order = args and args.order
|
||
if type(order) ~= "table" then return { status = 400, json = { error = "order 必须是字符串数组" } } end
|
||
local cleaned = {}
|
||
for _, id in ipairs(order) do
|
||
if platformById(tostring(id)) then cleaned[#cleaned+1] = tostring(id) end
|
||
end
|
||
plugin.state.providerOrder = cleaned
|
||
markDirty()
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- 网关开关（对齐参考 gateway.getEnabled/setEnabled：本插件的一个上游源面开关）
|
||
-- 这里网关开关语义=channels 提供的源是否参与调度；用 set_plugin_enabled 内核动作
|
||
-- 不合适（那是插件级），我们用「全部模型黑名单+全部账号停用」已由 provider_set_enabled
|
||
-- 承担，这里改为读取当前接入状态做查询、写入复用 provider_set_enabled。
|
||
function plugin.gateway_get_enabled(req)
|
||
local any = false
|
||
for _, p in ipairs(allPlatforms()) do
|
||
local disabled = disabledModelsOf(p.id)
|
||
local total = #effectiveModels(p.id)
|
||
local allOff = total > 0
|
||
for _, m in ipairs(effectiveModels(p.id)) do if not disabled[m] then allOff = false break end end
|
||
if not allOff then any = true break end
|
||
end
|
||
return { status = 200, json = { ok = true, enabled = any,
|
||
apiKey = nil, address = nil, models = { source = "channels" } } }
|
||
end
|
||
|
||
function plugin.gateway_set_enabled(req)
|
||
local args = bodyOf(req)
|
||
if type(args.enabled) ~= "boolean" then
|
||
return { status = 400, json = { error = "非空布尔 enabled 必填" } }
|
||
end
|
||
-- 全平台整体开关（复用 provider_set_enabled 语义）
|
||
for _, p in ipairs(allPlatforms()) do
|
||
plugin.provider_set_enabled({ platform = p.id, enabled = args.enabled })
|
||
end
|
||
logEvent("网关整体" .. (args.enabled and "开启" or "关闭"))
|
||
return { status = 200, json = { ok = true } }
|
||
end
|
||
|
||
-- backup.status：备份健康度（对齐参考 backup.status：账号数/无过期时间账号数）
|
||
function plugin.backup_status(req)
|
||
local total, noExpiry = 0, 0
|
||
for _, p in ipairs(allPlatforms()) do
|
||
for _, a in ipairs(poolList(p.id)) do
|
||
total = total + 1
|
||
if a.expiresAt == nil then noExpiry = noExpiry + 1 end
|
||
end
|
||
end
|
||
return { status = 200, json = { ok = true, accounts = total, withoutExpiry = noExpiry } }
|
||
end
|
||
|
||
-- usage.tokenLedger：本网关的 token 用量快照（对齐参考 usage.tokenLedger）。
|
||
-- 数据源：网关 /api/stats（插件走回环取，与 usage 插件同思路）。
|
||
function plugin.usage_token_ledger(req)
|
||
local args = bodyOf(req)
|
||
local limit = tonumber(args and args.limit) or 50
|
||
local key = (req and req.key) or ""
|
||
local url = "http://127.0.0.1:8081/api/stats?period=all&limit=" .. tostring(limit)
|
||
if key ~= "" then
|
||
url = url .. "&key=" .. (key:len() <= 6 and key or ("***" .. key:sub(-6)))
|
||
end
|
||
local resp, err = __llmsproxy_http({ url = url, method = "GET", timeout_ms = 4000 })
|
||
if err or not resp or resp.status ~= 200 then
|
||
return { status = 200, json = { ok = true, snapshot = { available = false,
|
||
error = err or (resp and tostring(resp.status) or "no response") } } }
|
||
end
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if not ok or type(rec) ~= "table" then
|
||
return { status = 200, json = { ok = true, snapshot = { available = false, error = "stats 无法解析" } } }
|
||
end
|
||
-- 汇总 token 总量（兼容 stats 的不同形状）
|
||
local prompt, completion, requests = 0, 0, 0
|
||
local rows = rec.requests or rec.rows or rec.data or {}
|
||
if type(rows) == "table" then
|
||
for _, r in ipairs(rows) do
|
||
if type(r) == "table" then
|
||
prompt = prompt + (tonumber(r.prompt_tokens) or 0)
|
||
completion = completion + (tonumber(r.completion_tokens) or 0)
|
||
requests = requests + 1
|
||
end
|
||
end
|
||
end
|
||
return { status = 200, json = { ok = true, snapshot = { available = true,
|
||
tokens = { prompt = prompt, completion = completion, total = prompt + completion },
|
||
requests = requests, raw = rec } } }
|
||
end
|
||
|
||
-- usage.badge：渠道徽标（对齐参考 usage.badge；用 credits_balances 的汇总）
|
||
function plugin.usage_badge(req)
|
||
local args = bodyOf(req)
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "provider 不能为空" } } end
|
||
local j = plugin.credits_balances({ platform = plat.id })
|
||
local accounts = asArrLua(j.json and j.json.accounts)
|
||
local total, known = 0, false
|
||
for _, a in ipairs(accounts) do
|
||
if type(a.balance) == "table" and type(a.balance.total) == "number" then
|
||
total = total + a.balance.total
|
||
known = true
|
||
end
|
||
end
|
||
return { status = 200, json = { ok = true, badge = known
|
||
and { kind = "credits", total = total, unit = (CHANNEL_CREDITS[plat.id] or {}).unit or "credits" }
|
||
or { kind = "unavailable" } } }
|
||
end
|
||
|
||
-- usage.badgePreference：徽标显示偏好（读/写，全局一个；非法值拒绝不回落）
|
||
function plugin.usage_badge_preference(req)
|
||
plugin.state.settings = plugin.state.settings or {}
|
||
local args = bodyOf(req)
|
||
if args.preference ~= nil then
|
||
local valid = { auto = true, subscription = true, credits = true }
|
||
if not valid[args.preference] then
|
||
return { status = 400, json = { error = "preference 必须是 auto/subscription/credits 之一" } }
|
||
end
|
||
plugin.state.settings.badge_preference = args.preference
|
||
end
|
||
return { status = 200, json = { ok = true, preference = plugin.state.settings.badge_preference or "auto" } }
|
||
end
|
||
|
||
-- onboarding.status / claim：新人任务（对齐参考 onboarding.*；仅 raccoon 有实测端点）
|
||
function plugin.onboarding_status(req)
|
||
local args = bodyOf(req)
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local ob = plat.onboarding
|
||
if not ob then
|
||
return { status = 200, json = { ok = true, supported = false,
|
||
message = plat.name .. " 未声明新人任务端点（参考实现同样如实返回 null）" } }
|
||
end
|
||
-- 已领取判定：查 state
|
||
local claimed = plugin.state.settings and plugin.state.settings["onboard_" .. plat.id] == true
|
||
return { status = 200, json = { ok = true, supported = true,
|
||
tasks = { desktop_login_reward = claimed }, earned = claimed and ob.reward_points or 0,
|
||
total = ob.reward_points } }
|
||
end
|
||
|
||
function plugin.onboarding_claim(req)
|
||
local args = bodyOf(req)
|
||
local plat = platformById(args and args.platform)
|
||
if not plat or not plat.onboarding then
|
||
return { status = 400, json = { error = "该平台无新人任务" } }
|
||
end
|
||
-- raccoon 实测端点：POST {apiBase}/login/points/grant
|
||
local tok = credentialOf("channels:" .. plat.id)
|
||
if not tok then return { status = 400, json = { error = "未登录" } } end
|
||
local resp, err = __llmsproxy_http({
|
||
url = plat.base_url .. "/login/points/grant", method = "POST",
|
||
headers = { ["Authorization"] = "Bearer " .. tok, ["Content-Type"] = "application/json" },
|
||
body = "{}",
|
||
})
|
||
if err then return { status = 400, json = { error = err } } end
|
||
if resp.status ~= 200 then return { status = 400, json = { error = "HTTP " .. tostring(resp.status) } } end
|
||
plugin.state.settings = plugin.state.settings or {}
|
||
plugin.state.settings["onboard_" .. plat.id] = true
|
||
logEvent("新人奖励已领 " .. plat.id)
|
||
return { status = 200, json = { ok = true, points = plat.onboarding.reward_points } }
|
||
end
|
||
|
||
-- asArrLua（Lua 侧的空表规整）：桥接层 Go→Lua 不涉及，但 handler 内部把
|
||
-- credits_balances 的 json.accounts 再传给别的 handler 时要能处理空表。
|
||
function asArrLua(t)
|
||
if type(t) ~= "table" then return {} end
|
||
if #t > 0 then return t end
|
||
return {}
|
||
end
|
||
|
||
function plugin.set_endpoints(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local allowed = { base_url = true, login_url = true }
|
||
local changed = {}
|
||
for k in pairs(allowed) do
|
||
if args[k] then plat[k] = tostring(args[k]) changed[#changed+1] = k end
|
||
end
|
||
if type(args.callback) == "table" and plat.callback then
|
||
for _, k in ipairs({ "mode", "token_url" }) do
|
||
if args.callback[k] then
|
||
plat.callback[k] = tostring(args.callback[k])
|
||
changed[#changed+1] = "callback." .. k
|
||
end
|
||
end
|
||
end
|
||
-- client_version：有道 exchange/续期/签到的必填版本号来源。测试需把它指到假上游；
|
||
-- 同时清掉已缓存值（否则上一次测试的值会跨用例泄漏）。
|
||
if type(args.client_version) == "table" and plat.client_version then
|
||
for _, k in ipairs({ "url", "path", "fallback" }) do
|
||
if args.client_version[k] then
|
||
plat.client_version[k] = tostring(args.client_version[k])
|
||
changed[#changed+1] = "client_version." .. k
|
||
end
|
||
end
|
||
plugin.state.clientVersion = nil
|
||
end
|
||
if type(args.models_remote) == "table" and plat.models_remote then
|
||
-- 测试台/运维把远端目录端点重定向（键形如 endpoint0/endpoint1 对应该平台的
|
||
-- 第 N 个端点）。生产上不该改，但没有它就无法在无网环境下断言解析口径。
|
||
for i, ep in ipairs(plat.models_remote.endpoints or {}) do
|
||
local v = args.models_remote["endpoint" .. (i - 1)]
|
||
if v then
|
||
ep.url = tostring(v)
|
||
changed[#changed+1] = "models_remote.endpoint" .. (i - 1)
|
||
end
|
||
end
|
||
end
|
||
if type(args.qr) == "table" and plat.qr then
|
||
for _, k in ipairs({ "api_base", "auth_prefix", "poll_path", "login_page", "app_name" }) do
|
||
if args.qr[k] then
|
||
plat.qr[k] = tostring(args.qr[k])
|
||
changed[#changed+1] = "qr." .. k
|
||
end
|
||
end
|
||
end
|
||
if type(args.wechat) == "table" and plat.wechat then
|
||
for _, k in ipairs({ "auth_url", "qr_url", "poll_url", "account_base",
|
||
"bind_path", "user_agent", "access_key_id", "access_key_secret", "app_id" }) do
|
||
if args.wechat[k] then
|
||
plat.wechat[k] = tostring(args.wechat[k])
|
||
changed[#changed+1] = "wechat." .. k
|
||
end
|
||
end
|
||
end
|
||
if type(args.initpoll) == "table" and plat.initpoll then
|
||
for _, k in ipairs({ "init_url", "poll_url", "provider", "origin" }) do
|
||
if args.initpoll[k] then
|
||
plat.initpoll[k] = tostring(args.initpoll[k])
|
||
changed[#changed+1] = "initpoll." .. k
|
||
end
|
||
end
|
||
end
|
||
if type(args.device) == "table" and plat.device then
|
||
for _, k in ipairs({ "code_url", "token_url" }) do
|
||
if args.device[k] then plat.device[k] = tostring(args.device[k]) changed[#changed+1] = "device." .. k end
|
||
end
|
||
end
|
||
if type(args.register) == "table" and plat.register then
|
||
for _, k in ipairs({ "url" }) do
|
||
if args.register[k] then plat.register[k] = tostring(args.register[k]) changed[#changed+1] = "register." .. k end
|
||
end
|
||
end
|
||
if type(args.state) == "table" and plat.state then
|
||
for _, k in ipairs({ "state_url", "token_url", "account_url" }) do
|
||
if args.state[k] then plat.state[k] = tostring(args.state[k]) changed[#changed+1] = "state." .. k end
|
||
end
|
||
end
|
||
if type(args.checkin) == "table" and plat.checkin then
|
||
for _, k in ipairs({ "url" }) do
|
||
if args.checkin[k] then plat.checkin[k] = tostring(args.checkin[k]) changed[#changed+1] = "checkin." .. k end
|
||
end
|
||
end
|
||
-- checkin_status / balance：声明式端点覆盖。参考把各平台的计费/状态端点当
|
||
-- 产品配置，运维要能整体改指（自建代理、镜像、测试假上游）。此前只覆盖了
|
||
-- 旧的 plat.checkin，buddy 这类"声明 checkin_status/balance"的平台无从覆盖 ——
|
||
-- 自动化测试也就无法把它们的端点指到假上游。
|
||
if type(args.checkin_status) == "table" and plat.checkin_status then
|
||
for _, k in ipairs({ "url", "method", "body" }) do
|
||
if args.checkin_status[k] then
|
||
plat.checkin_status[k] = tostring(args.checkin_status[k])
|
||
changed[#changed+1] = "checkin_status." .. k
|
||
end
|
||
end
|
||
end
|
||
if type(args.balance) == "table" and plat.balance then
|
||
for _, k in ipairs({ "url", "method", "body" }) do
|
||
if args.balance[k] then
|
||
plat.balance[k] = tostring(args.balance[k])
|
||
changed[#changed+1] = "balance." .. k
|
||
end
|
||
end
|
||
end
|
||
if type(args.callback) == "table" and plat.callback then
|
||
for _, k in ipairs({ "exchange_url" }) do
|
||
if args.callback[k] then plat.callback[k] = tostring(args.callback[k]) changed[#changed+1] = "callback." .. k end
|
||
end
|
||
end
|
||
if #changed == 0 then return { status = 400, json = { error = "无可识别的端点字段" } } end
|
||
logEvent("端点已改写 " .. plat.id .. ": " .. table.concat(changed, ","))
|
||
return { status = 200, json = { ok = true, changed = changed } }
|
||
end
|
||
|
||
function plugin.list_platforms(req)
|
||
local out = {}
|
||
for _, p in ipairs(allPlatforms()) do
|
||
local acct = accountOf(p.id) or {}
|
||
local has = credentialOf("channels:" .. p.id)
|
||
out[#out + 1] = {
|
||
id = p.id, name = p.name, flow = p.flow,
|
||
logged_in = has ~= nil,
|
||
account = acct.account,
|
||
enabled = acct.enabled,
|
||
last_claim = acct.last_claim,
|
||
}
|
||
end
|
||
return { status = 200, json = { platforms = out } }
|
||
end
|
||
|
||
-- inject_platforms：**运行时**注入平台定义（测试夹具 / 运维扩展）。
|
||
--
|
||
-- 为何存在：测试夹具（打 example.com 的假平台、验证各 flow 的占位平台）
|
||
-- 绝不能写成生产源码 —— PLATFORMS 会被 UI/status/list_platforms 直接展示，
|
||
-- 夹具内联进去就是「生产 UI 里实际出现 4 个假平台」（真实踩过）。
|
||
-- 正确分层：生产目录只留真实厂商，夹具由测试运行时注入。
|
||
--
|
||
-- 语义：整表替换（与 set_endpoints 的按字段覆盖不同）—— 注入是声明式的
|
||
-- “这就是本轮我要用的目录”，避免测试之间残留状态。传空数组即清空。
|
||
-- 容量上限：注入属于运维/测试能力，不承担生产目录职责，限 32 条够用。
|
||
local INJECT_PLATFORM_LIMIT = 32
|
||
-- ============================================================================
|
||
-- 服务端浏览器栈的运维面（依赖预检 / 取凭据 / 停栈）
|
||
-- ============================================================================
|
||
|
||
-- deps_status：如实报告浏览器栈缺什么依赖。插件**不擅自**安装系统包（需要 root
|
||
-- 且会改动运维的机器）；如实报告 + 给出安装命令，由运维或 deploy.sh 执行。
|
||
function plugin.deps_status(req)
|
||
local d = browserDeps()
|
||
local list = {}
|
||
for _, m in ipairs(d.missing) do
|
||
list[#list + 1] = { bin = m.bin, pkg = m.pkg, why = m.why }
|
||
end
|
||
return { status = 200, json = {
|
||
ok = d.ok,
|
||
missing = list,
|
||
present = d.present,
|
||
chromium = d.chromium,
|
||
novnc = d.novnc,
|
||
-- 安装入口：发行包自带脚本（识别 apt/dnf/yum/apk），插件**不执行**它
|
||
-- （装系统包需要 root，且 chromium 是安全面较大的组件，不该由插件代劳）。
|
||
install_hint = d.ok and "" or
|
||
"sudo bash /usr/share/llmsproxy/install-browser-stack.sh"
|
||
.. " 或沿源码部署时： sudo bash packaging/install-browser-stack.sh"
|
||
.. "（脚本会自动识别 apt/dnf/yum/apk；也可手工装 Xvfb x11vnc websockify noVNC chromium python3-websocket）",
|
||
} }
|
||
end
|
||
|
||
-- collect_credentials：从**运行中的**服务端浏览器取凭据（CDP）。
|
||
--
|
||
-- 为什么需要它：VNC 只把浏览器呈现给人，登录完成后必须把结果**取出来**才能
|
||
-- 变成上游源。取法分两种：
|
||
-- ① 平台声明了 collect_expr —— 在该页上求值该 JS（返回 token 字符串或对象）
|
||
-- ② 未声明 —— 回退到通用提取：localStorage / sessionStorage / cookie 全量
|
||
-- 查到什么存什么，由调用方/运维判断哪个是凭据（不猜语义，不编造）。
|
||
-- 取到的凭据经 complete_login 走正常入库路径（含 account_id → 池路径）。
|
||
function plugin.collect_credentials(req)
|
||
local args = bodyOf(req)
|
||
if args.platform == nil then args = req end
|
||
local plat = platformById(args and args.platform)
|
||
if not plat then return { status = 400, json = { error = "未知平台" } } end
|
||
local b = browserStack()
|
||
if not b.session then return { status = 400, json = { error = "没有运行中的浏览器会话" } } end
|
||
local cdp = b.session.cdp
|
||
if not cdp then return { status = 400, json = { error = "浏览器会话未启用 CDP" } } end
|
||
|
||
local expr = (args and args.expr) or plat.collect_expr
|
||
local value, err
|
||
if expr then
|
||
value, err = cdpEval(cdp, expr)
|
||
if err then return { status = 400, json = { error = "取值失败: " .. err } } end
|
||
end
|
||
|
||
-- 通用提取：无论有无 collect_expr 都跑一遍，作为兜底与补充。
|
||
local generic, gerr = cdpEval(cdp, [[
|
||
(function(){
|
||
var out = {localStorage:{}, sessionStorage:{}, cookie:document.cookie, url:location.href};
|
||
try { for (var i=0;i<localStorage.length;i++){var k=localStorage.key(i);out.localStorage[k]=localStorage.getItem(k);} } catch(e){}
|
||
try { for (var i=0;i<sessionStorage.length;i++){var k=sessionStorage.key(i);out.sessionStorage[k]=sessionStorage.getItem(k);} } catch(e){}
|
||
return JSON.stringify(out);
|
||
})()
|
||
]])
|
||
|
||
local rec = {}
|
||
if value ~= nil then
|
||
if type(value) == "table" then
|
||
for k, v in pairs(value) do rec[k] = v end
|
||
else
|
||
rec.collected = value
|
||
end
|
||
end
|
||
if generic then
|
||
local ok, parsed = pcall(json.decode, generic)
|
||
if ok and type(parsed) == "table" then
|
||
rec.browser = parsed
|
||
-- 常见位置的启发式提取（找到就用，找不到不强求）
|
||
local ls = parsed.localStorage or {}
|
||
for _, k in ipairs({ "token", "access_token", "accessToken", "auth_token", "jwt", "id_token", "Authorization" }) do
|
||
if type(ls[k]) == "string" and ls[k] ~= "" and rec.token == nil then rec.token = ls[k] end
|
||
end
|
||
local ss = parsed.sessionStorage or {}
|
||
for _, k in ipairs({ "token", "access_token", "accessToken", "auth_token", "jwt", "id_token" }) do
|
||
if type(ss[k]) == "string" and ss[k] ~= "" and rec.token == nil then rec.token = ss[k] end
|
||
end
|
||
if rec.token == nil and type(parsed.cookie) == "string" then
|
||
rec.token = parsed.cookie:match("(access_token=[^;]+)")
|
||
or parsed.cookie:match("(token=[^;]+)")
|
||
end
|
||
end
|
||
elseif gerr then
|
||
rec.generic_error = gerr
|
||
end
|
||
|
||
if next(rec) == nil then
|
||
return { status = 200, json = { ok = false, error = "没有取到任何凭据（登录是否真的完成了？）" } }
|
||
end
|
||
-- 不自动入库：取到什么原样返回，由调用方确认后再 complete_login。
|
||
-- 自动写入会把"页面上恰好存在的某个 token"当成凭据，那是最糟的猜测。
|
||
return { status = 200, json = { ok = true, collected = rec } }
|
||
end
|
||
|
||
-- stop_browser：回收服务端浏览器栈（会话结束/用户放弃时）。
|
||
function plugin.stop_browser(req)
|
||
local had = browserStack().session ~= nil
|
||
reapBrowser()
|
||
if had then logEvent("服务端浏览器已回收") end
|
||
return { status = 200, json = { ok = true, stopped = had } }
|
||
end
|
||
|
||
-- browser_status：当前浏览器会话状态（给 UI 显示）。
|
||
function plugin.browser_status(req)
|
||
local b = browserStack()
|
||
local s = b.session
|
||
return { status = 200, json = { ok = true, running = s ~= nil, session = s } }
|
||
end
|
||
|
||
function plugin.inject_platforms(req)
|
||
local args = bodyOf(req)
|
||
if args.platforms == nil then args = req end
|
||
local list = args and (args.platforms or args.items)
|
||
if type(list) ~= "table" then
|
||
return { status = 400, json = { error = "platforms 必须是数组" } }
|
||
end
|
||
if #list > INJECT_PLATFORM_LIMIT then
|
||
return { status = 400, json = { error = "最多注入 " .. INJECT_PLATFORM_LIMIT .. " 个平台" } }
|
||
end
|
||
-- 校验：每条必须有 id，且不得与内建目录重名（注入不能劫持真实厂商）。
|
||
local builtin = {}
|
||
for _, p in ipairs(PLATFORMS) do builtin[p.id] = true end
|
||
local clean, seen = {}, {}
|
||
for _, p in ipairs(list) do
|
||
if type(p) ~= "table" or type(p.id) ~= "string" or p.id == "" then
|
||
return { status = 400, json = { error = "每个平台必须有 id" } }
|
||
end
|
||
if builtin[p.id] then
|
||
return { status = 400, json = { error = "不得覆盖内建平台: " .. p.id } }
|
||
end
|
||
if seen[p.id] then
|
||
return { status = 400, json = { error = "重复的 id: " .. p.id } }
|
||
end
|
||
seen[p.id] = true
|
||
clean[#clean + 1] = p
|
||
end
|
||
plugin.state.injected_platforms = clean
|
||
markDirty()
|
||
if #clean == 0 then
|
||
logEvent("已清空注入平台")
|
||
else
|
||
local ids = {}
|
||
for _, p in ipairs(clean) do ids[#ids + 1] = p.id end
|
||
logEvent("已注入平台 " .. #clean .. " 个: " .. table.concat(ids, ","))
|
||
end
|
||
return { status = 200, json = { ok = true, injected = #clean } }
|
||
end
|
||
|
||
function plugin.status_page(req)
|
||
local r = __llmsproxy_kernel.call("status", {})
|
||
return { status = 200, json = {
|
||
accounts = plugin.state.accounts,
|
||
log = plugin.state.log,
|
||
kernel_ready = r and r.ready or false,
|
||
} }
|
||
end
|
||
|
||
-- oauth_callback 处理平台重定向：校验 nonce，然后按平台的 callback 模式解析。
|
||
--
|
||
-- nonce 校验是必需的：没有它，别人构造一个回调就能把**自己的**凭据塞进
|
||
-- 这个网关的登录流程。
|
||
--
|
||
-- callback 模式（platform.callback.mode）决定如何从回调 query 解出凭据：
|
||
-- nil/"code" 标准 OAuth：直接把 code 当凭据交给 complete_login。
|
||
-- "trae" 字节 TRAE 的 token 直传形态，解析逐字对齐参考实现
|
||
-- parseTraeCallbackDetailed + exchangeTraeCallback（见 traeCallback）。
|
||
function plugin.oauth_callback(req)
|
||
local nonce = req.query and req.query.state
|
||
if not nonce or nonce == "" then
|
||
return { status = 400, body = "missing state" }
|
||
end
|
||
sweepSessions()
|
||
local s = nil
|
||
for _, sess in pairs(sessions()) do
|
||
if sess.nonce == nonce then s = sess break end
|
||
end
|
||
if not s then
|
||
return { status = 400, body = "unknown or expired login session" }
|
||
end
|
||
if s.flow ~= "callback" then
|
||
return { status = 400, body = "session is not a callback flow" }
|
||
end
|
||
if s.state ~= "pending" then
|
||
return { status = 409, body = "login session already consumed" }
|
||
end
|
||
local plat = platformById(s.platform)
|
||
local cb = plat and plat.callback or {}
|
||
local mode = cb.mode or "code"
|
||
|
||
local credential, account, cerr
|
||
if mode == "trae" then
|
||
credential, account, cerr = traeCallback(plat, req.query, s)
|
||
elseif mode == "code" and s.platform == "lobsterai" then
|
||
-- 与 poll_login 的 loopback 路径共用同一个交换助手，避免两条路漂移。
|
||
credential, account, cerr = lobsteraiExchange(plat, req.query.authCode or req.query.code, s)
|
||
elseif mode == "code" and cb.token_url then
|
||
-- 标准 OAuth code → token 交换（Gemini / LobsterAI）。凭据是交换回的 access_token。
|
||
local code = req.query.code
|
||
if not code or code == "" then
|
||
cerr = "missing code"
|
||
else
|
||
local body = (cb.token_body or "")
|
||
:gsub("{code}", code)
|
||
:gsub("{verifier}", s.device_verifier or "")
|
||
-- {now}/{uuid}：LobsterAI 的交换体要求这两个字段（照参考
|
||
-- exchangeLobsteraiAuthCode：latestKeyfrom 取当前时刻、uuid 来自会话）。
|
||
:gsub("{now}", tostring(os.time and os.time() * 1000 or 0))
|
||
:gsub("{uuid}", s.nonce or "")
|
||
-- {port}：Gemini 的 redirect_uri 参与 token 交换校验，必须与授权时一致
|
||
:gsub("{port}", tostring(gatewayPort()))
|
||
-- Content-Type 按请求体形态选：LobsterAI 发 JSON，Gemini 发表单。
|
||
local ctype = "application/x-www-form-urlencoded"
|
||
if body:sub(1, 1) == "{" then ctype = "application/json" end
|
||
local hdrs = { ["Content-Type"] = ctype, ["Accept"] = "application/json" }
|
||
-- 平台的匿名头（LobsterAI 的交换端点虽不需 Authorization，但要 UA）
|
||
if type(plat.callback_headers) == "table" then
|
||
for k, v in pairs(plat.callback_headers) do hdrs[k] = v end
|
||
end
|
||
local resp, err = __llmsproxy_http({
|
||
url = cb.token_url,
|
||
method = "POST",
|
||
headers = hdrs,
|
||
body = body,
|
||
})
|
||
if err then
|
||
cerr = "token 交换失败: " .. err
|
||
elseif resp.status ~= 200 then
|
||
cerr = "token 交换失败（HTTP " .. tostring(resp.status) .. "）"
|
||
else
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if not ok or type(rec) ~= "table" or not rec.access_token then
|
||
cerr = "token 交换响应缺少 access_token"
|
||
else
|
||
credential = rec.access_token
|
||
account = "oauth"
|
||
end
|
||
end
|
||
end
|
||
else
|
||
credential = req.query.code
|
||
account = "oauth"
|
||
if not credential or credential == "" then cerr = "missing code" end
|
||
end
|
||
if cerr then
|
||
s.state = "failed"
|
||
s.message = cerr
|
||
return { status = 400, body = cerr }
|
||
end
|
||
|
||
-- 与 poll_login 的两条完成分支同一纪律：页面流程先建了占位账号
|
||
-- （credentialRef=channels:<plat>:<aid>），完成时必须带 account_id，
|
||
-- 否则凭据落到与占位账号无关的 `channels:<plat>` 键 → 池账号永远
|
||
-- has_credential=false（同一缺陷在 callback 路径的漏网）。
|
||
local res = plugin.complete_login({ platform = s.platform, credential = credential,
|
||
account = account, account_id = s.account_id })
|
||
if res.json and res.json.error then
|
||
return { status = 400, body = res.json.error }
|
||
end
|
||
s.state = "completed"
|
||
s.account = account
|
||
return { status = 200, body = "ok" }
|
||
end
|
||
|
||
-- traeCallback 解析 TRAE 的 token 直传回调并（必要时）走 ExchangeToken。
|
||
-- 返回 (credential, account, err)。
|
||
--
|
||
-- credential 是 **JSON**（不是裸 access token）：device_id 必须随凭据保存，
|
||
-- 因为签到要发 `X-Device-Id`，且该值限定为「每账号互不相同」（同一天两账号
|
||
-- 共用会被「该设备已签到」拦，业务码 9074 的限流范围是 device_id 而非账号）。
|
||
-- 参考 TraeCredential 即含 deviceId/machineId。凭据的取用端 credentialOf 会
|
||
-- 从中取 access_token，故包成 JSON 不影响上游源。
|
||
--
|
||
-- 行为逐行对齐参考实现 trae-oauth.ts：
|
||
-- refreshToken（query 或 userJwt.RefreshToken 回退）存在 → ExchangeToken 换新
|
||
-- access（并轮换 refreshToken）；凭据 = 新 access。
|
||
-- 无 refreshToken 但有 userJwt.Token → 直接用它兜底（不走 ExchangeToken）。
|
||
-- 二者皆无、但有 code/authCodeInfo → **PKCE 流**，明确报"暂不支持"而非含糊失败。
|
||
-- 都没有 → 回调无效。
|
||
local function jsonField(raw, key)
|
||
if not raw or raw == "" then return "" end
|
||
local ok, v = pcall(json.decode, raw)
|
||
if not ok or type(v) ~= "table" then return "" end
|
||
return v[key] or ""
|
||
end
|
||
|
||
traeCallback = function(plat, q, s)
|
||
q = q or {}
|
||
local userJwt = q.userJwt or ""
|
||
local refreshToken = q.refreshToken
|
||
if not refreshToken or refreshToken == "" then
|
||
refreshToken = jsonField(userJwt, "RefreshToken")
|
||
end
|
||
local jwtToken = jsonField(userJwt, "Token")
|
||
-- uid 与昵称都必须从 userInfo 取：uid 是签到设备身份的**派生种子**
|
||
-- （参考 trae-oauth.ts：回调字段名是 UserID，不是 user_id）；
|
||
-- 昵称需经乱码修复（中文实测会变成 Óû§8847309959 这类形态）。
|
||
local userInfo = q.userInfo or ""
|
||
local uid = jsonField(userInfo, "UserID")
|
||
local enterpriseId = jsonField(userInfo, "TenantID")
|
||
local account = traeFixNickname(jsonField(userInfo, "ScreenName"), uid)
|
||
if account == "" then account = "trae" end
|
||
|
||
-- PKCE 形态探测：仅在 refreshToken / jwtToken 都空时才判，与参考一致。
|
||
local authCode = q.code or q.authCode or jsonField(q.authCodeInfo or "", "code")
|
||
|
||
if (not refreshToken or refreshToken == "") and (not jwtToken or jwtToken == "") then
|
||
if authCode and authCode ~= "" then
|
||
return nil, nil, "上游返回了 PKCE 授权码（code/authCodeInfo），本实现暂不支持该流程"
|
||
end
|
||
return nil, nil, "回调未携带 refreshToken / userJwt.Token / code"
|
||
end
|
||
|
||
-- 凭据包成 JSON：device_id/machine_id 必须留存供签到用（见函数注释）。
|
||
local function packTrae(access)
|
||
local cred = { access_token = access, uid = uid, enterprise_id = enterpriseId,
|
||
nickname = account }
|
||
if s then
|
||
cred.device_id = s.device_id
|
||
cred.machine_id = s.machine_id
|
||
cred.login_trace_id = s.login_trace_id
|
||
end
|
||
return json.encode(cred)
|
||
end
|
||
|
||
-- 分支 1：有 refreshToken → ExchangeToken 换新 access（轮换 refresh）
|
||
if refreshToken and refreshToken ~= "" and plat.callback.exchange_url then
|
||
local body = (plat.callback.exchange_body
|
||
:gsub("{client_id}", plat.callback.client_id or "")
|
||
:gsub("{refresh_token}", refreshToken))
|
||
local resp, err = __llmsproxy_http({
|
||
url = plat.callback.exchange_url,
|
||
method = "POST",
|
||
headers = { ["Content-Type"] = "application/json", ["Accept"] = "application/json" },
|
||
body = body,
|
||
})
|
||
if err then return nil, nil, "TRAE ExchangeToken 失败: " .. err end
|
||
if resp.status ~= 200 then
|
||
return nil, nil, "TRAE ExchangeToken HTTP " .. tostring(resp.status)
|
||
end
|
||
local ok, rec = pcall(json.decode, resp.body or "")
|
||
if not ok or type(rec) ~= "table" then
|
||
return nil, nil, "TRAE ExchangeToken 响应无法解析"
|
||
end
|
||
local access = rec.Token or rec.token or rec.AccessToken or rec.access_token
|
||
if not access or access == "" then
|
||
return nil, nil, "TRAE ExchangeToken 响应缺少 Token"
|
||
end
|
||
return packTrae(access), account, nil
|
||
end
|
||
|
||
-- 分支 2：无 refreshToken，用 userJwt.Token 兜底
|
||
if jwtToken and jwtToken ~= "" then return packTrae(jwtToken), account, nil end
|
||
return nil, nil, "回调未携带可用的 token"
|
||
end
|
||
|
||
-- traeDeriveStream(seed, salt, nbytes)：SHA-256 确定性伪随机流（返回 hex 串）。
|
||
--
|
||
-- 逐行对齐参考 seededStream：`SHA256(utf8(salt:seed) ++ counterBE32)` 串联，
|
||
-- counter 从 0 递增，取前 nbytes 字节。同样的 (seed,salt) 永远得到同样的字节。
|
||
-- 内核只给 sha256_hex(字符串)，没有二进制原语，故自己拼大端 counter：
|
||
-- 把计数器按 4 字节大端拆成字符，先 tohex 再转义成逐字节的字面量。
|
||
local function traeDeriveStream(seed, salt, nbytes)
|
||
local prefix = tostring(salt) .. ":" .. tostring(seed)
|
||
local out, counter = "", 0
|
||
while #out < nbytes * 2 do
|
||
-- counter 是大端 4 字节；counter=0 时就是 4 个 NUL。
|
||
-- 必须用 string.char 造**真字节**：内核的 sha256_hex 经 GoStringN 按长度取串，
|
||
-- NUL 会原样保留。曾经试过用 `\\ddd` 转义串，那是错的 —— Lua 不会对
|
||
-- 运行时拼接的字符串重新词法分析，于是哈希到的是「反斜杠+数字」文本。
|
||
local be = string.char(
|
||
math.floor(counter / 16777216) % 256, math.floor(counter / 65536) % 256,
|
||
math.floor(counter / 256) % 256, counter % 256)
|
||
out = out .. sha256_hex(prefix .. be)
|
||
counter = counter + 1
|
||
end
|
||
return out:sub(1, nbytes * 2)
|
||
end
|
||
|
||
-- traeDeriveDeviceId15 / traeDeriveMarketUserId / traeDeriveSessionId：
|
||
-- 基于 user_id 的确定性设备身份。参考注释点明：每个账号天然不同设备，
|
||
-- 所以签到**不再需要**在遇到 9074 时换设备号重试（早期做法已废弃）。
|
||
traeDeriveDeviceId15 = function(userId)
|
||
local hex = traeDeriveStream(userId, "devid", 15)
|
||
local out = {}
|
||
for i = 1, 15 do
|
||
-- 按字节取模 10：两 hex 字符 = 1 字节
|
||
local b = tonumber(hex:sub((i - 1) * 2 + 1, i * 2), 16)
|
||
out[#out + 1] = tostring(b % 10)
|
||
end
|
||
return table.concat(out)
|
||
end
|
||
|
||
traeDeriveMarketUserId = function(userId)
|
||
local h = traeDeriveStream(userId, "market", 16)
|
||
local bs = {}
|
||
for i = 1, 16 do bs[i] = tonumber(h:sub((i - 1) * 2 + 1, i * 2), 16) end
|
||
bs[7] = (bs[7] % 16) + 64 -- version 4（bs 下标从 1 起，故是第 7 个）
|
||
bs[9] = (bs[9] % 64) + 128 -- variant RFC 4122
|
||
local hx = {}
|
||
for i = 1, 16 do hx[i] = ("%02x"):format(bs[i]) end
|
||
local s = table.concat(hx)
|
||
return s:sub(1, 8) .. "-" .. s:sub(9, 12) .. "-" .. s:sub(13, 16)
|
||
.. "-" .. s:sub(17, 20) .. "-" .. s:sub(21, 32)
|
||
end
|
||
|
||
traeDeriveSessionId = function(userId)
|
||
return traeDeriveStream(userId, "sess", 32)
|
||
end
|
||
|
||
-- utf8Encode(cp)：码点 → UTF-8 字节串（Lua 5.1 无 utf8.char）。
|
||
local function utf8Encode(cp)
|
||
if cp < 0x80 then return string.char(cp) end
|
||
if cp < 0x800 then
|
||
return string.char(0xC0 + math.floor(cp / 64), 0x80 + cp % 64)
|
||
end
|
||
if cp < 0x10000 then
|
||
return string.char(0xE0 + math.floor(cp / 4096),
|
||
0x80 + math.floor(cp / 64) % 64, 0x80 + cp % 64)
|
||
end
|
||
return string.char(0xF0 + math.floor(cp / 262144),
|
||
0x80 + math.floor(cp / 4096) % 64, 0x80 + math.floor(cp / 64) % 64, 0x80 + cp % 64)
|
||
end
|
||
|
||
-- latin1ToUtf8(s)：把「每字符=一原始字节」的串重按 UTF-8 解一次。
|
||
--
|
||
-- 这是参考 fixNicknameMojibake 里 `Buffer.from(raw,'latin1').toString('utf8')`
|
||
-- 的等价物：TRAE 回调的中文被错按 latin-1 解了一次，实测昵称变成
|
||
-- `Óû§8847309959` 这类乱码。返回 (修复串, true) 或 (nil, false)。
|
||
local function latin1ToUtf8(s)
|
||
local out, i, n = {}, 1, #s
|
||
while i <= n do
|
||
local b = string.byte(s, i)
|
||
if not b then break end
|
||
local cp, len
|
||
if b < 0x80 then cp, len = b, 1
|
||
elseif b >= 0xC2 and b <= 0xDF then cp, len = b - 0xC0, 2
|
||
elseif b >= 0xE0 and b <= 0xEF then cp, len = b - 0xE0, 3
|
||
elseif b >= 0xF0 and b <= 0xF4 then cp, len = b - 0xF0, 4
|
||
else return nil, false end
|
||
if i + len - 1 > n then return nil, false end
|
||
for k = 1, len - 1 do
|
||
local cb = string.byte(s, i + k)
|
||
if not cb or cb < 0x80 or cb > 0xBF then return nil, false end
|
||
cp = cp * 64 + (cb - 0x80)
|
||
end
|
||
-- 拒绝非最短编码、代理区与越界（否则会把垃圾字节当合法字符）
|
||
if (len == 2 and cp < 0x80) or (len == 3 and cp < 0x800)
|
||
or (len == 4 and cp < 0x10000) or cp > 0x10FFFF
|
||
or (cp >= 0xD800 and cp <= 0xDFFF) then
|
||
return nil, false
|
||
end
|
||
out[#out + 1] = utf8Encode(cp)
|
||
i = i + len
|
||
end
|
||
return table.concat(out), true
|
||
end
|
||
|
||
-- hasCJK(s)：是否含 CJK 汉字（UTF-8 三字节，U+4E00–U+9FFF）。
|
||
-- 照参考 `/\u4e00-\u9fff/`：无 CJK 则判乱码，回退可读占位。
|
||
local function hasCJK(s)
|
||
if type(s) ~= "string" then return false end
|
||
local i = 1
|
||
while i <= #s do
|
||
local b = string.byte(s, i)
|
||
if b and b >= 0xE4 and b <= 0xE9 then
|
||
local b2, b3 = string.byte(s, i + 1), string.byte(s, i + 2)
|
||
if b2 and b3 and b2 >= 0x80 and b2 <= 0xBF and b3 >= 0x80 and b3 <= 0xBF then
|
||
local cp = (b - 0xE0) * 4096 + (b2 - 0x80) * 64 + (b3 - 0x80)
|
||
if cp >= 0x4E00 and cp <= 0x9FFF then return true end
|
||
end
|
||
end
|
||
i = i + 1
|
||
end
|
||
return false
|
||
end
|
||
|
||
-- traeFixNickname(raw, uid)：照参考 fixNicknameMojibake 的两级处理。
|
||
-- ① 先试 latin1→utf8 回转（结果含 CJK 才采用）；
|
||
-- ② 不行且无 CJK → 「用户+uid末4位」占位（绝不把乱码写进凭据）。
|
||
traeFixNickname = function(raw, uid)
|
||
if raw == nil or raw == "" then return raw or "" end
|
||
local fixed, ok = latin1ToUtf8(raw)
|
||
if ok and fixed ~= "" and hasCJK(fixed) then return fixed end
|
||
if not hasCJK(raw) then
|
||
return "\231\148\168\230\136\183" .. tostring(uid):sub(-4)
|
||
end
|
||
return raw
|
||
end
|
||
|
||
-- traeCheckinHeaders(plat, cred, uid)：签到/积分请求头。
|
||
--
|
||
-- 参考注释点明：简化头（仅 Authorization + 少量 Ug 头）**实测签到失败**；
|
||
-- 真正成功的是约 20 个客户端头。关键差别：X-Device-Id 用的是
|
||
-- **基于 user_id 确定性派生的 15 位数字**（不是凭据里的 hex32）。
|
||
-- 授权方案是 `Cloud-IDE-JWT`（不是 Bearer）—— 用错前缀是 401 级失败。
|
||
-- 依赖：plat.checkin.auth 声明方案（trae 声明 cloud-ide-jwt）。
|
||
traeCheckinHeaders = function(plat, cred, uid)
|
||
uid = uid or cred.uid or ""
|
||
if uid == "" then return nil, "缺少 user_id，无法构造设备身份" end
|
||
local h = {
|
||
["Authorization"] = "Cloud-IDE-JWT " .. tostring(cred.access_token or ""),
|
||
["Content-Type"] = "application/json",
|
||
["Accept"] = "*/*",
|
||
["Accept-Language"] = "zh-CN",
|
||
["User-Agent"] = "VSCode 1.107.1 (TRAE SOLO CN)",
|
||
["X-Market-Client-Id"] = "VSCode 1.107.1",
|
||
["X-Market-User-Id"] = traeDeriveMarketUserId(uid),
|
||
["X-User-Region"] = "CN",
|
||
["X-Device-Id"] = traeDeriveDeviceId15(uid),
|
||
["X-Lgw-Req-Sdk-Type"] = "3",
|
||
["Package-Type"] = "stable_cn",
|
||
["X-Lscbd-Aid"] = "787976",
|
||
["X-Lscbd-Platform"] = "windows",
|
||
["App-Version"] = plat.ide_version or "0.1.52",
|
||
["Vscode-Sessionid"] = traeDeriveSessionId(uid),
|
||
["Sec-Fetch-Dest"] = "empty",
|
||
}
|
||
-- 每次请求独立的 trace/request id（形如 00-<hex16>-01 / uuid v4）
|
||
h["X-Tt-Trace-Id"] = "00-" .. newToken():sub(1, 16) .. "-01"
|
||
local r = newToken()
|
||
h["X-Request-Id"] = r:sub(1, 8) .. "-" .. r:sub(9, 12) .. "-4" .. r:sub(14, 16)
|
||
.. "-8" .. r:sub(18, 20) .. "-" .. r:sub(21, 32)
|
||
return h, nil
|
||
end
|
||
|
||
-- 表驱动签到推广到需自定义头的平台：在 PLATFORMS 定义后绑定。
|
||
--
|
||
-- credentialRef 是「秘密引用」，creds 是插件自解密后的 JSON（最可靠）。
|
||
do
|
||
for _, p in ipairs(PLATFORMS) do
|
||
if p.checkin and p.checkin.auth == "cloud-ide-jwt" then
|
||
p.claim_fn = function(plat, tok, args)
|
||
local cred = (args and args.credential) or { access_token = tok }
|
||
local uid = (args and args.uid) or cred.uid
|
||
or (type(cred.user_id) == "string" and cred.user_id) or ""
|
||
local h, herr = traeCheckinHeaders(plat, cred, uid)
|
||
if herr then return nil, herr end
|
||
return { url = plat.checkin.url, method = plat.checkin.method or "POST",
|
||
headers = h, body = plat.checkin.body or "{}" }
|
||
end
|
||
end
|
||
end
|
||
end
|
||
|
||
-- plugin.__trae_derive_probe 只给测试做差分用（拿参考实现生成的期望值比对）。
|
||
-- 不挂 HTTP 路由、不暴露给 UI；它必须在派生函数**定义之后**才存在，
|
||
-- 因为它们都是 local，插件的 plugin 表又建得早。
|
||
function plugin.__trae_derive_probe(args)
|
||
local uid = tostring((type(args) == "table" and args.uid) or "")
|
||
return { json = { devid = traeDeriveDeviceId15(uid),
|
||
market = traeDeriveMarketUserId(uid),
|
||
sess = traeDeriveSessionId(uid) } }
|
||
end
|
||
|
||
-- plugin.on_unload：插件被卸载/重载时回收自己拉起的浏览器栈。进程是插件起的，
|
||
-- 收尾也是插件的责任 —— 内核不应知道这些进程的存在。
|
||
plugin.on_unload = function()
|
||
reapBrowser()
|
||
-- 回调接收器也是本插件起的进程，卸载/重载时一并回收。
|
||
-- 不能只收浏览器栈：否则每次插件重载都留下一批 python 监听。
|
||
for id in pairs(plugin.state.loopbacks or {}) do
|
||
reapLoopback(id)
|
||
end
|
||
end
|
||
|
||
-- ============================================================================
|
||
-- UI：独立标签页（登录 / 认证 / 配置）
|
||
-- ============================================================================
|
||
|
||
plugin.ui = {
|
||
page = {
|
||
page_id = "channels",
|
||
title = "账号接入",
|
||
icon = "",
|
||
order = 40,
|
||
mount = [[
|
||
<div id="channels-page">
|
||
<div class="card">
|
||
<div style="display:flex;align-items:center;justify-content:space-between;gap:12px;flex-wrap:wrap">
|
||
<h2 style="margin:0">渠道控制台</h2>
|
||
<div style="display:flex;gap:10px;align-items:center;flex-wrap:wrap">
|
||
<input id="ch-search" placeholder="搜索渠道或供应商…" style="padding:6px 10px;border:1px solid var(--line);border-radius:8px;background:var(--bg);color:var(--fg);min-width:200px">
|
||
<div id="ch-filters" style="display:flex;gap:6px"></div>
|
||
<button class="small" onclick="chLedger()">Token 用量</button>
|
||
<button class="small" onclick="chBackup(1)">导出备份</button>
|
||
<button class="small" onclick="document.getElementById('ch-import-file').click()">导入备份</button>
|
||
<input type="file" id="ch-import-file" hidden accept=".json,application/json" onchange="chImportFile(event)">
|
||
<label style="display:flex;gap:6px;align-items:center;font-size:12px">
|
||
<input type="checkbox" id="ch-auto" onchange="chAutoToggle(this.checked)"> 每日自动签到
|
||
</label>
|
||
</div>
|
||
</div>
|
||
<div id="ch-summary" style="display:flex;gap:18px;margin:10px 0;font-size:13px;color:var(--muted,#888)"></div>
|
||
<div id="ch-grid" style="display:grid;grid-template-columns:repeat(auto-fill,minmax(280px,1fr));gap:12px"></div>
|
||
</div>
|
||
|
||
<!-- 渠道详情：账号池 + 模型开关（对齐参考 provider-detail） -->
|
||
<div class="card" id="ch-detail" style="display:none">
|
||
<div style="display:flex;justify-content:space-between;align-items:center">
|
||
<button class="small" onclick="chSelect(undefined)">← 返回全部渠道</button>
|
||
<span class="muted" style="font-size:12px">账号凭据加密保存在服务端，页面永远拿不到明文。</span>
|
||
</div>
|
||
<h2 id="ch-detail-name" style="margin:10px 0 4px"></h2>
|
||
<p class="muted" id="ch-detail-org" style="margin:0 0 12px;font-size:13px"></p>
|
||
|
||
<div id="ch-detail-actions" style="display:flex;gap:8px;flex-wrap:wrap;margin-bottom:10px"></div>
|
||
<p id="ch-notice" class="muted" style="font-size:13px;min-height:18px"></p>
|
||
|
||
<div id="ch-accts"></div>
|
||
|
||
<div style="display:flex;gap:8px;align-items:center;margin:14px 0 6px">
|
||
<b style="font-size:13px">模型</b>
|
||
<span id="ch-model-count" class="muted" style="font-size:12px"></span>
|
||
<button class="small" onclick="chModelAll(false)">全部启用</button>
|
||
<button class="small" onclick="chModelAll(true)">全部关闭</button>
|
||
<button class="small" onclick="chModelRefresh()">从上游拉取</button>
|
||
<span id="ch-model-src" class="muted" style="font-size:11px"></span>
|
||
</div>
|
||
<div id="ch-models" style="display:flex;flex-direction:column;gap:4px"></div>
|
||
|
||
<!-- 登录区：发起登录后显示（device-poll 轮询 / callback URL / vnc / paste / manual） -->
|
||
<div id="ch-login-box" style="display:none;margin-top:14px;border-top:1px solid var(--line);padding-top:10px">
|
||
<h3 style="margin:4px 0">登录</h3>
|
||
<div id="ch-login-body"></div>
|
||
<div id="ch-vnc-wrap" style="display:none;margin-top:10px">
|
||
<p class="muted" style="font-size:12px">请在下面的窗口里完成登录，完成后本页会自动继续。</p>
|
||
<iframe id="ch-vnc" style="width:100%;height:640px;border:1px solid var(--line);border-radius:8px" allow="clipboard-read; clipboard-write"></iframe>
|
||
</div>
|
||
</div>
|
||
|
||
<h3 style="margin:16px 0 6px;font-size:13px">最近日志</h3>
|
||
<ul id="ch-log" style="font-size:12px;margin:0;padding-left:18px"></ul>
|
||
</div>
|
||
</div>
|
||
<script>
|
||
(function () {
|
||
const q = (s) => document.querySelector(s);
|
||
const esc = (v) => String(v == null ? "" : v).replace(/[&<>"]/g, (c) => ({ "&": "&", "<": "<", ">": ">", '"': """ }[c]));
|
||
async function call(path, method, body) {
|
||
const r = await fetch("/api/plugins/http/" + path, {
|
||
method: method || "GET",
|
||
headers: { "Content-Type": "application/json" },
|
||
credentials: "same-origin",
|
||
body: body ? JSON.stringify(body) : undefined,
|
||
});
|
||
return await r.json().catch(() => ({}));
|
||
}
|
||
// POST 端点统一走 call(path,"POST",...)；账号/模型/供应商操作都按这个形状。
|
||
let state = { statuses: [], filter: "all", search: "", selected: undefined,
|
||
accounts: undefined, models: undefined, login: null, pollTimer: null };
|
||
const stopPoll = () => { if (state.pollTimer) { clearInterval(state.pollTimer); state.pollTimer = null; } };
|
||
|
||
async function loadStatuses() {
|
||
const j = await call("channels/provider/status", "POST", {});
|
||
state.statuses = j.statuses || [];
|
||
renderSummary(); renderGrid();
|
||
const sj = await call("channels/status");
|
||
const log = q("#ch-log"); if (log) log.innerHTML = (sj.log || []).map((e) => "<li>" + esc(e.msg) + "</li>").join("");
|
||
const aj = await call("channels/auto_checkin", "POST", {});
|
||
q("#ch-auto").checked = aj.autoCheckin !== false;
|
||
}
|
||
|
||
function renderSummary() {
|
||
const total = state.statuses.length;
|
||
const connected = state.statuses.filter((s) => !s.closed && s.accounts.enabled > 0).length;
|
||
const accounts = state.statuses.reduce((n, s) => n + (s.accounts.total || 0), 0);
|
||
q("#ch-summary").innerHTML =
|
||
"<span>已接入渠道 <b>" + connected + " / " + total + "</b></span>" +
|
||
"<span>本机账号 <b>" + accounts + "</b></span>";
|
||
const counts = { all: total, connected, pending: total - connected };
|
||
const defs = [{ id: "all", label: "全部" }, { id: "connected", label: "已接入" }, { id: "pending", label: "待接入" }];
|
||
q("#ch-filters").innerHTML = defs.map((d) =>
|
||
'<button class="small" data-f="' + d.id + '" style="' + (state.filter===d.id?"font-weight:bold;":"") + '" onclick="chFilter(\'' + d.id + '\')">' + d.label + ' (' + counts[d.id] + ')</button>').join("");
|
||
}
|
||
|
||
function renderGrid() {
|
||
const list = state.statuses.filter((s) => {
|
||
const hit = (s.id + " " + s.name).toLowerCase().includes(state.search);
|
||
const on = !s.closed && s.accounts.enabled > 0;
|
||
return hit && (state.filter === "all" || (state.filter === "connected") === on);
|
||
});
|
||
q("#ch-grid").innerHTML = list.map((s) => {
|
||
const on = !s.closed && s.accounts.enabled > 0;
|
||
const st = s.closed ? '<span class="tag">已关闭</span>'
|
||
: on ? '<span class="tag tag-green">已接入</span>' : '<span class="tag">待接入</span>';
|
||
return '<div class="card" style="margin:0;padding:12px;cursor:pointer" onclick="chSelect(\'' + esc(s.id) + '\')">' +
|
||
'<div style="display:flex;justify-content:space-between;align-items:center">' +
|
||
'<b>' + esc(s.name) + '</b>' + st + '</div>' +
|
||
'<div class="muted" style="font-size:12px;margin:6px 0">' + esc(s.id) + ' · ' + esc(s.flow) + '</div>' +
|
||
'<div style="font-size:12px">账号 <b>' + (s.accounts.enabled||0) + '/' + (s.accounts.total||0) + '</b>' +
|
||
' · 模型 <b>' + ((s.models.total||0)-(s.models.disabled||0)) + '/' + (s.models.total||0) + '</b></div>' +
|
||
'</div>';
|
||
}).join("") || '<p class="muted">没有匹配的渠道</p>';
|
||
}
|
||
|
||
async function renderDetail() {
|
||
const id = state.selected;
|
||
const box = q("#ch-detail");
|
||
if (!id) { box.style.display = "none"; q("#ch-grid").parentElement.style.display = "block"; return; }
|
||
box.style.display = "block";
|
||
q("#ch-grid").parentElement.style.display = "none";
|
||
const s = state.statuses.find((x) => x.id === id) || {};
|
||
q("#ch-detail-name").textContent = s.name || id;
|
||
q("#ch-detail-org").textContent = id + " · " + (s.flow || "");
|
||
const cap = (await call("channels/auto_checkin","POST",{})) && true; // noop，保持顺序
|
||
// 动作区：登录（加账号）/ 刷新全部 / 一键领取 / 供应商开关
|
||
const acts = [];
|
||
acts.push('<button class="small" onclick="chStartLogin()">添加账号（登录）</button>');
|
||
if ((s.accounts.total||0) > 0) acts.push('<button class="small" onclick="chRefreshAll()">刷新全部账号</button>');
|
||
acts.push('<button class="small" onclick="chClaimAll()">一键领取额度</button>');
|
||
acts.push('<button class="small" onclick="chResetAll()">重置限流标记</button>');
|
||
acts.push('<button class="small" onclick="chClearDead()">清死模型</button>');
|
||
acts.push('<button class="small" onclick="chProviderToggle(' + (!s.closed) + ')">' + (s.closed ? "启用渠道" : "关闭渠道") + '</button>');
|
||
q("#ch-detail-actions").innerHTML = acts.join(" ");
|
||
q("#ch-notice").textContent = "";
|
||
await Promise.all([renderAccounts(id), renderModels(id)]);
|
||
}
|
||
|
||
async function renderAccounts(id) {
|
||
const j = await call("channels/account/list", "POST", { platform: id });
|
||
const accts = j.accounts || [];
|
||
state.accounts = accts;
|
||
// 逐账号余额（credits.balances 对齐参考；无端点平台如实显示不可用）
|
||
let balances = {};
|
||
try {
|
||
const bj = await call("channels/credits/balances", "POST", { platform: id });
|
||
for (const row of (bj.accounts || [])) balances[row.accountId] = row;
|
||
} catch {}
|
||
q("#ch-accts").innerHTML = accts.length === 0
|
||
? '<p class="muted" style="font-size:13px">暂无账号。点「添加账号（登录）」开始。</p>'
|
||
: accts.map((a) => {
|
||
const badge = a.has_credential
|
||
? (a.enabled !== false ? '<span class="tag tag-green">启用</span>' : '<span class="tag">停用</span>')
|
||
: '<span class="tag">待凭据</span>';
|
||
const claimTxt = a.last_claim ? ('上次领取 ' + new Date(a.last_claim*1000).toLocaleString() + (a.last_claim_summary ? ' · ' + esc(a.last_claim_summary) : '')) : '';
|
||
const b = balances[a.id];
|
||
const balTxt = !b ? '' : b.balance && typeof b.balance.total === 'number'
|
||
? '<span class="tag tag-green">' + esc(b.balance.unit || 'credits') + ' ' + b.balance.total + '</span>'
|
||
: '<span class="muted" title="' + esc(b.error || '') + '" style="font-size:12px">余额不可用</span>';
|
||
return '<div style="display:flex;gap:8px;align-items:center;padding:6px 0;border-bottom:1px dashed var(--line);flex-wrap:wrap">' +
|
||
'<b style="min-width:120px">' + esc(a.nickname || a.id) + '</b>' + badge + balTxt +
|
||
'<span class="muted" style="font-size:12px">' + claimTxt + '</span>' +
|
||
'<span style="flex:1"></span>' +
|
||
'<button class="small" onclick="chAcct(\'' + esc(a.id) + '\',\'test\')">测试</button>' +
|
||
'<button class="small" onclick="chAcct(\'' + esc(a.id) + '\',\'refresh\')">刷新</button>' +
|
||
'<button class="small" onclick="chAcct(\'' + esc(a.id) + '\',\'toggle\')">' + (a.enabled !== false ? "停用" : "启用") + '</button>' +
|
||
'<button class="small" onclick="chAcct(\'' + esc(a.id) + '\',\'priority\')">优先</button>' +
|
||
'<button class="small" onclick="chAcct(\'' + esc(a.id) + '\',\'delete\')">删除</button>' +
|
||
'</div>';
|
||
}).join("");
|
||
}
|
||
|
||
window.chModelRefresh = async () => {
|
||
const id = state.sel && state.sel.id;
|
||
if (!id) return;
|
||
const r = await call("channels/model/refresh", "POST", { platform: id });
|
||
const res = (r.results || [])[0] || {};
|
||
if (res.ok) alert("已从上游拉取 " + res.count + " 个模型");
|
||
else alert("拉取失败：" + (res.error || "未知错误") + "（保留既有目录）");
|
||
await renderModels(id);
|
||
};
|
||
|
||
async function renderModels(id) {
|
||
const j = await call("channels/model/list", "POST", { platform: id });
|
||
const ms = j.models || [];
|
||
state.models = ms;
|
||
const on = ms.filter((m) => !m.disabled).length;
|
||
q("#ch-model-count").textContent = on + "/" + ms.length + " 启用";
|
||
// 目录来源：远端拉到的目录以远端为准、兜底补位；没拉过则只有兜底。
|
||
const src = q("#ch-model-src");
|
||
if (src) {
|
||
if (j.remote) {
|
||
const t = j.fetched_at ? new Date(j.fetched_at * 1000).toLocaleString() : "";
|
||
src.textContent = "上游目录（" + t + "）";
|
||
} else {
|
||
src.textContent = "内置兜底目录（未从上游拉取）";
|
||
}
|
||
}
|
||
q("#ch-models").innerHTML = ms.map((m) =>
|
||
'<div style="display:flex;gap:8px;align-items:center;padding:4px 0">' +
|
||
'<span style="flex:1;font-size:13px" title="' + esc(m.id) + '">' + esc(m.name || m.id) + '</span>' +
|
||
'<button class="small" onclick="chModel(\'' + esc(m.id) + '\',' + (!m.disabled) + ')">' + (m.disabled ? "开启" : "关闭") + '</button>' +
|
||
'</div>').join("") || '<p class="muted">—</p>';
|
||
}
|
||
|
||
// ---- 动作 ----
|
||
window.chFilter = (f) => { state.filter = f; renderSummary(); renderGrid(); };
|
||
q("#ch-search").addEventListener("input", (e) => { state.search = e.target.value.toLowerCase(); renderGrid(); });
|
||
window.chSelect = async (id) => { state.selected = id; await renderDetail(); };
|
||
window.chAcct = async (aid, act) => {
|
||
const id = state.selected; if (!id) return;
|
||
if (act === "delete" && !confirm("删除账号 " + aid + "？（连同凭据与上游源）")) return;
|
||
if (act === "toggle") {
|
||
const a = (state.accounts || []).find((x) => x.id === aid);
|
||
await call("channels/account/update", "POST", { platform: id, account_id: aid, patch: { enabled: !(a && a.enabled !== false) } });
|
||
} else if (act === "priority") {
|
||
await call("channels/account/reorder", "POST", { platform: id, ordered_ids: [aid].concat((state.accounts||[]).map((x)=>x.id).filter((x)=>x!==aid)) });
|
||
} else {
|
||
await call("channels/account/" + act, "POST", { platform: id, account_id: aid });
|
||
}
|
||
await renderAccounts(id); await loadStatuses();
|
||
};
|
||
window.chModel = async (mid, disabled) => {
|
||
const id = state.selected; if (!id) return;
|
||
await call("channels/model/set_disabled", "POST", { platform: id, model_id: mid, disabled });
|
||
await renderModels(id); await loadStatuses();
|
||
};
|
||
window.chModelAll = async (disabled) => {
|
||
const id = state.selected; if (!id) return;
|
||
await call("channels/model/set_all_disabled", "POST", { platform: id, disabled });
|
||
await renderModels(id); await loadStatuses();
|
||
};
|
||
window.chProviderToggle = async (enable) => {
|
||
const id = state.selected; if (!id) return;
|
||
if (!enable && !confirm("关闭渠道会停用全部账号与模型，确认？")) return;
|
||
await call("channels/provider/set_enabled", "POST", { platform: id, enabled: enable });
|
||
await loadStatuses(); await renderDetail();
|
||
};
|
||
window.chRefreshAll = async () => {
|
||
const id = state.selected; if (!id) return;
|
||
for (const a of state.accounts || []) await call("channels/account/refresh", "POST", { platform: id, account_id: a.id });
|
||
notice("已刷新全部账号"); await renderAccounts(id);
|
||
};
|
||
window.chClaimAll = async () => {
|
||
const id = state.selected; if (!id) return;
|
||
notice("领取中…");
|
||
const j = await call("channels/credits/claim_all", "POST", { platform: id });
|
||
const res = j.results || [];
|
||
const okN = res.filter((r) => r.outcome && r.outcome.kind === "success").length;
|
||
const failN = res.filter((r) => r.outcome && r.outcome.kind === "failed");
|
||
notice("领取完成：成功 " + okN + " 个账号" + (failN.length ? "；失败：" + failN.map((r) => r.outcome.message).join("；") : ""));
|
||
await renderAccounts(id);
|
||
};
|
||
window.chAutoToggle = async (on) => { await call("channels/auto_checkin", "POST", { enabled: on }); notice(on ? "自动签到已开启" : "自动签到已关闭"); };
|
||
window.chResetAll = async () => {
|
||
const id = state.selected; if (!id) return;
|
||
await call("channels/account/reset", "POST", { platform: id, account_id: "__all__" });
|
||
notice("已重置全部账号限流标记");
|
||
};
|
||
window.chClearDead = async () => {
|
||
const id = state.selected; if (!id) return;
|
||
const j = await call("channels/model/clear_dead", "POST", { platform: id });
|
||
const removed = (j.removed || []).length;
|
||
notice(removed ? ("已清理 " + removed + " 个死模型") : "没有死模型");
|
||
await renderModels(id);
|
||
};
|
||
// 用量快照（usage.tokenLedger 对齐参考）：弹窗展示 prompt/completion/请求数
|
||
window.chLedger = async () => {
|
||
const j = await call("channels/usage/token_ledger", "POST", { limit: 100 });
|
||
const s = j.snapshot || {};
|
||
if (!s.available) { alert("用量不可用：" + (s.error || "未知")); return; }
|
||
alert("本网关 token 用量\nPrompt: " + (s.tokens?.prompt ?? 0) + "\nCompletion: " + (s.tokens?.completion ?? 0) +
|
||
"\nTotal: " + (s.tokens?.total ?? 0) + "\nRequests: " + (s.requests ?? 0));
|
||
};
|
||
window.chBackup = async () => {
|
||
const j = await call("channels/backup/export", "POST", {});
|
||
const blob = new Blob([JSON.stringify(j.payload, null, 2)], { type: "application/json" });
|
||
const a = document.createElement("a");
|
||
a.href = URL.createObjectURL(blob);
|
||
a.download = "channels-backup-" + new Date().toISOString().slice(0,10) + ".json";
|
||
a.click(); setTimeout(() => URL.revokeObjectURL(a.href), 5000);
|
||
};
|
||
window.chImportFile = async (ev) => {
|
||
const f = ev.target.files[0]; ev.target.value = ""; if (!f) return;
|
||
if (f.size > 8*1024*1024) { alert("备份文件不能超过 8MB"); return; }
|
||
if (!confirm("导入会合并备份中的账号凭据、模型开关与自动签到设置，确认？")) return;
|
||
const payload = JSON.parse(await f.text());
|
||
const j = await call("channels/backup/import", "POST", { payload });
|
||
alert(j.error ? ("导入失败：" + j.error) : ("已导入，恢复 " + (j.restored||0) + " 条凭据"));
|
||
await loadStatuses();
|
||
};
|
||
function notice(msg) { q("#ch-notice").textContent = msg; }
|
||
|
||
// ---- 登录（对齐参考两步式：立即拿 URL/弹窗，后台轮询完成）----
|
||
window.chStartLogin = async () => {
|
||
const id = state.selected; if (!id) return;
|
||
// 池路径：先建占位账号，登录完成后回填凭据到这个账号
|
||
const aj = await call("channels/account/add", "POST", { platform: id });
|
||
if (aj.error) { alert(aj.error); return; }
|
||
const aid = aj.account_id;
|
||
const j = await call("channels/login", "POST", { platform: id, account_id: aid });
|
||
if (j.error) { alert(j.error); return; }
|
||
const box = q("#ch-login-box"); box.style.display = "block";
|
||
const vnc = q("#ch-vnc-wrap");
|
||
if (j.view_url) {
|
||
q("#ch-login-body").innerHTML = "<p class='muted' id='ch-login-state'>请在下方窗口完成登录…</p>";
|
||
vnc.style.display = "block"; q("#ch-vnc").src = j.view_url;
|
||
} else if (j.manual_hint) {
|
||
vnc.style.display = "none";
|
||
q("#ch-login-body").innerHTML =
|
||
"<p class='muted'>" + esc(j.manual_hint) + "</p>" +
|
||
"<p><textarea id='ch-cred' rows='3' style='width:100%' placeholder='把凭据粘贴到这里'></textarea></p>" +
|
||
"<p><button class='small' onclick='chPaste(\"" + esc(aid) + "\")'>提交凭据到该账号</button></p>" +
|
||
"<p class='muted' id='ch-login-state'></p>";
|
||
} else if (j.session && j.session.flow === "paste") {
|
||
vnc.style.display = "none";
|
||
q("#ch-login-body").innerHTML =
|
||
"<p>把该平台的 API key / token 粘贴到这里：</p>" +
|
||
"<p><textarea id='ch-cred' rows='3' style='width:100%' placeholder='API key / token'></textarea></p>" +
|
||
"<p><button class='small' onclick='chPaste(\"" + esc(aid) + "\")'>提交凭据到该账号</button></p>" +
|
||
"<p class='muted' id='ch-login-state'></p>";
|
||
} else {
|
||
vnc.style.display = "none";
|
||
q("#ch-login-body").innerHTML =
|
||
"<p>请在你自己的浏览器打开下面的地址完成登录：</p>" +
|
||
"<p><a href='" + esc(j.url) + "' target='_blank' rel='noopener'>" + esc(j.url) + "</a></p>" +
|
||
(j.session && j.session.user_code ? "<p>设备码：<b>" + esc(j.session.user_code) + "</b></p>" : "") +
|
||
"<p class='muted' id='ch-login-state'>等待完成…</p>";
|
||
}
|
||
stopPoll();
|
||
if (!(j.manual_hint || (j.session && j.session.flow === "paste"))) {
|
||
state.pollTimer = setInterval(async () => {
|
||
const st = await call("channels/login/status?id=" + encodeURIComponent(j.session.id));
|
||
const el = q("#ch-login-state"); if (el) el.textContent = "状态：" + st.state + (st.account ? "（" + st.account + "）" : "");
|
||
if (st.state === "completed" || st.state === "failed" || st.state === "expired") {
|
||
stopPoll(); q("#ch-vnc").src = "about:blank"; vnc.style.display = "none";
|
||
box.style.display = "none";
|
||
if (st.state === "failed") notice("登录未完成：" + (st.message || st.state));
|
||
await renderAccounts(id); await loadStatuses();
|
||
}
|
||
}, 2000);
|
||
}
|
||
};
|
||
// paste / manual 的凭据提交：落到占位账号（池路径），完成即同步源
|
||
window.chPaste = async (aid) => {
|
||
const id = state.selected; if (!id || !aid) return;
|
||
const cred = (q("#ch-cred") && q("#ch-cred").value || "").trim();
|
||
if (!cred) { alert("凭据为空"); return; }
|
||
const el = q("#ch-login-state"); if (el) el.textContent = "提交中…";
|
||
const j = await call("channels/login/complete", "POST", { platform: id, credential: cred, account_id: aid });
|
||
if (j.error) { if (el) el.textContent = "失败：" + j.error; return; }
|
||
q("#ch-login-box").style.display = "none"; q("#ch-cred").value = "";
|
||
notice("账号已接入：" + aid);
|
||
await renderAccounts(id); await loadStatuses();
|
||
};
|
||
|
||
loadStatuses();
|
||
})();
|
||
</script>
|
||
]],
|
||
},
|
||
}
|
||
|
||
return plugin
|